|
US$129.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 14910-2023: Plain bearings - Technical requirements on backings for thick-walled multilayer bearings
Status: Valid GB/T 14910: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 14910-2023 | English | 129 |
Add to Cart
|
3 days [Need to translate]
|
Plain bearings - Technical requirements on backings for thick-walled multilayer bearings
| Valid |
GB/T 14910-2023
|
| GB/T 14910-1994 | English | 129 |
Add to Cart
|
2 days [Need to translate]
|
Plain bearings. Requirements on backings for thick-walled multilayer bearings
| Obsolete |
GB/T 14910-1994
|
PDF similar to GB/T 14910-2023
Basic data | Standard ID | GB/T 14910-2023 (GB/T14910-2023) | | Description (Translated English) | Requirements and Inspection Method for Skiing equipment - Part 1: Snow Cat | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | Y50;Y59 | | Classification of International Standard | 97.220.40 | | Word Count Estimation | 18,132 | | Date of Issue | 2023-09-01 | | Date of Implementation | 2023-11-01 | | Issuing agency(ies) | General Administration of Sport | GB/T 14910-2023: Plain bearings - Technical requirements on backings for thick-walled multilayer bearings
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 21:100:10
CCSJ12
National Standards of People's Republic of China
Replace GB/T 14910-1994
Technical requirements for thick-walled multi-layer bearing backings for sliding bearings
multilayerbearings
Published on 2023-11-27
2024-06-01 Implementation
State Administration for Market Regulation
Released by the National Standardization Administration Committee
Foreword
This document complies with the provisions of GB/T 1:1-2020 "Standardization Work Guidelines Part 1: Structure and Drafting Rules of Standardization Documents"
Drafting:
This document replaces GB/T 14910-1994 "Technical Requirements for Thick-walled Multilayer Bearing Backings for Sliding Bearings" and is the same as GB/T 14910-1994
In comparison, in addition to structural adjustments and editorial changes, the main technical changes are as follows:
---Changed the scope of the document (see Chapter 1, Chapter 1 of the:1994 edition);
---Changed the requirements for backing materials (see Chapter 4, Chapter 3 of the:1994 edition);
---Changed the requirements for the joint surface (see Chapter 5, Chapter 4 of the:1994 edition):
This document has been modified to adopt ISO 6280:2018 "Requirements and Guidelines for Thick-walled Multilayer Bearing Backings for Sliding Bearings":
The technical differences between this document and ISO 6280:2018 and their reasons are as follows:
---Added normative reference to GB/T 2889:1 (see Chapter 3) to adapt to my country's technical conditions and increase operability;
---It is added that the steel backing material should be 10 steel, 15 steel, 20 steel specified in GB/T 699, or Q235 specified in GB/T 700
Steel; the cast steel backing material should be ZG200-400 specified in GB/T 11352 (see 4:2) to meet the needs of the Chinese market;
---It is added that the cast iron backing material should be HT250 or other grades of cast iron specified in GB/T 9439 (see 4:3) to suit our needs:
domestic market demand;
---Change the example materials CuSn10 and CuPb5Sn5Zn5 of ISO 6280:2018 to those specified in GB/T 1176
ZCuSn10P1 and ZCuPb5Sn5Zn5 are cast copper alloy materials (see 4:4) to meet the needs of the Chinese market:
The following editorial changes have been made to this document:
---In order to coordinate with the existing standards, the name of the standard is changed to "Technical Requirements for Thick-walled Multi-layer Bearing Backings of Sliding Bearings";
---Changed the expression of surface roughness of the backing's bonding surface (see Chapter 5):
Please note that some content in this document may be subject to patents: The publisher of this document assumes no responsibility for identifying patents:
This document is proposed by China Machinery Industry Federation:
This document is under the jurisdiction of the National Technical Committee for Standardization of Sliding Bearings (SAC/TC236):
This document was drafted by: China Machinery Productivity Promotion Center Co:, Ltd:, Chongqing Yuejin Machinery Factory Co:, Ltd:, Zhejiang Shenfa Bearing Co:, Ltd:
Co:, Ltd:, Jiangsu Xugong Engineering Machinery Research Institute Co:, Ltd:, Yixing Huanyu Bearing Manufacturing Co:, Ltd:, Taiyuan University of Science and Technology, Zhejiang Zhongda Precision
Mi Parts Co:, Ltd:, Zhejiang Changsheng Sliding Bearing Co:, Ltd:, Jiaxing Meter Baoxin Machinery Industry Co:, Ltd:, Jiashan Sanfu
SLIDE BEARINGS CO:, LTD:
This document was first published in:1994 and this is the first revision:
Technical requirements for thick-walled multi-layer bearing backings for sliding bearings
1 Scope
This document specifies the technical requirements for thick-walled multi-layer sliding bearings to obtain the best combination of bearing alloy and backing: The quality of the combination depends on the material:
The chemical composition, stress state, structural design of the material and the processing method of the backing joint surface:
This document applies to the selection and processing of backing materials for thick-walled multi-layer sliding bearings:
Note: Controlling the manufacturing process is an important condition for obtaining the optimal combination quality of bearing alloy and backing:
2 Normative reference documents
The contents of the following documents constitute essential provisions of this document through normative references in the text: Among them, the dated quotations
For undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to
this document:
GB/T 2889:1 Sliding bearing terms, definitions, classifications and symbols Part 1: Structure, bearing materials and their properties
3 Terms and definitions
The terms and definitions defined in GB/T 2889:1 apply to this document:
4 Backing material
4:1 Overview
The backing material can be steel, cast steel, cast iron containing flake graphite or spheroidal graphite, or cast copper alloy:
For cast iron backings, dovetail grooves can be machined on the backing joint surface before casting the bearing alloy to increase mechanical anchoring force:
4:2 Steel and cast steel
Before casting the bearing alloy, the steel and cast steel backing materials should be normalized to relieve stress:
The steel backing material should be 10 steel, 15 steel, 20 steel specified in GB/T 699, or Q235 steel specified in GB/T 700:
The cast steel backing material should be ZG200-400 specified in GB/T 11352:
Typical chemical compositions of backing materials and their contents are as follows:
---C< 0:25%(mass fraction);
---Cr≤1:1% (mass fraction);
---Ni< 0:5% (mass fraction);
---Mn≤1:3% (mass fraction):
When the backing thickness is greater than or equal to 40mm, the hydrogen content should not exceed 1:7mg/kg: Appropriate process measures should be adopted to reduce and control
The hydrogen content makes it meet the specified requirement range to ensure the safe operation of the bearing in the early stage of work:
4:3 cast iron
The cast iron backing material should be HT250 or other grades of cast iron specified in GB/T 9439, whose metallographic structure is ferrite or mostly
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 14910-2023_English be delivered?Answer: Upon your order, we will start to translate GB/T 14910-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 14910-2023_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 14910-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 14910-2023?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 14910-2023 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|