|
US$344.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 3883.202-2019: Safety of motor-operated hand-held, transportable and garden tools -- Part 202: Particular requirements for hand-held screwdrivers and impact wrenches
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 3883.202-2019 | English | 344 |
Add to Cart
|
3 days [Need to translate]
|
Safety of motor-operated hand-held, transportable and garden tools -- Part 202: Particular requirements for hand-held screwdrivers and impact wrenches
| Valid |
GB/T 3883.202-2019
|
PDF similar to GB/T 3883.202-2019
Basic data | Standard ID | GB/T 3883.202-2019 (GB/T3883.202-2019) | | Description (Translated English) | Safety of motor-operated hand-held, transportable and garden tools -- Part 202: Particular requirements for hand-held screwdrivers and impact wrenches | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | K64 | | Classification of International Standard | 25.140.20 | | Word Count Estimation | 18,189 | | Date of Issue | 2019-10-18 | | Date of Implementation | 2020-05-01 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 3883.202-2019: Safety of motor-operated hand-held, transportable and garden tools -- Part 202: Particular requirements for hand-held screwdrivers and impact wrenches
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Safety of motor-operated hand-held, transportable and garden tools--Part 202. Particular requirements for hand-held screwdrivers and impact wrenches
ICS 25.140.20
K64
National Standards of People's Republic of China
Replace GB/T 3883.2-2012
Safety of hand-held, portable power tools and garden tools
Part 202. Hand-held screwdrivers and impact wrenches
Special requirements
Part 202.Particularrequirementsforhand-held
(IEC 62841-2-2.2014, Electricmotor-operatedhand-heldtools, transportable
toolsandlawnandgardenmachinery-Safety-Part 2-2.Particular
2019-10-18 released 2020-05-01 implementation
State market supervision and administration
China National Standardization Administration issued
Content
Foreword I
Introduction III
1 Scope 1
2 Normative references 1
3 Terms and Definitions 1
4 General requirements 1
5 test general conditions 1
6 Radiation, toxicity and similar hazards 2
7 Category 2
8 logo and instructions 2
9 Protection against access to live parts 2
10 start 2
11 input power and current 2
12 fever 2
13 Heat resistance and flame retardancy 2
14 moisture resistance 3
15 rust prevention 3
16 Overload protection of transformers and their associated circuits 3
17 Durability 3
18 abnormal operation 3
19 Mechanical hazard 4
20 mechanical strength 4
21 structure 4
22 internal wiring 4
23 component 4
24 power connection and external cord 4
25 External wiring terminal block 5
26 Grounding device 5
27 screws and connectors 5
28 creepage distance, clearance and insulation penetration distance 5
Appendix 6
Appendix I (informative) Measurement of noise and vibration 7
Appendix K (Normative) Battery-based tools and battery packs 12
Reference 13
Foreword
Part 2 of the Handheld, Portable Power Tools and Garden Tools Safety Handheld Power Tools, currently consisting of the following 5 parts
composition.
---GB/T 3883.201-2017 Safety of hand-held, portable power tools and garden tools - Part 2. Drills and impact
Special requirements for electric drills;
Special requirements for wire cutters and impact wrenches;
--- GB/T 3883.204-2019 Safety of hand-held, portable power tools and garden tools - Part 204. Hand-held
Special requirements for disc sanders and polishing machines;
--- GB/T 3883.205-2019 Safety of hand-held, portable power tools and garden tools - Part 205. Hand-held
Special requirements for saws;
--- GB/T 3883.210-2019 Safety of hand-held, portable power tools and garden tools - Part 210. Hand-held
Special requirements for planing.
This part is the 202 part of GB/T 3883.
This part is drafted in accordance with the rules given in GB/T 1.1-2009.
This part replaces GB/T 3883.2-2012 "Safety of hand-held power tools - Part 2. Dedicated to screwdrivers and impact wrenches
Requirements, compared with GB/T 3883.2-2012, the main technical changes are as follows.
