|
Std ID |
Description (Standard Title) |
|
GB/T 17213.8-2015
|
Industrial-process control valves -- Part 8-1: Noise considerations -- Laboratory measurement of noise generated by aerodynamic flow through control valves
|
|
GB/T 17213.10-2015
|
Industrial-process control valves -- Part 2-4: Flow capacity -- Inherent flow characteristics and rangeability
|
|
GB/T 17213.1-2015
|
Industrial-process control valves -- Part 1: Control valve terminology and general considerations
|
|
GB/T 17614.3-2013
|
Transmitters for use in industrial-process control systems -- Part 3: Methods for performance evaluation of intelligent transmitters
|
|
GB/T 29816-2013
|
Valve positioner based on HART protocol general specification
|
|
GB/T 26155.2-2012
|
Intelligent electrical actuators for industrial-process measurement and control systems -- Part 2: Methods of evaluating the performance
|
|
GB/T 17213.17-2010
|
Industrial-process control valves -- Part 2-5: Flow capacity -- Sizing equations for fluid flow through multistage control valves with inter-stage recovery
|
|
GB/T 26155.1-2010
|
Intelligent electrical actuators for industrial-process measurement and control systems -- Part 1: General specification
|
|
GB/T 4213-2008
|
Pneumatic Industrial Process Control Valves
|
|
GB/T 17213.5-2008
|
Industrial-process control valves -- Part 5: Marking
|
|
GB/T 17213.10-2005
|
Industrial-process control valves -- Part 2-4: Flow capacity -- Inherent flow characteristics and rangeability
|
|
GB/T 17213.11-2005
|
Industrial-process control valves -- Part 3-2: Dimensions -- Face to face dimensions for rotary control valves except butterfly valves
|
|
GB/T 17213.12-2005
|
Industrial-process control valves -- Part 3-3: Dimensions -- End dimensions for buttweld, two-way, globe-type, straight pattern control valves
|
|
GB/T 17213.13-2005
|
Industrial-process control valves -- Part 6-2: Mounting details for attachment of positioners to valves -- Positioner mounting on rotary actuators
|
|
GB/T 17213.14-2005
|
Industrial-process control valves -- Part 8-2: Noise considerations -- Laboratory of noise generated by hydrodynamic flow through control valves
|
|
GB/T 17213.15-2005
|
Industrial-process control valves -- Part 8-3: Noise considerations -- Control valves aerodynamic noise prediction method
|
|
GB/T 17213.16-2005
|
Industrial-process control valves -- Part 8-4: Noise considerations -- Prediction of noise generated by hydrodynamic flow
|
|
GB/T 17213.2-2005
|
Industrial-process control valves -- Part 2-1: Flow capacity -- Sizing equations for fluid flow under installed conditions
|
|
GB/T 17213.3-2005
|
Industrial-process control valves -- Part 3-1: Dimensions -- Face-to-face dimensions for flanged, two-way, globe-type, straight pattern and center-to-face dimensions for flanged, two-way, globe-type, angle pattern control valves
|
|
GB/T 17213.4-2005
|
Industrial-process control valves -- Part 4: Inspection and routine testing
|
|
GB/T 17213.6-2005
|
Industrial-process control valves -- Part 6-1: Mounting details for attachment of positioners to control valves -- Positioner mounting on linear actuators
|
|
GB/T 17213.9-2005
|
Industrial-process control valves -- Part 2-3: Flow capacity -- Test procedures
|
|
GB/T 17213.1-1998
|
Industrial-process control valves. Part 1: Control valve terminology and general considerations
|
|
GB/T 17213.5-1998
|
Industrial-process control valves. Part 5: Marking
|
|
GB/T 17213.7-1998
|
Industrial-process control valves. Part 7: Control valve data sheet
|
|
GB/T 17213.8-1998
|
Industrial-process control valves. Part 8: Noise considerations. Section 1: Laboratory measurement of noise generated by aerodynamic flow through control valves
|
|
GB/T 4213-1992
|
Pneumatic industrial process control valves
|
|
GB/T 40214-2021
|
Document kinds for electrical and instrumentation projects in the process industry
|
|
GB/T 30241.1-2013
|
Zener diode safety barrier -- Part 1: General technical specification
|
|
GB/T 30241.2-2013
|
Zener diode safety barrier -- Part 2: Methods of evaluating the performance
|
|
GB/T 28471.1-2012
|
Safety barrier for use in industrial-process measure and control systems -- Part 1: General technical specification
|
|
GB/T 28471.2-2012
|
Safety barrier for use in industrial-process measure and control systems -- Part 2: Methods of evaluating the performance
|
|
GB/T 28472.1-2012
|
Distributor for use in industrial-process measure and control systems -- Part 1: General technical specification
|
|
GB/T 28472.2-2012
|
Distributor for use in industrial-process measure and control systems -- Part 2: Methods of evaluating the performance
|
|
GB/T 17614.1-2008
|
Industrial process control systems with transmitter -- Part 1: Methods for performance evaluation
|
|
GB/T 17614.1-1998
|
Transmitters for use in industrial-process control systems. Part 1: Methods of evaluating the performance
|
|
GB/T 17614.2-1998
|
Transmitters for use in industrial-process control systems. Part 2: Guidance for inspection and routine testing
|
|
GB/T 14059-1993
|
