|
Std ID |
Description (Standard Title) |
Detail |
|
GB/T 24612.2-2009
|
Requirements for electrical safety in the workplace -- Part 2: Safety measure of operation on power off
|
GB/T 24612.2-2009
|
|
GB/T 24809.2-2015
|
Cranes -- Requirements for mechanisms -- Part 2: Mobile cranes
|
GB/T 24809.2-2015
|
|
GB/T 250-2008
|
Textiles -- Tests for colour fastness -- Grey scale for assessing change in colour
|
GB/T 250-2008
|
|
GB/T 25027-2010
|
Two pieces glass-lined steel vessels with agitator
|
GB/T 25027-2010
|
|
GB/T 25127.2-2010
|
Low ambient temperature air source heat pump (water chilling) packages -- Part 2: Heat pump (water chilling) packages for household and similar application
|
GB/T 25127.2-2010
|
|
GB/T 25232-2010
|
Grain and oil machinery -- Bran brush
|
GB/T 25232-2010
|
|
GB/T 25271-2010
|
Nitrocellulose coatings
|
GB/T 25271-2010
|
|
GB/T 25277-2010
|
Plastics -- Determination of phenolic antioxidants and erucamide slip additives in polypropylene homopolymer formulations -- Liquid chromatography (LC)
|
GB/T 25277-2010
|
|
GB/T 2529-2012
|
Copper sheets and bars for electrical conduction purpose
|
GB/T 2529-2012
|
|
GB/T 25389.1-2010
|
Wind turbine low-speed permanent magnet synchronous generator -- Part 1: Technical conditions
|
GB/T 25389.1-2010
|
|
GB/T 25389.2-2010
|
Wind turbine low-speed permanent magnet synchronous generator -- Part 2: Testing methods
|
GB/T 25389.2-2010
|
|
GB/T 25499-2010
|
The reuse of urban recycling water - Water quality standard for green space irrigation
|
GB/T 25499-2010
|
|
GB/T 2550-2016
|
Gas welding equipment -- Rubber hoses for welding, cutting and allied processes
|
GB/T 2550-2016
|
|
GB/T 25627-2010
|
Construction machinery -- Power-shift transmissions
|
GB/T 25627-2010
|
|
GB/T 2565-2014
|
Determination of grindability index of coal -- Hardgrove method
|
GB/T 2565-2014
|
|
GB/T 25708-2010
|
Ball mill and rod mill
|
GB/T 25708-2010
|
|
GB/T 2577-2005
|
Test method for resin content of glass fiber reinforced plastics
|
GB/T 2577-2005
|
|
GB/T 25786-2010
|
2-Amino-4-acetamino anisole
|
GB/T 25786-2010
|
|
GB/T 25808-2010
|
Sulphur black 2BR, 3B 200-percent
|
GB/T 25808-2010
|
|
GB/T 258-1977
|
Determination of acidity of gasoline, kerosene and diesel fuels
|
GB/T 258-1977
|
|
GB/T 2589-2008
|
General principles for calculation of the comprehensive energy consumption
|
GB/T 2589-2008
|
|
GB/T 25998-2010
|
Mineral wool decorating and acoustic ceilings
|
GB/T 25998-2010
|
|
GB/T 26125-2011
|
Electrical and electronic products -- Determination of six regulated substances (lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers)
|
GB/T 26125-2011
|
|
GB/T 26160-2010
|
Head-face dimensions of Chinese minors
|
GB/T 26160-2010
|
|
GB/T 26396-2011
|
Technical specification for safety of soaps and detergents
|
GB/T 26396-2011
|
|
GB/T 26568-2011
|
Magnesium sulfate for agricultural use
|
GB/T 26568-2011
|
|
GB/T 26572-2011
|
Requirements of concentration limits for certain restricted substances in electrical and electronic products
|
GB/T 26572-2011
|
|
GB/T 26604-2011
|
Classify for meat products
|
GB/T 26604-2011
|
|
GB/T 26684-2011
|
