|
US$1319.00 · In stock
Delivery: <= 8 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 28013-2011: Discontinuous totalizing automatic weighing instruments
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 28013-2011 | English | 1319 |
Add to Cart
|
8 days [Need to translate]
|
Discontinuous totalizing automatic weighing instruments
| Valid |
GB/T 28013-2011
|
PDF similar to GB/T 28013-2011
Basic data | Standard ID | GB/T 28013-2011 (GB/T28013-2011) | | Description (Translated English) | Discontinuous totalizing automatic weighing instruments | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | N13 | | Classification of International Standard | 17.100 | | Word Count Estimation | 60,639 | | Date of Issue | 2011-10-31 | | Date of Implementation | 2012-02-01 | | Quoted Standard | GB/T 191; GB/T 2423.1; GB/T 2423.2; GB/T 2423.3; GB/T 2424.1; GB/T 2424.2; GB/T 2887; GB/T 7551; GB/T 7724; GB/T 8923; GB/T 13384; GB 14249.1; GB/T 14250; GB/T 15395; GB/T 17214.2; GB/T 17626.1; GB/T 17626.2; GB/T 17626.3; GB/T 17626.4; GB/T 17626.5; GB/T 17626.6; GB/T 17626.11; GB/T 18039.5; GB/T 21437.2-2008; QB 1563; QB/T 1588.1; QB/T 1588.2; QB/T 1588.3; QB/T 1588.4; OIML R76; ISO 7637-3 -2007; ISO 16750-2 | | Adopted Standard | OIML R107-1-2007, MOD | | Regulation (derived from) | Announcement of Newly Approved National Standards No. 15 of 2011 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the discontinuous totalizing automatic weighing instruments (cumulative hopper scales, hereinafter referred to as scales) requirements, test methods, type evaluation, factory inspection, labeling, packaging, transportation and storage. This standard applies to having a hopper -type carrier, through the bulk material is divided into a number of separate load, followed by weighing the mass of each separate load, the cumulative weighing results and unloading of weighing load separation. This standard does not apply to the following types of scales: "Dynamic Weighing " type scales, through preset constant load weighing the quality and the product of the number of cycles performed for cumulative weighing bulk materials. | GB/T 28013-2011: Discontinuous totalizing automatic weighing instruments---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Discontinuous totalizing automatic weighing instruments
ICS 17.100
N13
National Standards of People's Republic of China
Discontinuous totalizing automatic weighing instruments
(OIMLR107-1.2007, MOD)
Issued on. 2011-10-31
2012-02-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Introduction Ⅲ
1 Scope 1
2 Normative references 1
3 Terms and definitions 2
3.1 General definitions 2
3 3.2 Structure
3.3 Metrological characteristics 6
3.4 Indication and Error 7
3.5 Effect of the amount and reference conditions 9
3.6 Test 9
3.7 Abbreviations and symbols 10
4 Product Specification 10
4.1 Part 10
10 4.2 Specifications
5 requires 10
5.1 measurement requirements 10
5.2 Technical Requirements 13
5.3 electronic weighing requirements 18
6 20 Test Method
20 6.1 Static weighing test
Automatic weighing 6.2 Test 21
6.3 Inspection and testing 23
7 Type Evaluation 23
7.1 File 23
7.2 General requirements 24
7.3 module 24
7.4 Inspection Rules 25
8 25 factory inspection
8.1 Inspection Rules 25
8.2 Test item 25
9 signs, packaging, transportation and storage 26
9.1 Description Mark 26
9.2 Package Marking 27
9.3 Packaging 27
9.4 Transport 27
9.5 Storage 27
Appendix A (normative) Type evaluation test program 28
Check A.1 file 28
A.1.1 file (7.1) 28
Comparison A.1.2 construction with documentation (7.1) 28
Check A.2 Performance 28
A.3 General test requirements 28
A.3.1 Power 28
A.3.2 Zero 28
A.3.3 temperature 28
A.3.4 Recovery 28
A.3.5 preload 28
A.3.6 test standards (6.2) 29
A.4 Test program 29
A.5 Measurement Test 29
A.5.1 Material test requirements 29
A.5.2 Material Test Procedure (6.2.1, A.9) 31
A.5.3 preheating (5.3.2.5) 31
A.5.4 Zero (5.2.8) 32
A.6 Other features 33
A.6.1 balanced stability test (5.2.2.10) 33
Consistency (5.1.6) 33 A.6.2 indicating and printing devices
A.6.3 adjust automatic operation mode (5.2.2.7) 33
A.6.4 protection devices and preset controls (5.2.3) 33
A.6.5 indicates weighing results (5.2.4) 33
A.6.6 AC power supply to maintain power after the total (5.3.2.7) 34
A.6.7 DC power supply or battery voltage (5.3.2.8) 34
A.6.8 zero offset locking (5.2.8.3) 34
A.7 Influence factor and disturbance tests 34
A.7.1 Overview 34
A.7.2 Simulator requirements 34
A.7.3 Influence factor tests 35
A.7.4 interference test (5.3.1.2) 41
A.8 Span stability test (6.3.3) 49
A.9 field test step 51
A.9.1 Overview 51
A.9.2 Control instrument 51
Annex B (informative) This standard reg number and OIMLR107.2007 reg number and technical differences between the control and causes 54
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
This standard uses redrafted law revision adopts the International Organization of Legal Metrology No. 107 international recommendations OIMLR107-1.2007 "Discontinuous
The standard lists the reg number and OIMLR107-1 in Appendix B. List of 2007 write control clauses.
