|
US$154.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 23896-2009: Plain bearings -- Quality assurance of thin-walled half bearings -- Design FMEA
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 23896-2009 | English | 154 |
Add to Cart
|
3 days [Need to translate]
|
Plain bearings -- Quality assurance of thin-walled half bearings -- Design FMEA
| Valid |
GB/T 23896-2009
|
PDF similar to GB/T 23896-2009
Basic data | Standard ID | GB/T 23896-2009 (GB/T23896-2009) | | Description (Translated English) | Plain bearings -- Quality assurance of thin-walled half bearings -- Design FMEA | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J12 | | Classification of International Standard | 21.100.10 | | Word Count Estimation | 8,850 | | Date of Issue | 2009-05-26 | | Date of Implementation | 2009-12-01 | | Adopted Standard | ISO 12132-1999, IDT | | Regulation (derived from) | PRC National Standard Approval Announcement 2009 No.7 (Total No.147) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the FMEA engine thin wall bearing the design process (FMEA production process is the responsibility of the supplier). Standard lists common potential failure modes and their effects and potential causes. For each use, every manufacturers and users, failure can occur, numerical assessment of severity and risk of detection to make specific provisions. The need to make an assessment of each case, and therefore the risk of data is not included in this standard. General guidelines for assessing statistically. Can be obtained from the reference data. | GB/T 23896-2009: Plain bearings -- Quality assurance of thin-walled half bearings -- Design FMEA---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Plain bearings. Quality assurance of thin-Walled half bearings. Design FMEA
ICS 21.100.10
J12
National Standards of People's Republic of China
GB/T 23896-2009/ISO 12132.1999
Quality assurance of thin-walled plain bearing bush
Failure mode and effects design stage Analysis (FMEA)
(ISO 12132.1999, IDT)
Posted 2009-05-26
2009-12-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This standard is equivalent to using ISO 12132.1999 "thin wall bearing bush quality assurance failure mode and effects design phase points
Analysis "(in English).
This standard is equivalent translation ISO 12132.1999.
For ease of use, this standard made the following editorial changes.
--- "This International Standard" be replaced by "this standard";
--- Delete international standards foreword.
The standard proposed by China Machinery Industry Federation.
This standard sliding bearing by the National Standardization Technical Committee (SAC/TC236) centralized.
This standard was drafted. the machine Productivity Promotion Center, Chengdu Railway Parts Co., Ltd. Trinity strong.
This standard by the National Standardization Technical Committee Secretariat slide bearing responsible for the interpretation.
This standard is the first release.
GB/T 23896-2009/ISO 12132.1999
ISO Introduction
FMEA (failure mode and effects analysis) is determined to help the potential failure of product design and eliminate these failures at the design stage points
Analytical methods (given in tabular form).
FMEA empirical probability theory and the practice of integrated design and plain bearings use basis.
FMEA analysis of their applications to improve the product quality and reliability, as well as product quality and reliability of the process, but also drop
Low-cost technology for product testing and process improvement.
System design phase of the implementation of FMEA, a large number of documents have been discussed, it is not included in this standard within the scope of the discussion. These bodies
Department can help existing and planned analysis of complex design projects.
GB/T 23896-2009/ISO 12132.1999
Quality assurance of thin-walled plain bearing bush
Failure mode and effects design stage Analysis (FMEA)
1 Scope
This standard provides guidance for the design of the internal combustion engine of thin-walled bush FMEA (FMEA production process is the responsibility of the supplier),
Standard lists common potential failure modes and effects and potential causes.
For every application, every manufacturer and user, the risk of failure can occur, the severity and detection of Numerical evaluation
Make specific provisions.
The need to make an assessment of each case, so the risk of data not included in this standard. General guidelines were evaluated statistically,
Available from Resources.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 7826 system reliability analysis techniques for failure mode and effects analysis (FMEA) program (GB/T 7826-1987,
idtIEC 60812. 1985)
GB/T 18844-2002 bearing damage and changes in appearance terms, characteristics and causes (idtISO 7146.1993)
3 Terms and Definitions
GB/T Terms and 7826 in the following terms and definitions apply to this established standard.
3.1
Failure mode and effects analysis FMEA
Failure mode and effects analysis is a reliability analysis method, the purpose of the system performance within the scope of application to determine the impact of the considered yield
Health Failure serious consequences.
3.2
In the development of the product by the designer completed FMEA.
3.3
On bearing a failure to observe the appearance.
3.4
Failure mode on the consequences of the internal combustion engine.
3.5
Cause failure mode of the defects.
4 Common Bush's potential failure modes, effects and causes
The internal combustion engine connecting rod bearings and main bearing, is only part of an integrated system, the system including lubricants, lubrication systems, crankshaft, machine
GB/T 23896-2009/ISO 12132.1999
|