|
US$194.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 17213.10-2015: Industrial-process control valves -- Part 2-4: Flow capacity -- Inherent flow characteristics and rangeability
Status: Valid GB/T 17213.10: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 17213.10-2015 | English | 194 |
Add to Cart
|
3 days [Need to translate]
|
Industrial-process control valves -- Part 2-4: Flow capacity -- Inherent flow characteristics and rangeability
| Valid |
GB/T 17213.10-2015
|
| GB/T 17213.10-2005 | English | 359 |
Add to Cart
|
3 days [Need to translate]
|
Industrial-process control valves -- Part 2-4: Flow capacity -- Inherent flow characteristics and rangeability
| Obsolete |
GB/T 17213.10-2005
|
PDF similar to GB/T 17213.10-2015
Basic data | Standard ID | GB/T 17213.10-2015 (GB/T17213.10-2015) | | Description (Translated English) | Industrial-process control valves -- Part 2-4: Flow capacity -- Inherent flow characteristics and rangeability | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | N16 | | Classification of International Standard | 23.060.40; 25.040.40 | | Word Count Estimation | 10,120 | | Date of Issue | 2015-12-10 | | Date of Implementation | 2016-07-01 | | Older Standard (superseded by this standard) | GB/T 17213.10-2005 | | Quoted Standard | GB/T 17213.1-2015; GB/T 17213.9-2005 | | Adopted Standard | IEC 60534-2-4-2009, IDT | | Regulation (derived from) | National Standard Announcement 2015 No.38 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the typical control valve inherent flow characteristics and description of methods inherent adjustable ratio, but also provides for the development of guidelines to comply with the manufacturer to determine the flow characteristics of the method. This standard applies to all types of industrial process control valves. | GB/T 17213.10-2015: Industrial-process control valves -- Part 2-4: Flow capacity -- Inherent flow characteristics and rangeability
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
(Industrial process control valves - Part 2-4. Flow capacity - Inherent flow characteristics and rangeability)
ICS 23.060.40; 25.040.40
N16
National Standards of People's Republic of China
Replacing GB/T 17213.10-2005
Industrial process control valves
Part 2-4. Flow capacity
Inherent flow characteristics and rangeability
Part 2-4. Flowcapacity-Inherentflowcharacteristicsandrangeability
(IEC 60534-2-4.2009, IDT)
Issued on. 2015-12-10
2016-07-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
GB/T 17213 "Industrial process control valves" is divided into the following sections.
--- Part 1. Control valve terminology and general provisions (GB/T 17213.1);
--- Part 2-1. Flow capacity installed computing equations for fluid flow under conditions (GB/T 17213.2);
--- Part 2-3. Flow capacity - Test procedures (GB/T 17213.9);
--- Part 2-4. Flow capacity - Inherent flow characteristics and rangeability (GB/T 17213.10);
--- Part 2-5. Flow capacity between the fluid flowing through the recovery stage formula multi-level control valve (GB/T 17213.17);
--- Part 3-1. Dimensions two straight ball through the control valve from the flange face and two-way ball valve angle control center of the flange to the flange
End face of the spacing (GB/T 17213.3);
--- Part 3-2. Dimensions rotary control valve end face (except butterfly) distance (GB/T 17213.11);
--- Part 3-3. Dimensions butt-type two-pass straight ball valve from the control terminal (GB/T 17213.12);
--- Part 4. Inspection and routine testing (GB/T 17213.4);
--- Part 5. Flag (GB/T 17213.5);
--- Part 6-1. positioners and control valve actuator connected to the installation details of the positioner mounted on linear actuators of
(GB/T 17213.6);
--- Part 6-2. positioners and control valve actuator connected to the installation details of the positioner mounted on rotary actuators
(GB/T 17213.13);
--- Part 7. Control valve data sheets (GB/T 17213.7);
--- Part 8-1. Noise considerations - Laboratory measurement within the aerodynamic flow through control valve noise generated (GB/T 17213.8);
--- Part 8-2. Noise considerations - Laboratory measurement within the hydrodynamic flow through control valve noise generated (GB/T 17213.14);
--- Part 8-3. Noise prediction method (GB/T 17213.15) aerodynamic flow through control valve generated noise considerations;
--- Part 8-4. Noise considerations hydrodynamic flow through control valve generated noise prediction method (GB/T 17213.16);
--- Part 9. Test procedure step input response measurement (GB/T 17213.18).
This section GB/T 17213 Part 2-4.
This section drafted in accordance with GB/T 1.1-2009 given rules.
This Part replaces GB/T 17213.10-2005 "Industrial process control valves - Part 2-4. Flow capacity inherent flow characteristics and
Transfer ratio. " Compared with GB/T 17213.10-2005, the main technical changes are as follows.