OIMLR107.2007 is a measurement procedure, which has been prepared and is not suitable for this part of the standard adopted. To this end, this standard
The preparation, according to GB/T 1.1-2009 "Standardization Guide Part 1. Standard structure and writing rules" and GB/T 20000.2-
2009. the relevant provisions of "Standardization Guide Part 2 rules of international standards," the following modifications.
--- To increase the content of Chapter 2, "Normative documents";
--- Increased in Chapter 4 products "Product Specification" content;
--- 5.2.9 adds "carrier" requirements;
--- 5.3.3 adds "security requirements" requirement;
--- 5.3.4 adds "load cell" requirements;
--- 5.3.5 adds "Weighing Indicator" requirements;
--- Remove OIMLR107.2007 Chapter 5, "Measurement Control" in the "initial verification", "subsequent verification", "use test" relevant
content;
--- Increased Chapter 8, "factory inspection" of the content;
--- Increased Chapter 9 "logo, packaging, transport and storage" content;
--- Deleted OIMLR107-1 "Appendix A" in A.2 "initial verification checks";
--- Add and edit content in a standard text of the provisions relating to the margin of a single vertical line identification;
--- Gives a list of these technical differences and their causes in Appendix B for reference.
Please note that some of the content of this document may involve patents. Release mechanism of the present document does not assume responsibility for the identification of these patents.
The standard proposed by China National Light Industry Council.
This standard by the National Standardization Technical Committee instrument (SAC/TC97) centralized.
This standard is drafted by. Jinan Jinzhong Electronic Scale Limited.
Participated in the drafting of this standard. Shanghai Yamato Scale Co., Ltd., Jiangsu Saimo Group Co., Mettler - Toledo (Changzhou) Weighing
Equipment System Co., Ltd., Bluestar Shenyang Institute of Light Industry Machinery Design.
The main drafters of this standard. ZHANG Zhao-xia, Xu Jian, Liuyun Bo.
Participate drafters of this standard. Chen Nikko, He Fusheng, Gedao Nan, Yin Jiangang.
Discontinuous totalizing automatic weighing instruments
1 Scope
This standard specifies the non-continuous totalizing automatic weighing instruments (cumulative hopper scales, hereinafter referred to as the instrument) requirements, test methods, evaluation type, factory
Inspection, marking, packaging, transportation and storage.
This standard applies to carrier having a hopper, divided by the number of bulk material detachment load, followed by weighing each load separation quality,
Cumulative weighing results, and the detachment load discharged scales.
This standard does not apply to the following types of instrument.
--- "Dynamic Weighing" type of instrument;
--- Preset by weighing the quality and number of cycles to be the product of a constant load of accumulated weighing bulk materials.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 191 Packaging - Pictorial signs (GB/T 191-2008, ISO 780.1997, MOD)
GB/T 2423.1 Environmental testing for electric and electronic products Part 2. Test methods Test A. Cold (GB/T 2423.1-
2008, IEC 60068-2-1.2007, IDT)
GB/T 2423.2 Environmental testing for electric and electronic products Part 2. Test methods Test B. Dry heat (GB/T 2423.2-
2008, IEC 60068-2-2.2007, IDT)
GB/T 2423.3 Environmental testing for electric and electronic products Part 2. Test methods - Test Cab. Damp heat test method
GB/T 2423.3-2006, IEC 60068-2-78.2001, IDT)
GB/T 2424.1 electric and electronic products environmental testing high temperature and low temperature tests (GB/T 2424.1-2005, IEC 60068-3-
1. 1974, IDT)
GB/T 2424.2 electric and electronic products environmental testing for damp heat tests (GB/T 2424.2-2005, IEC 60068-3-4.
2001, IDT)
GB/T 2887 computer sites generic specification
GB/T 7551 load cell
GB/T 7724 weighing display controller
GB/T 8923 steel surface before painting Rust grades and grade
GB/T 13384 mechanical and electrical products packaging General technical conditions
GB 14249.1 electronic weighing security requirements
GB/T 14250 Weighing term
GB/T 15395 General technical conditions of the electronic equipment cabinet
GB/T 17214.2 industrial process measurement and control equipment operating conditions - Part 2. Power (GB/T 17214.2-2005,
IEC 60654-2. 1979, IDT)
GB/T 17626.1 Electromagnetic compatibility Testing and measurement techniques - Overview of immunity tests (GB/T 17626.1-2006,
IEC 61000-4-1.2000, IDT)
GB/T 17626.2 Electromagnetic compatibility Testing and measurement techniques - Electrostatic discharge immunity test (GB/T 17626.2-2006,
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 28013-2011_English be delivered?Answer: Upon your order, we will start to translate GB/T 28013-2011_English as soon as possible, and keep you informed of the progress. The lead time is typically 5 ~ 8 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 28013-2011_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 28013-2011_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|