|
Std ID |
Description (Standard Title) |
|
GB/T 3103.1-1982
|
Tolerances for fasteners--Bolts, screws and nuts
|
|
GB/T 3103.2-1982
|
Tolerances for fasteners. Bolts, screws and nuts for fine mechanics
|
|
GB/T 3103.3-1982
|
Tolerances for fasteners--Washers
|
|
GB/T 3104-1982
|
Fasteners. Widths across flats of hexagon products
|
|
GB/T 3105-1982
|
Radii under the head of bolts and screws
|
|
GB/T 3106-1982
|
Bolts, screws and studs. Nominal lengths and thread lengths for general purpose bolts
|
|
GB/T 1009-1978
|
(Nuts special technical conditions)
|
|
GB/T 1017-1978
|
(Rivet special technical conditions)
|
|
GB/T 1168-1976
|
Studs--Technical requirements
|
|
GB/T 1007-1976
|
Small hexagon medium thin nuts
|
|
GB/T 1021-1976
|
Lock washers with angular upturn tab perpendicular to the lug
|
|
GB/T 1022-1976
|
Lock washers with angular upturn tab in line to the lug
|
|
GB/T 1023-1976
|
Lock washers with angular upturn tab perpendicular to the external tab
|
|
GB/T 1024-1976
|
Lock washers with angular upturn tab in line to the external tab
|
|
GB/T 22-1976
|
Bolts, small hexagon head with fit neck
|
|
GB/T 23-1976
|
Bolts, small hexagon head with hole through the shank
|
|
GB/T 24-1976
|
Bolts, small hexagon head with fit neck and hole through the shank
|
|
GB/T 25-1976
|
Bolts, small hexagon head with holes through the head
|
|
GB/T 26-1976
|
Bolts, small hexagon head with fit neck and holes through the head
|
|
GB/T 824-1976
|
Screws, fluted socket head
|
|
GB/T 945-1976
|
Screws, cross recessed, thin raised cheese head
|
|
GB/T 973-1976
|
Screws, cross recessed, oval head
|
|
GB/T 974-1976
|
Screws, cross recessed, 120 degree raised countersunk head
|
|
GB/T 7948-2024
|
Plain bearings - Test method for PV limit of plastic bushes
|
|
GB/T 42613-2023
|
Plain bearings - Testing of bearing materials - Resistance to corrosion by lubricants under static conditions
|
|
GB/T 42614-2023
|
Plain bearings - Metallic thin-walled half bearings without flange - Determination of the σ0.01*-limit
|
|
GB/T 14910-2023
|
Plain bearings - Technical requirements on backings for thick-walled multilayer bearings
|
|
GB/T 18329.1-2023
|
Plain bearings - Metallic multilayer plain bearings - Part 1: Non-destructive ultrasonic testing of bond of thickness greater than or equal to 0.5 mm
|
|
GB/T 18329.2-2023
|
Plain bearings - Metallic multilayer plain bearings - Part 2: Destructive testing of bond for bearing metal layer thicknesses greater than or equal to 2 mm
|
|
GB/T 43324-2023
|
Foil bearings - Performance of hydrodynamic gas thrust bearings - Testing of static load capacity, bearing torque, friction coefficient and lifetime
|
|
GB/T 18323-2022
|
Plain bearings - Sintered bushes - Dimensions and tolerances
|
|
GB/T 18326-2022
|
Plain bearings - Multilayer materials for thin-walled plain bearings
|
|
GB/T 18329.3-2021
|
Plain bearings - Metallic multilayer plain bearings - Part 3: Non-destructive penetrant testing
|
|
GB/T 18329.4-2021
|
Plain bearings - Metallic multilayer plain bearings - Part 4: Non-destructive ultrasonic transmission testing of bond of thickness greater than or equal to 0.3 mm
|
|
GB/T 2889.5-2021
|
Plain bearings - Terms, definitions, classification and symbols - Part 5: Application of symbols
|
|
GB/T 39644-2021
|
Plain bearings - Technical specifications for Tin-based alloy plain bearings of rotating machinery
|
|
GB/T 39741.1-2021
|
Plain bearings - Tolerances - Part 1: Fits
|
|
GB/T 39741.2-2021
|
Plain bearings - Tolerances - Part 2: Tolerances on geometrical characteristics and surface roughness for shafts and thrust collars
|
|
GB/T 39742-2021
|
Plain bearings - Aluminum alloys for solid bearings
|
|
GB/T 39743-2021
|
Plain bearings - Thermoplastic bushes - Dimensions and tolerances
|
|
GB/T 7308.1-2021
|
Plain bearings - Thin-walled half bearings with or without flange - Part 1: Tolerances, design features and methods of test