--- Increase the scope of application does not apply (see Chapter 1);
---Modify the definition of screwdriver and impact wrench (see Chapter 3, Chapter 3 of the.2012 edition);
--- Instructions for increasing the quality of the tool in the general conditions of the test (see Chapter 5);
--- Signs and instructions increased by 8.14.1.111) (see Chapter 8);
--- Abnormal operation modification Table 4 corresponding to Part 1 (see Chapter 18, Chapter 18 of the.2012 edition);
--- The mechanical hazard has been modified from the contents of 19.6 (see 19.6, Chapter 19 of the.2012 edition);
--- Mechanical strength modification 20.5 not applicable range (see Chapter 20, Chapter 20 of the.2012 edition);
--- Structure 21.32 moved to 21.30, and related modifications (see Chapter 21, Chapter 21 of the.2012 edition);
---Component removal 23.3 (see Chapter 23, Chapter 23 of the.2012 edition);
--- Increase the informative Appendix I "Measurement of noise and vibration" (see Appendix I);
--- Increase K.8.14.1.1101) (see Appendix K).
This section uses the translation method equivalent to IEC 62841-2-2.2014 "Motor-driven hand-held, portable power tools and garden machines
Safety of equipment - Part 2-2. Particular requirements for hand-held screwdrivers and impact wrenches.
This section has made the following editorial changes.
--- Change the standard name to "Safety of hand-held, portable power tools and garden tools - Part 202. Hand-held screwdrivers
And special requirements for impact wrenches";
--- This section incorporates the contents of IEC 62841-2-2.2014/COR1.2015, the terms of which are related to these technical errata
The vertical double line (‖) in the outer margin of the margin is marked.
This part should be in accordance with GB/T 3883.1-2014 "Safety of hand-held, portable power tools and garden tools - Part 1. General
Seek to use together.
This section states the “applicable” part, indicating that the corresponding clauses in GB/T 3883.1-2014 apply; this section states the “replacement” part.
The terms in this section shall prevail; the part of this section that states “modifications” shall be related to the corresponding provisions of GB/T 3883.1-2014.
The content shall be subject to the revised content of this section, and the other contents of the clause shall still apply; the part of this section indicating “increase” means
In addition to the corresponding provisions of GB/T 3883.1-2014, it should also comply with the provisions added in this section.
This part was proposed by China Electrical Equipment Industry Association.
This part is under the jurisdiction of the National Power Tools Standardization Technical Committee (SAC/TC68).
This section was drafted. Shandong Zhongxing Power Tools Co., Ltd., Shanghai Electric Tools Research Institute (Group) Co., Ltd., Zhejiang Yate Electric
Instrument Co., Ltd., Jiangsu Dongcheng Power Tools Co., Ltd., Ruiqi Holdings Co., Ltd.
The main drafters of this section. Yang Lichun, Pan Shunfang, Ding Junfeng, Shi Chunlei, Zhu Xianbo, Cao Zhenhua, Chen Qin, Yuan Guisheng, Yin Haixia.
The previous versions of the standards replaced by this section are.
---GB 3883.2-1985, GB 3883.2-1991, GB 3883.2-2005, GB/T 3883.2-2012.
Introduction
In.2014, China issued the national standard GB/T 3883.1-2014 "Handheld, portable power tools and garden tools safety
Part 1. General Requirements, the original GB/T 3883 (handheld power tool part), GB/T 13960 (portable power tool part) and
GB/T 4706 (only for garden power tools) is integrated with the common technical requirements of the general safety standards for the three series of power tools.
The specific requirements for the specific types of small products used in conjunction with GB/T 3883.1-2014 are 3 parts, respectively, part 2 (hand
The part of the holding power tool), the third part (portable power tool part), the fourth part (the part of the garden power tool) are all converted to the corresponding country.
Special requirements for the standard IEC 62841 series.
The main elements of the standard name are expanded to “safe for hand-held, portable power tools and garden tools”, using the original hand-held power tools
Part of the standard number GB/T 3883. The standard part number of each part of the small product is composed of 3 digits, of which the first digit
Indicates the corresponding part, and the 2nd and 3rd digits represent different subcategories.
The new GB/T 3883 series standard will form a safe, complete, universal, unified safety tool series for power tools.
The system makes the implementation of the standard more practical and easy to use.
