|
US$399.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 30242-2013: General specification for magnetoelectric velocity transducer
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 30242-2013 | English | 399 |
Add to Cart
|
3 days [Need to translate]
|
General specification for magnetoelectric velocity transducer
| Valid |
GB/T 30242-2013
|
PDF similar to GB/T 30242-2013
Basic data | Standard ID | GB/T 30242-2013 (GB/T30242-2013) | | Description (Translated English) | General specification for magnetoelectric velocity transducer | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | N13 | | Classification of International Standard | 17.080 | | Word Count Estimation | 17,126 | | Quoted Standard | GB/T 191-2008; GB/T 2423.1-2008; GB/T 2423.2-2008; GB/T 2423.3-2006; GB/T 2423.5-1995; GB/T 2423.10-2008; GB/T 2423.17-2008; GB/T 2423.22-2012; GB/T 2829-2002; GB/T 7666-2005; GB/T 13384-2008 | | Regulation (derived from) | National Standards Bulletin 2013 No. 27 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the magnetic velocity sensor classification and model name, requirements, test methods, inspection rules, packaging and storage. This standard applies to the use of electromagnetic induction principle amount will be converted to an | GB/T 30242-2013: General specification for magnetoelectric velocity transducer---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
General specification for magnetoelectric velocity transducer
ICS 17.080
N13
National Standards of People's Republic of China
Magnetic velocity sensor General technical requirements
Issued on. 2013-12-31
2014-07-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Introduction Ⅲ
1 Scope 1
2 Normative references 1
3 Categories 1 and type designation
3.1 Category 1
3.2 Type designation 1
4 Requirements 1
4.1 General 1
4.2 Scope of the technical requirements of 2
4.3 Operating Conditions 2
4.4 Technical Requirements 3
4.4.1 Appearance 3
4.4.2 mark 3
4.4.3 Weight 3
4.4.4 Outline and installation size 3
4.4.5 output resistance 3
4.4.6 Insulation Resistance 3
4.4.7 Insulation strength 3
4.4.8 Reference sensitivity (when applicable) 3
4.4.9 Frequency response (when applicable) 3
(If applicable) 4.4.10 amplitude linearity 3
4.4.11 transverse sensitivity ratio (when applicable) 3
(If applicable) 4.4.12 frequency response range 4
4.4.13 output signal frequency (if applicable) 4
4.4.14 output signal to noise ratio (where applicable) 4
4.4.15 sensitivity drift over time (if applicable) 4
4.4.16 output signal frequency drift over time (if applicable) 4
4.4.17 thermal sensitivity drift (when applicable) 4
4.4.18 heat output signal frequency drift (when applicable) 4
4.4.19 temperature storage 4
4.4.20 cold storage 4
4.4.21 temperature change 4
4.4.22 Vibration 5
4.4.23 Impact 5
4.4.24 Damp heat 5
4.4.25 Salt spray 5
Test Method 5 5
5.1 Test conditions 5
5.1.1 test environment condition 5
5.1.2 Arbitration environmental conditions 5
5.2 Test System 6
General provisions 5.3 Test 6
5.3.1 Installation and connection 6
5.3.2 Place and preheat 6
5.4 Test 6
5.4.1 Exterior 6
5.4.2 mark 6
5.4.3 Weight 6
5.4.4 Outline and installation size 6
5.4.5 Output Resistance 6
5.4.6 Insulation resistance 6
5.4.7 Dielectric Strength 6
5.4.8 Reference sensitivity 7
5.4.9 Frequency response 7
5.4.10 amplitude linearity 7
5.4.11 transverse sensitivity than 8
5.4.12 Frequency response 8
5.4.13 output signal frequency 8
5.4.14 output signal to noise ratio 8
5.4.15 sensitivity drift over time 8
5.4.16 output signal frequency drift over time 9
5.4.17 thermal sensitivity drift 9
5.4.18 output signal frequency thermal drift 9
5.4.19 temperature storage 10
5.4.20 cold storage 10
5.4.21 temperature change 10
5.4.22 Vibration 10
5.4.23 Impact 10
5.4.24 Damp heat 10
5.4.25 Salt spray 10
10 6 Inspection Rules
6.1 Inspection classification 10
6.2 factory inspection 11
12 6.3 Type inspection
6.3.1 Test principle 12
6.3.2 Sampling plan and decision rules 12
7 Packaging and storage 12
7.1 Packaging 12
7.2 Storage 12
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
Please note that some of the content of this document may involve patents. Release mechanism of the present document does not assume responsibility for the identification of these patents.
This standard is proposed and managed by China Machinery Industry Federation.
This standard was drafted. National Instruments Component Quality Supervision and Inspection Center, Shenyang Academy of Instrumentation Science, Hengyang Heng electrical instrument has
Ltd., China Electronics Technology Group Corporation 29th Institute, Department of Shenyang Booz Bin Nisi Sensing Technology Co., Ltd., Industrial machinery equipment
Instrumentation Technology and Economy Institute.
The main drafters of this standard. Li Yanfu, Xuqiu Ling, Liu Diandong, YU Zhen Yi, Wu Hong, Liu Xiangheng, Fan Shuxin, Sun Rentao, Jin Lihui.
Magnetic velocity sensor General technical requirements
1 Scope
This standard specifies the magnetic speed sensor classification and type designation, requirements, test methods, inspection rules, packaging and storage.
This standard applies to the use of electromagnetic induction principle amount of speed into an electrical signal output of magnetic speed sensor (hereinafter referred to as the sensor
Device).
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 191-2008 Packaging - Pictorial signs
GB/T 2423.1-2008 Environmental testing for electric and electronic products Part 2. Test methods Test A. Cold
GB/T 2423.2-2008 Environmental testing for electric and electronic products Part 2. Test methods Test B. Dry heat
GB/T 2423.3-2006 Environmental testing for electric and electronic products Part 2. Test methods - Test Cab. Damp heat test
GB/T 2423.5-1995 Environmental testing for electric and electronic products Part 2. Test methods Test Ea and guidance. Shock
GB/T 2423.10-2008 Environmental testing for electric and electronic products Part 2. Test methods Test Fc. Vibration (sinusoidal)
GB/T 2423.17-2008 Environmental testing for electric and electronic products Part 2. Test methods - Test Ka. Salt
GB/T 2423.22-2012 Environmental testing - Part 2. Test methods - Test N. Temperature change
GB/T 2829-2002 periodic inspection Sampling procedures and tables (suitable for process stability test)
GB/T 7666-2005 and sensor nomenclature codes
GB/T 13384-2008 mechanical and electrical products packaging General technical conditions
3 Classification and model name
3.1 Classification
Magnetic velocity sensor according to the sensed speed types are divided into the amount of magnetic type rotational speed sensor (hereinafter referred to as speed sensor) and magnetic
Electric vibration velocity sensor (hereinafter referred to as vibration velocity sensors).
3.2 Type designation
Sensor model naming should be consistent with the provisions of GB/T 7666-2005 of.
4 Requirements
4.1 General
Shall comply with the technical requirements of the sensor requirements of this standard, a detailed specification of the requirements should not fall below this standard. When the requirements of this standard and detailed
When fine specification requirements inconsistent detail specification shall prevail.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 30242-2013_English be delivered?Answer: Upon your order, we will start to translate GB/T 30242-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 30242-2013_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 30242-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|