|
|
GB/T 7308.2-2021
|
Plain bearings - Thin-walled half bearings with or without flange - Part 2: Measurement of wall thickness and flange thickness
|
|
GB/T 7308.3-2021
|
Plain bearings - Thin-walled half bearings with or without flange - Part 3: Measurement of peripheral length
|
|
GB/T 39982-2021
|
Water lubricated journal bearings - Test methods of load carrying capacity
|
|
GB/T 13345-2021
|
Oil film bearing for flat rolling mill
|
|
GB/T 40118-2021
|
Plain bearings - Testing under conditions of hydrodynamic and mixed lubrication in test rigs
|
|
GB/T 40116-2021
|
Foil bearings - Performance of hydrodynamic gas journal bearings - Testing of static load capacity, friction coefficient and lifetime
|
|
GB/T 2889.1-2020
|
Plain bearings - Terms, definitions, classification and symbols - Part 1: Design, bearing materials and their properties
|
|
GB/T 2889.2-2020
|
Plain bearings - Terms, definitions, classification and symbols - Part 2: Friction and wear
|
|
GB/T 2889.3-2020
|
Plain bearings - Terms, definitions, classification and symbols - Part 3: Lubrication
|
|
GB/T 2889.6-2020
|
Plain bearings - Terms, definitions, classification and symbols - Part 6: Abbreviated terms
|
|
GB/T 39142.1-2020
|
Specification of plastic-steel bilayer self-lubricating materials - Part 1: Running-in layer with modified PTFE tape
|
|
GB/T 39333-2020
|
Plain bearings - Quality assurance of sample types - Definitions, applications and testing
|
|
GB/T 39431-2020
|
Plain bearings - Bearings containing dispersed solid lubricants
|
|
GB/T 37677-2019
|
Plain bearings - Recommendations for automotive crankshaft bearing environments
|
|
GB/T 37774-2019
|
Plain bearings - Pad materials for tilting pad bearings
|
|
GB/T 38191-2019
|
Plain Bearing - Nickel Alloy Self-lubricated Bearing Material Specifications
|
|
GB/T 35083.1-2018
|
Plain bearings -- Testing of the tribological behaviour of bearing materials -- Part 1: Testing of bearing metals
|
|
GB/T 35083.2-2018
|
Plain bearings -- Testing of the tribological behaviour of bearing materials -- Part 2: Testing of polymer-based bearing materials
|
|
GB/T 35087-2018
|
Plain bearings -- Lubrication holes, grooves and pockets -- Dimensions, types, designation and their application to bearing bushes
|
|
GB/T 35088-2018
|
Plain bearings -- Tin casting alloys for multilayer plain bearings
|
|
GB/T 18844.1-2018
|
Plain bearings -- Type, appearance and characterization, causes of damage to metallic hydrodynamic bearings -- Part 1: General
|
|
GB/T 18844.2-2018
|
Plain bearings -- Type, appearance and characterization, causes of damage to metallic hydrodynamic bearings -- Part 2: Cavitation erosion and its countermeasures
|
|
GB/T 37169-2018
|
Metal mesh based PTFE strip specification and test methods
|
|
GB/T 37171-2018
|
Specification and test methods for bronze plate containing diamond-shaped solid lubricant
|
|
GB/T 34633.1-2017
|
Plain bearings -- Pedestal plain bearings -- Part 1: Pillow blocks
|
|
GB/T 34633.2-2017
|
Plain bearings -- Pedestal plain bearings -- Part 2: Side flange bearings
|
|
GB/T 34633.3-2017
|
Plain bearings -- Pedestal plain bearings -- Part 3: Centre flange bearings
|
|
GB/T 2688-2012
|
Plain bearing -- Technical specification of powder metallurgy bearing
|
|
GB/T 28278.1-2012
|
Plain bearings -- Hydrostatic plain journal bearings without drainage grooves under steady-state conditions -- Part 1: Calculation of oil-lubricated plain journal bearings without drainage grooves
|
|
GB/T 28278.2-2012
|
Plain bearings -- Hydrostatic plain journal bearings without drainage grooves under steady-state conditions -- Part 2: Characteristic values for calculation of oil-lubricated plain journal bearings without drainage grooves
|
|
GB/T 28279.1-2012
|