DDZ-III series process electronic control system. Gurrent converter
|
|
GB/T 14060-1993
|
DDZ-III series process electronic control system Impedance converter
|
|
GB/T 14061-1993
|
DDZ-III series process electronic control system Recording instrument
|
|
GB/T 14063-1993
|
DDZ-III series process electronic control system. Ratio setter
|
|
GB/T 14065-1993
|
DDZ-III series process electronic control system Safety barrier
|
|
GB/T 14066-1993
|
DDZ-III series process electronic control system. Signal selector
|
|
GB/T 14067-1993
|
DDZ-III series process electronic control system. Signal limiter
|
|
GB/T 14068-1993
|
DDZ-III series process electronic control system Q antomatic/manual station
|
|
GB/T 14069-1993
|
DDZ-III series process electronic control system Stabilizey voltage supply box
|
|
GB/T 13635-1992
|
DDZ-IIIseries process electronic control system--Frequency converter
|
|
GB/T 13636-1992
|
DDZ-IIIseries process electronic control system--Constant current settes
|
|
GB/T 13637-1992
|
DDZ-IIIseries process electronic control system--Ladicating instrument
|
|
GB/T 2612-1989
|
DDZ-2 Series process electronic control system--Operating signal
|
|
GB/T 2613-1989
|
DDZ-IIISeries process electronic control system--Operating signal
|
|
GB/T 11005.1-1989
|
DDZ-3 series process electronic control system--Computing unit
|
|
GB/T 11005.2-1989
|
DDZ-3 series process electronic control system--Controller
|
|
GB/T 11005.3-1989
|
DDZ-3 series process electronic control system--Distributor
|
|
GB/T 35585-2017
|
Furnace temperature track logger
|
|
GB/T 35145-2017
|
Cold chain temperature logger
|
|
GB/T 25479-2010
|
Paperless recorder for use in industrial-process measurement and control systems
|
|
GB/T 13639-2008
|
Digital indicators with analogue input for use in industrial-process measurement and control systems
|
|
GB/T 9249-2008
|
Self-balance recorders and indicators for use in industrial-process measurement and control systems
|
|
GB/T 3386.1-2007
|
Electrical and pneumatic analogue chart recorders for use in industrial-process control systems -- Part 1: Methods for performance evaluation
|
|
GB/T 3386.2-2007
|
Electrical and pneumatic analogue chart recorders for use in industrial-process control systems -- Part 2: Guidance for inspection and routine testing
|
|
GB/T 14062-1993
|
DDZ-III series process electronic control system. Integrating instrument
|
|
GB/T 13639-1992
|
Digital indicators with analogue input for use in industrial-process measurement and control systems
|
|
GB/T 46398-2025
|
Loss in weight feeder
|
|
GB/T 4167-2024
|
Weights
|
|
GB/T 15561-2024
|
Digital indication rail-weighbridges
|
|
GB/T 7724-2023
|
Electronic weighing indicator
|
|
GB/T 9081-2023
|
Fuel dispensers for motor vehicles
|
|
GB/T 21296.6-2022
|
Automatic instruments for weighing road vehicles in motion - Part 6: Plate modular
|
|
GB/T 21296.1-2020
|
Automatic instruments for weighing road vehicles in motion - Part 1: General technical specification
|
|
GB/T 21296.2-2020
|
Automatic instruments for weighing road vehicles in motion - Part 2: Weighing whole loads
|
|
GB/T 21296.3-2020
|
Automatic instruments for weighing road vehicles in motion - Part 3: Weighing axle loads
|
|
GB/T 21296.4-2020
|
Automatic instruments for weighing road vehicles in motion - Part 4: Bending plate type
|
|
GB/T 21296.5-2020
|
Automatic instruments for weighing road vehicles in motion - Part 5: Crystal quartz type
|
|
GB/T 7722-2020
|
(Electronic Bench Scale)
|
|
GB/T 11883-2017
|
General technical specification for electronic crane and hanging scale
|
|
GB/T 34850-2017
|
Weighing instruments for mining car in motion
|
|
GB/T 7723-2017
|
Fixed location electronic weighing instrument
|
|
GB/T 35593-2017
|
Chute weighing instruments
|
|
GB/T 35449-2017
|
Automatic quantitative loading vehicle system
|
|
GB/T 7721-2017
|
Continuous totalizing automatic weighing instruments (belt weigher)
|
|
GB/T 11885-2015
|
Automatic rail-weighbridges
|
|
GB/T 31704-2015
|
Automatic loader weighing instruments
|
|
GB/T 31890-2015
|
Electronic screw weigher
|
|
GB/T 29580-2013
|
Time-based cost-allocation device for central air-conditioning
|
|
GB/T 30105-2013
|
Supermassive continuous rail static weighing device without foundation
|
|
GB/T 30242-2013
|
General specification for magnetoelectric velocity transducer
|
|
GB/T 26389-2011
|
Method of classified type of weighing instrument products
|
|
GB/T 27739-2011
|
Automatic catch weighing instruments
|
|
GB/T 28013-2011
|
Discontinuous totalizing automatic weighing instruments
|
|
GB/T 28017-2011
|
Pressure mode weighing coal feeder
|
|
GB/T 4167-2011
|
Weights
|
|
GB/T 11884-2008
|
Spring dial scale
|
|
GB/T 14250-2008
|
Terminology of weighing instruments
|
|
GB/T 15561-2008
|
Electronic static rail weighbridge
|
|
GB/T 23111-2008
|
Non-automatic weighing instrument
|
|
GB/T 7551-2008
|
Load cells
|
|
GB/T 7723-2008
|
Fixed location electronic instrument
|
|
GB/T 7724-2008
|
Electronic weighing meter
|
|
GB/T 21296-2007
|
Automatic instruments for weighting road vehicles in motion
|