|
US$489.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 7308.1-2021: Plain bearings - Thin-walled half bearings with or without flange - Part 1: Tolerances, design features and methods of test
Status: Valid GB/T 7308.1: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 7308.1-2021 | English | 489 |
Add to Cart
|
5 days [Need to translate]
|
Plain bearings - Thin-walled half bearings with or without flange - Part 1: Tolerances, design features and methods of test
| Valid |
GB/T 7308.1-2021
|
| GB/T 7308-2008 | English | 719 |
Add to Cart
|
3 days [Need to translate]
|
Plain bearings -- Thin-walled half bearings with or without flange -- Tolerances, design features and methods of test
| Obsolete |
GB/T 7308-2008
|
| GB/T 7308-1987 | English | 559 |
Add to Cart
|
4 days [Need to translate]
|
Plain bearings--Thin-walled flanged half bearings--Dimensions, tolerances and methods of checking
| Obsolete |
GB/T 7308-1987
|
PDF similar to GB/T 7308.1-2021
Basic data | Standard ID | GB/T 7308.1-2021 (GB/T7308.1-2021) | | Description (Translated English) | Plain bearings - Thin-walled half bearings with or without flange - Part 1: Tolerances, design features and methods of test | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J12 | | Word Count Estimation | 26,273 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 7308.1-2021: Plain bearings - Thin-walled half bearings with or without flange - Part 1: Tolerances, design features and methods of test
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Plain bearings - Thin-walled half bearings with or without flange - Part 1.Tolerances, design features and methods of test
ICS 21.100.10
J12
National Standards of People's Republic of China
Replace GB/T 7308-2008
Sliding bearings have flanges or thin-walled bushes without flanges
Part 1.Tolerances, structural elements and inspection methods
(ISO 3548-1.2014,MOD)
Released on 2021-03-09
2021-10-01 implementation
State Administration of Market Supervision and Administration
Issued by the National Standardization Management Committee
Foreword
GB/T 7308 "Sliding bearings with flanges or thin-walled bearings without flanges" is divided into 3 parts.
---Part 1.Tolerances, structural elements and inspection methods;
---Part 2.Measurement of bearing wall thickness and flange thickness;
---Part 3.Circumference measurement.
This part is Part 1 of GB/T 7308.
This section was drafted in accordance with the rules given in GB/T 1.1-2009.
This part replaces GB/T 7308-2008 "Tolerances, structural elements and inspection methods for sliding bearings with flanges or thin-walled bearings without flanges.
Compared with GB/T 7308-2008, the main technical changes are as follows.
---GB/T 7308.3 replaced TB/T 2958 in the normative references (see Chapter 2, Chapter 2 of the.2008 edition);
--- Change the bearing shell back roughness corresponding to the bearing seat hole diameter 80~120 in Table 2 to 1.2 (see Table 2, Table 2 of the.2008 edition);
---Added the technical requirements for the parallelism of the mouth face (see 4.5);
---Modified the formula in Figure 7;
---Revised some of the tolerance values in Table 4;
---The functions and characteristics of the combined flange bearing in Chapter 8 have been added (see Chapter 8).
This part uses the redrafting method to amend and adopt ISO 3548-1.2014 ``Sliding Bearings with Flanged or Flanged Thin-Walled Bearings Part 1
Sub. Tolerances, structural elements and inspection methods.
Compared with ISO 3548-1.2014, this part has technical differences. The corresponding technical differences and their reasons are as follows.
---Regarding normative reference documents, this section has made adjustments with technical differences to adapt to my country's technical conditions and adjustments.
The situation is collectively reflected in Chapter 2 "Normative Reference Documents", and the specific adjustments are as follows.
● Replace ISO 4288 with GB/T 10610, which is equivalent to the international standard;
● Deleted ISO 6524;
● Added GB/T 7308.3.
---The numerical errors in Table 2 of ISO 3548-1.2014 have been corrected. The height of the bearing housing hole diameter from 50 to 80 is changed to 0.035; shaft
The surface roughness of the backing of the bearing hole diameter of 50-80 is changed to 0.8, and the surface roughness of the backing of the bearing hole diameter of 80-120 is changed.
It is 1.2; the second preferred wall thickness corresponding to the diameter of the bearing housing hole from 250 to 315 is changed to 6.
---In order to facilitate the actual operation, the marked position of a1 in Figure 4 is changed from the inner surface to the outer surface.
---Added the technical requirements for the parallelism of the mouth surface (see 4.5).
---According to actual production and usage, some tolerance values in Table 3 and Table 4 have been revised.
---Figure 18 and Figure 19 are modified according to the schematic diagrams of GB/T 7308.3 Method A and Method B.
Compared with ISO 3548-1.2014, this part has the following editorial differences.
---All the letters in the tables have been changed to digital ones;
---Use the symbol s3 to indicate the wall thickness of the top of the bearing bush, and stot to indicate the full wall thickness of the bearing bush;
---Use Δsα instead of u to indicate the amount of wall thickness reduction of the eccentric bearing at the angle α.
This part was proposed by China Machinery Industry Federation.
This part is under the jurisdiction of the National Sliding Bearing Standardization Technical Committee (SAC/TC236).
Drafting organizations of this section. China National Machinery Productivity Promotion Center, Yantai Dafeng Bearing Co., Ltd., Hubei Anda Precision Industry Co., Ltd.,
Ningbo Bearing Factory, Hangzhou Bearing Shijiazhuang Co., Ltd., Chengdu Shengsanqiang Railway Fittings Co., Ltd., Lin'an Dongfang Sliding Bearing Co., Ltd.
This part is explained by the National Standardization Technical Committee of Sliding Bearings.
The previous releases of the standards replaced by this part are as follows.
---GB/T 7308-2008.
Sliding bearings have flanges or thin-walled bushes without flanges
Part 1.Tolerances, structural elements and inspection methods
1 Scope
This part of GB/T 7308 stipulates that the outer diameter of Do to 250mm is integral with flanged thin-walled bearings and the outer diameter of Do to 500mm cannot be
Tolerances, structural elements and inspection methods of blue thin-walled bearings. Due to changes in structural design, the size of the bearing bush is not uniformly specified.
Bearings that comply with this section are mainly used for reciprocating engines, and the bearing is composed of a steel back and one or more layers of bearing alloys inside.
On reciprocating engines, flanged bearings and flangeless bearings can be used at the same time.
The flangeless bearing can be used together with two semicircular thrust washers (thrust plates) conforming to GB/T 10447, or a combined flange bearing,
Replace the integral flange bearing.
Note. All dimensions and tolerances are in millimeters.
2 Normative references
The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this article
Pieces. For undated reference documents, the latest version (including all amendments) is applicable to this document.
GB/T 7308.3 Sliding bearing has flange or flangeless thin-walled bearing part 3.Circumference measurement (GB/T 7308.3-2021,
ISO 3548-3.2012, MOD)
GB/T 10447 Plain bearing semicircular thrust washer elements and tolerances (GB/T 10447-2008, ISO 6526.1983, IDT)
GB/T 10610 Product Geometric Technical Specification Surface Structure Profile Method Rules and Methods for Evaluating Surface Structure
(GB/T 10610-2009, ISO 4288.1996, IDT)
3 symbols
See Figure 1, Figure 2 and Table 1.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 7308.1-2021_English be delivered?Answer: Upon your order, we will start to translate GB/T 7308.1-2021_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 7308.1-2021_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 7308.1-2021_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 7308.1-2021?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 7308.1-2021 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|