Methods of measurement for digital terrestrial set-top box
|
GB/T 26684-2011
|
|
GB/T 26685-2011
|
Methods of measurement for digital terrestrial television receiver
|
GB/T 26685-2011
|
|
GB/T 26686-2011
|
General specification for digital terrestrial television receiver
|
GB/T 26686-2011
|
|
GB/T 26714-2011
|
Ball point pens and refills [including 2015 MODIFICATION 1]
|
GB/T 26714-2011
|
|
GB/T 26900-2011
|
Bamboo charcoal for air-purification
|
GB/T 26900-2011
|
|
GB/T 26913-2011
|
Bamboo charcoal
|
GB/T 26913-2011
|
|
GB/T 2694-2010
|
Specification of manufacturing for transmission line tower
|
GB/T 2694-2010
|
|
GB/T 273.3-2015
|
Rolling bearings -- Boundary dimensions, general plan -- Part 3: Radial bearings
|
GB/T 273.3-2015
|
|
GB/T 27301-2008
|
Food safety management system -- Requirements for meat and meat product establishments
|
GB/T 27301-2008
|
|
GB/T 275-2015
|
Rolling bearings -- Fits
|
GB/T 275-2015
|
|
GB/T 27590-2011
|
Paper cup [including MODIFICATION 1]
|
GB/T 27590-2011
|
|
GB/T 27728-2011
|
Wet wipes
|
GB/T 27728-2011
|
|
GB/T 27842-2011
|
Chemicals - Test method for dynamic surface tension - Fast-bubble technique
|
GB/T 27842-2011
|
|
GB/T 2791-1995
|
Adhesives, T peel strength test method for a flexible-to-flexible test specimen assembly
|
GB/T 2791-1995
|
|
GB/T 2792-2014
|
Measurement of peel adhesion properties for adhesive tapes
|
GB/T 2792-2014
|
|
GB/T 28021-2011
|
Adornment -- Determination of baneful elements -- Method of spectrometry
|
GB/T 28021-2011
|
|
GB/T 2818-2014
|
Submersible motor for deep well
|
GB/T 2818-2014
|
|
GB/T 2828.1-2012
|
Sampling procedures for inspection by attributes -- Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
|
GB/T 2828.1-2012
|
|
GB/T 28485-2012
|
Coated adornment -- Detection of nickel release -- Method for simulation of wear and corrosion
|
GB/T 28485-2012
|
|
GB/T 28628-2012
|
Test method for air ion concentration of materials
|
GB/T 28628-2012
|
|
GB/T 28784.2-2014
|
Mechanical vibration -- Measurement of vibration on ships -- Part 2: Measurement of structural vibration
|
GB/T 28784.2-2014
|
|
GB/T 2881-2008
|
Silicon metal
|
GB/T 2881-2008
|
|
GB/T 2888-2008
|
Methods of noise measurement for fans blowers compressors and roots blowers
|
GB/T 2888-2008
|
|
GB/T 2910.10-2009
|
Textiles -- Quantitative chemical analysis -- Part 10: Mixtures of triacetate or polylactide and certain other fibres (method using dichloromethane)
|
GB/T 2910.10-2009
|
|
GB/T 2910.11-2009
|
Textiles -- Quantitative chemical analysis -- Part 11: Mixtures of cellulose and polyester fibres (method using sulfuric acid)
|
GB/T 2910.11-2009
|
|
GB/T 2910.1-2009
|
Textiles -- Quantitative chemical analysis -- Part 1: General principles of testing
|
GB/T 2910.1-2009
|
|
GB/T 2910.20-2009
|
Textiles -- Quantitative chemical analysis -- Part 20: Mixtures of elastane and some other fibers (method of using dimethylacetamide)
|
GB/T 2910.20-2009
|
|
GB/T 2910.2-2009
|
Textiles -- Quantitative chemical analysis -- Part 2: Ternary fibre mixture
|
GB/T 2910.2-2009
|
|
GB/T 2910.22-2009
|