--- Modify the scope of application (see Chapter 1, GB/T 17213.10-2005 Chapter 1);
--- Update the normative references;
--- Deleted the term "flow coefficient" content on Av (see 3.1, GB/T 17213.10-2005 3.1);
--- Added "Φ0" description (see 3.3);
--- Increasing the term "nominal slope" (see 3.7);
--- Fixed term "nominal slope" original text incorrect formula, log should be ln (see GB/T 17213.1 4.9.2);
--- Added "symbol" section (see Chapter 4);
--- Added "Manufacturers should n, m and make provision for value Φ0" requirement (see Chapter 5);
--- Added "Manufacturers can also put forward in addition to the stroke position of the outer flow coefficient," the description (see Chapter 5);
--- Added "inherent adjustable ratio" section (see Chapter 6);
--- Delete the original standard in Figures 1, 2 and 3 (see GB/T 17213.10-2005 Figure 1, Figure 2, Figure 3);
--- Added Figure 1, Figure 2.
This section uses the translation method identical with IEC 60534-2-4.2009 "Industrial process control valves - Part 2-4. Flow capacity inherent
Flow characteristics and rangeability. "
Correspondence between the consistency of the standards of international documents and normative references of the following documents.
GB/T 17213.9-2005 Industrial process control valves - Part 2-3. Flow capacity - Test procedures (IEC 60534-2-3.
1997, IDT)
This part is proposed by China Machinery Industry Federation.
This part of the country's industrial process control and automation Standardization Technical Committee (SAC/TC124) centralized measurement.
This section is responsible for drafting unit. Shanghai Institute of Industrial Automation Instrumentation.
Participated in the drafting of this section (in alphabetical order). Emerson Process Management (Tianjin) Valve Co., Ltd., Sichuan-Chongqing adjustment
Valve Co., Ltd., Chongqing Shi Zhuang Instrument Co., Ltd., Fuyang South Valve Co., Ltd., Hangzhou Valve Co., Ltd., Shanghai valve special stream
Body Control Valve Co., Ltd., Shanghai Automation Instrumentation Shares Automation Instrumentation seven plants, Tianjin proficient control Instrumentation Technology Co. Ltd., Wuxi Intelligent Automation
Engineering Co., Wuzhong Instrument Co., Ltd., Zhejiang Australia Cheung Automation Technology Co., Ltd., Zhejiang send Waugh Automation Instrumentation Co.,
Zhejiang tripartite control valve Co., Ltd., Zhejiang Yongsheng Instrumentation Co., Ltd. Zhejiang Sino-German-controlled valves.
The main drafters of this section. Wang Jiong, Li Minghua, Shen Wei, Shen Jian-standard, high-strength, Lin Feng, Liao Jianmin, Zhang Shishu, Zhangde Xian, Fan Ping, Cai plus tide,
Yang Jianwen, He Wenguang, Hank Wang, Ma Yushan, the soldiers left, Zhang Yongliang, whose exhibition Li, Cai Dongwu, Barron Ming Xuchun Liang, Chen Yan, Meng little new, Chen Dajun,
Cai Kejian, Tang Jin Jiang, Li.
This section was first released in September 2005, this is the first revision.
Industrial process control valves
Part 2-4. Flow capacity
Inherent flow characteristics and rangeability
1 Scope
GB/T 17213 provisions of this part of the typical control valve inherent flow characteristics and description of methods inherent adjustable ratio, but also the provisions
The formulation of guidelines to comply flow characteristics determined by the manufacturer of the method.
This section applies to all types of industrial process control valves.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 17213.1-2015 Industrial process control valves - Part 1. Control valve terminology and general principles (IEC 60534-1.2005, IDT)
IEC 60534-2-3 Industrial process control valves - Part 2-3. Flow capacity - Test procedures (Industrial-processcontrol
valves-Part 2-3. Flowcapacity-Testprocedures)
3 Terms and Definitions
Terms and Definitions The following terms and definitions GB/T 17213.1-2015 defined apply to this document.
3.1
Flow coefficient flowcoefficient
(See GB/T 17213.1-2015, defined 4.6)
3.2
Rated flow coefficient ratedflowcoefficient
(See GB/T 17213.1-2015, the definition 4.6.3)
3.3
The relative flow coefficient (Φ) relativeflowcoefficient (Φ)
Φ0 is the relative stroke of the relative flow coefficient of 0%.
[See GB/T 17213.1-2015, the definition 4.6.4]
3.4
Travel itinerary
(See GB/T 17213.1-2015, the definition 4.5.2)
3.5
Rated travel ratedtravel
(See GB/T 17213.1-2015, the definition 4.5.3)
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 17213.10-2015_English be delivered?Answer: Upon your order, we will start to translate GB/T 17213.10-2015_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 17213.10-2015_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 17213.10-2015_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 17213.10-2015?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 17213.10-2015 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|