Plain bearing -- Hydrostatic plain journal bearings with drainage grooves under steady-state conditions -- Part 1: Calculation of oil-lubricated plain journal bearings with drainage grooves
|
|
GB/T 28279.2-2012
|
Plain bearings -- Hydrostatic plain journal bearings with drainage grooves under steady-state conditions -- Part 2: Characteristic values for calculation of oil-lubricated plain journal bearings with drainage grooves
|
|
GB/T 28280-2012
|
Plain bearings -- Quality characteristics -- Calculation of machine and process capabilities
|
|
GB/T 28281-2012
|
Plain bearings -- Quality characteristics -- Statistical process control (SPC)
|
|
GB/T 27553.1-2011
|
Specification of plastics-bronze-steel backing triple-layer self-lubricating materials - Part 1: Plastic overlay with modified PTFE
|
|
GB/T 12613.1-2011
|
Plain bearings -- Wrapped bushes -- Part 1: Dimensions
|
|
GB/T 12613.2-2011
|
Plain bearings -- Wrapped bushes -- Part 2: Test data for outside and inside diameters
|
|
GB/T 12613.3-2011
|
Plain bearings -- Wrapped bushes -- Part 3: Lubrication holes, grooves and indentations
|
|
GB/T 12613.4-2011
|
Plain bearings -- Wrapped bushes -- Part 4: Materials
|
|
GB/T 12613.5-2011
|
Plain bearings -- Wrapped bushes -- Part 5: Checking the outside diameter
|
|
GB/T 12613.6-2011
|
Plain bearings -- Wrapped bushes -- Part 6: Checking the inside diameter
|
|
GB/T 12613.7-2011
|
Plain bearings -- Wrapped bushes -- Part 7: Measurement of wall thickness of thin-walled bushes
|
|
GB/T 27553.2-2011
|
Specification of plastics-bronze-steel backing triple layer self-lubricating materials -- Part 2: Plastic overlay with modified POM
|
|
GB/T 27938-2011
|
Plain bearings -- Thrust washers -- Terms, appearance of damage and cause of failure
|
|
GB/T 27939-2011
|
Plain bearings -- Quality control techniques and inspection of geometrical and material quality characteristics
|
|
GB/T 2889.4-2011
|
Plain bearings -- Terms, definitions, classification and symbols -- Part 4: Basic symbols
|
|
GB/T 18325.2-2009
|
Plain bearing -- Bearing fatigue -- Part 2: Test with a cylindrical specimen of a metallic bearing material
|
|
GB/T 18325.3-2009
|
Plain bearing -- Bearing fatigue -- Part 3: Test on plain strips of a metallic multilayer bearing material
|
|
GB/T 18325.4-2009
|
Plain bearings -- Bearing fatigue -- Part 4: Test on half-bearings of a metallic multilayer bearing material
|
|
GB/T 23891.1-2009
|
Plain bearings -- Hydrodynamic plain thrust pad bearings under steady-state conditions -- Part 1: Calculation of thrust pad bearings
|
|
GB/T 23891.2-2009
|
Plain bearings -- Hydrodynamic plain thrust pad bearings under steady-state conditions -- Part 2: Functions for the calculation of thrust pad bearings
|
|
GB/T 23891.3-2009
|
Plain bearings -- Hydrodynamic plain thrust pad bearings under steady-state conditions -- Part 3: Guide values for the calculation of thrust pad bearings
|
|
GB/T 23892.1-2009
|
Plain bearings -- Hydrodynamic plain tilting pad thrust bearings under steady-state conditions -- Part 1: Calculation of tilting pad thrust bearings
|
|
GB/T 23892.2-2009
|
Plain bearings -- Hydrodynamic plain tilting pad thrust bearings under steady-state conditions -- Part 2: Functions for calculation of tilting pad thrust bearings
|
|
GB/T 23892.3-2009
|
Plain bearings -- Hydrodynamic plain tilting pad thrust bearings under steady-state conditions -- Part 3: Guide values for the calculation of tilting pad thrust bearings
|
|
GB/T 23893-2009
|
Thermoplastic polymers for plain bearings -- Classification and designation
|
|
GB/T 23894-2009
|
Plain bearing -- Copper alloy bearing with solid lubricant
|
|
GB/T 23895-2009
|
Plain bearings -- Quality assurance of thin-walled half bearings -- Selective assembly of bearings to achieve a narrow clearance
|
|
GB/T 23896-2009
|
Plain bearings -- Quality assurance of thin-walled half bearings -- Design FMEA
|