Textiles -- Quantitative chemical analysis -- Part 22: Mixtures of viscose or certain types of cupro or modal or lyocell and flax of ramie fibres (method using formic acid and zinc chloride)
|
GB/T 2910.22-2009
|
|
GB/T 2910.23-2009
|
Textiles -- Quantitative chemical analysis -- Part 23: Mixtures of polyethylene and polypropylene (method using cyclohexanone)
|
GB/T 2910.23-2009
|
|
GB/T 2910.24-2009
|
Textiles -- Quantitative chemical analysis -- Part 24: Mixtures of polyester and some other fibers (method using phenol and tetrachloroethane)
|
GB/T 2910.24-2009
|
|
GB/T 2910.3-2009
|
Textiles -- Quantitative chemical analysis -- Part 3: Mixtures of acetate and certain other fibers (method using acetone)
|
GB/T 2910.3-2009
|
|
GB/T 2910.4-2009
|
Textiles -- Quantitative chemical analysis -- Part 4: Mixtures of protein and certain other fibers (method using hypochlorite)
|
GB/T 2910.4-2009
|
|
GB/T 2910.5-2009
|
Textiles -- Quantitative chemical analysis -- Part 5: Mixtures of viscose, cupro or modal and cotton fibers (method using sodium zincate)
|
GB/T 2910.5-2009
|
|
GB/T 2910.6-2009
|
Textiles -- Quantitative chemical analysis -- Part 6: Mixtures of viscose or certain types of cupro or modal or lyocell and cotton fibers (method using formic acid and zinc chloride)
|
GB/T 2910.6-2009
|
|
GB/T 2910.7-2009
|
Textiles -- Quantitative chemical analysis -- Part 7: Mixtures of polyamide and certain other fibers (method using formic acid)
|
GB/T 2910.7-2009
|
|
GB/T 2910.8-2009
|
Textiles -- Quantitative chemical analysis -- Part 8: Mixtures of acetate and triacetate fibers (method using acetone)
|
GB/T 2910.8-2009
|
|
GB/T 2910.9-2009
|
Textiles -- Quantitative chemical analysis -- Part 9: Mixtures of acetate and triacetate fibres (method using benzyl alcohol)
|
GB/T 2910.9-2009
|
|
GB/T 2912.1-2009
|
Textiles -- Determination of formaldehyde -- Part 1: Free and hydrolyzed formaldehyde (water extraction method)
|
GB/T 2912.1-2009
|
|
GB/T 2912.2-2009
|
Textiles -- Determination of formaldehyde -- Part 2: Released formaldehyde (vapour absorption method)
|
GB/T 2912.2-2009
|
|
GB/T 29371.1-2012
|
Technical rules for seed producing system of two-line hybrid rice -- Part 1: Terminology
|
GB/T 29371.1-2012
|
|
GB/T 29371.2-2012
|
Technical rules for seed producing system of two-line hybrid rice -- Part 2: Technical rules for foundation seed production of photo/thermo-sensitive genic male sterile line
|
GB/T 29371.2-2012
|
|
GB/T 29371.3-2012
|
Technical rules for seed producing system of two-line hybrid rice -- Part 3: Technical rules for seed multiplication of photo/thermo-sensitive genic male sterile line
|
GB/T 29371.3-2012
|
|
GB/T 29371.5-2012
|
Technical rules for seed production system of two-line hybrid rice -- Part 5: Technical rules for identification of variety purity and male sterility of MS line
|
GB/T 29371.5-2012
|
|
GB/T 294-2015
|
Rolling bearings -- Three-point and four-point contact ball bearings -- Boundary dimensions
|
GB/T 294-2015
|
|
GB/T 29602-2013
|
Solid beverages
|
GB/T 29602-2013
|
|
GB/T 296-2015
|
Rolling bearings -- Double row angular contact ball bearings -- Boundary dimensions
|
GB/T 296-2015
|
|
GB/T 297-2015
|