At present, the new GB/T 3883 series standard "Handheld Power Tools Part" has been released as follows.
---GB/T 3883.201-2017 Safety of hand-held, portable power tools and garden tools - Part 2. Drills and impact
Special requirements for electric drills (instead of GB/T 3883.6-2012);
Special requirements for wire cutters and impact wrenches (instead of GB/T 3883.2-2012);
--- GB/T 3883.204-2019 Safety of hand-held, portable power tools and garden tools - Part 204. Hand-held
Special requirements for disc sanders and polishing machines (instead of GB/T 3883.4-2012);
--- GB/T 3883.205-2019 Safety of hand-held, portable power tools and garden tools - Part 205. Hand-held
Special requirements for saws (instead of GB/T 3883.5-2007);
--- GB/T 3883.210-2019 Safety of hand-held, portable power tools and garden tools - Part 210. Hand-held
Special requirements for planing (instead of GB/T 3883.10-2007).
The following standards will be revised in the future.
---GB/T 3883.3-2007 Safety of hand-held power tools - Part 2. Specializations for grinders, polishing machines and disc sanders
Use requirements;
--- GB/T 3883.7-2012 Safety of hand-held power tools - Part 2. Particular requirements for hammers;
--- GB/T 3883.8-2012 Safety of hand-held power tools - Part 2. Particular requirements for electric scissors and electric punches;
--- GB/T 3883.9-2012 Safety of hand-held power tools - Part 2. Particular requirements for tapping machines;
-- Safety of hand-held power tools - Part 2. Particular requirements for reciprocating saws (Jigsaws, blade saws);
Safety of hand-held power tools - Part 2. Particular requirements for concrete vibrators;
--- GB/T 3883.13-1992 Safety of hand-held power tools - Part 2. Particular requirements for non-flammable liquid electric spray guns;
---GB/T 3883.16-2008 Safety of hand-held power tools - Part 2. Particular requirements for nailing machines;
Safety of hand-held power tools - Part 2. Particular requirements for wood milling and trimming machines;
---GB/T 3883.18-2009 Safety of hand-held power tools - Part 2. Particular requirements for stone cutting machines
--- GB/T 3883.19-2012 Safety of hand-held power tools - Part 2. Particular requirements for dredging machines;
--- GB/T 3883.20-2012 Safety of hand-held power tools - Part 2. Particular requirements for strapping machines;
--- GB/T 3883.21-2012 Safety of hand-held power tools - Part 2. Particular requirements for band saws;
---GB/T 3883.22-2008 Safety of hand-held power tools - Part 2. Particular requirements for slotting machines.
Safety of hand-held, portable power tools and garden tools
Part 202. Hand-held screwdrivers and impact wrenches
Special requirements
1 Scope
This chapter of GB/T 3883.1-2014 is applicable except as provided below.
increase.
This section applies to screwdrivers and impact wrenches.
This section does not apply to drills that can be installed with screwdriver bits for screwing.
2 Normative references
This chapter of GB/T 3883.1-2014 is applicable except as provided below.
increase.
GB/T 26548.2-2011 - Test methods for vibration of portable portable power tools - Part 2. s.
Wire cutter (ISO 28927-2.2009, IDT)
3 Terms and definitions
This chapter of GB/T 3883.1-2014 is applicable except as provided below.
increase.
3.101
Screwdriver screwdriver
Non-circular clamping device with hexagon or square for tightening and loosening screws, nuts and other similar parts without impact mechanism
Tool, but can be equipped with a device that sets the depth, torque or can be rotated.
3.102
Impact wrench impactwrench
Non-circular clamping device with hexagonal or square shape for tightening and loosening screws, nuts, etc.
Institutional tools.
Note. Some impact wrenches are equipped with a set depth and can be equipped with a set torque or a disconnected rotation.
4 General requirements
This chapter of GB/T 3883.1-2014 is applicable.
5 test general conditions
This chapter of GB/T 3883.1-2014 is applicable except as provided below.
5.17 increase.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 3883.202-2019_English be delivered?Answer: Upon your order, we will start to translate GB/T 3883.202-2019_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 3883.202-2019_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 3883.202-2019_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|