Rolling bearings -- Tapered roller bearings -- Boundary dimensions
|
GB/T 297-2015
|
|
GB/T 2985-2008
|
Biological microscope
|
GB/T 2985-2008
|
|
GB/T 29862-2013
|
Textiles - Identification of fiber content
|
GB/T 29862-2013
|
|
GB/T 2997-2015
|
Test method for bulk density, apparent porosity and true porosity of dense shaped refractory products
|
GB/T 2997-2015
|
|
GB/T 2999-2016
|
Refractory materials -- Determination of bulk density of granular materials
|
GB/T 2999-2016
|
|
GB/T 3001-2007
|
Refractory products -- Determination of modulus of rupture at ambient temperature
|
GB/T 3001-2007
|
|
GB/T 3002-2004
|
Refractory products -- Determination of modulus of rupture at elevated temperatures
|
GB/T 3002-2004
|
|
GB/T 3007-2006
|
Refractories -- Determination of moisture content
|
GB/T 3007-2006
|
|
GB/T 301-2015
|
Rolling bearings -- Thrust ball bearings -- Boundary dimensions
|
GB/T 301-2015
|
|
GB/T 30126-2013
|
Textiles - Testing and evaluation for anti-mosquitoes properties
|
GB/T 30126-2013
|
|
GB/T 30332-2013
|
Warehouse receipt fundamental element and form
|
GB/T 30332-2013
|
|
GB/T 304.2-2015
|
Spherical plain bearings -- Identification code
|
GB/T 304.2-2015
|
|
GB/T 3048.4-2007
|
Test methods for electrical properties of electric cables and wires -- Part 4: Test of DC resistance of conductors
|
GB/T 3048.4-2007
|
|
GB/T 3048.5-2007
|
Test methods for electrical properties of electric cables and wires -- Part 5: Test of insulation resistance
|
GB/T 3048.5-2007
|
|
GB/T 3048.9-2007
|
Test methods for electrical properties of electric cables and wires -- Part 9: Spark test of insulated cores
|
GB/T 3048.9-2007
|
|
GB/T 3058-2008
|
Determination of arsenic in coal
|
GB/T 3058-2008
|
|
GB/T 30648.2-2015
|
Paints and varnishes -- Determination of resistance to liquids -- Part 2: Water immersion method
|
GB/T 30648.2-2015
|
|
GB/T 30733-2014
|
Determination of total carbon, hydrogen and nitrogen content in coal -- Instrumental method
|
GB/T 30733-2014
|
|
GB/T 3074.1-2008
|
Method for the determination of the flexure strength of graphite electrodes
|
GB/T 3074.1-2008
|
|
GB/T 3074.4-2003
|
Method for the determination of the coefficient of thermal expansion of graphite electrodes
|
GB/T 3074.4-2003
|
|
GB/T 30762-2014
|
Quality grading standards of main bamboo shoot
|
GB/T 30762-2014
|
|
GB/T 30789.1-2015
|
Paints and varnishes -- Evaluation of degradation of coatings -- Designation of quantity and size of defects, and of intensity of uniform changes in appearance -- Part 1: General introduction and designation system
|
GB/T 30789.1-2015
|
|
GB/T 30789.4-2015
|
Paints and varnishes -- Evaluation of degradation of coatings -- Designation of quantity and size of defects, and of intensity of uniform changes in appearance -- Part 4: Assessment of degree of cracking
|
GB/T 30789.4-2015
|
|
GB/T 30801-2014
|
Hygrothermal performance of building materials and products -- Determination of water-vapour transmission properties -- Box method
|
GB/T 30801-2014
|
|
GB/T 30802-2014
|
Thermal insulating products for building applications -- Determination of behaviour under point load
|
GB/T 30802-2014
|