|
Std ID |
Description (Standard Title) |
|
GB/T 39564.1-2020
|
Multi-carrier shared distribution infrastructure for fibre to the home - Part 1: Optical cable cross-connect cabinet
|
|
GB/T 39564.2-2020
|
Multi-carrier shared distribution infrastructure for fiber to the home - Part 2: Optical fibre distribution frame
|
|
GB/T 39564.3-2020
|
Multi-carrier shared distribution infrastructure for fibre to the home - Part 3: Optical distribution box
|
|
GB/T 7424.24-2020
|
Optical fibre cable generic specification - Part 24: Basic optical cable test procedures. Electrical test methods
|
|
GB/T 37083-2018
|
Technical requirements for access network -- Interoperability of ethernet passive optical network (EPON) system
|
|
GB/T 21645.10-2017
|
Technical requirements for automatically switched optical network (ASON) -- Part 10: Multi-layer and multi-region control plane
|
|
GB/T 21645.11-2017
|
Technical requirements for Automatically Switched Optical Network (ASON) -- Part 11: Path Computation Element (PCE) and protocol
|
|
GB/T 33779.1-2017
|
Guidance for special characteristics of optical fibre -- Part 1: Attenuation uniformity
|
|
GB/T 33779.2-2017
|
Guidance for special characteristic of optical fibre -- Part 2: Interpretation of OTDR backscattering traces
|
|
GB/T 33843-2017
|
Test method for access network equipment -- Passive optical network based on ethernet (EPON)
|
|
GB/T 15972.44-2017
|
Specifications for optical fibre test methods -- Part 44: Measurement methods and test procedures for transmission and optical characteristics -- Cut-off wavelength
|
|
GB/T 34081-2017
|
Wavelength selective switch
|
|
GB/T 34087-2017
|
Energy efficiency metrologies and test methods for access equipment -- GPON system
|
|
GB/T 12357.4-2016
|
Multimode optical fibres for telecommunication -- Part 4: Sectional specification for category A4 multimode fibres
|
|
GB/T 13993.1-2016
|
Optical fibre cables for telecommunication -- Part 1: General
|
|
GB/T 15972.48-2016
|
Specifications for optical fibre test methods -- Part 48: Measurement methods and test procedures for transmission and optical characteristics -- Polarization mode dispersion
|
|
GB/T 32657.2-2016
|
Technical requirements for automatically switched optical network (ASON) node -- Part 2: Technical requirements for OTN-based ASON node
|
|
GB/T 12357.1-2015
|
Multimode optical fibres for telecommunication -- Part 1: Sectional specification for category A1 multimode fibres
|
|
GB/T 32385.1-2015
|
Optical fibre perform -- Part 1: Generic specification
|
|
GB/T 13993.2-2014
|
The series of optical fibre cables for telecommunication -- Part 2: Outdoor optical fibre cables for core networks
|
|
GB/T 13993.3-2014
|
The series of optical fiber cables for telecommunication -- Part 3: Indoor optical fiber cables for generic cabling
|
|
GB/T 13993.4-2014
|
The series of optical fibre cables for telecommunication -- Part 4: Outdoor optical fibre cables for access networks
|
|
GB/T 31242-2014
|
Characteristics of single-mode optical fibers for equipment intraconnection
|
|
GB/T 21645.5-2012
|
Technical requirements for automatically switched optical network -- Part 5: User -- Network Interface (UNI)
|
|
GB/T 21645.8-2012
|
Technical requirements for automatically switched optical network -- Part 8: Routing
|
|
GB/T 21645.9-2012
|
Technical requirements for automatically switched optical network (ASON) -- Part 9: External network to network interface (E-NNI)
|
|
GB/T 28504.1-2012
|
Rare earth doped optical fibre -- Part 1: Characteristics of double-cladding Ytterbium-doped optical fibre
|
|
GB/T 28511.1-2012
|
Integrated optical path devices based on planar light wave circuit -- Part 1: Optical power splitter based on PLC technology
|
|
GB/T 28511.2-2012
|
Integrated optical path devices based on planar light wave circuit -- Part 2: DWDM filter based on AWG technology
|
|
GB/T 28514.3-2012
|
IPv6 routing protocol -- Part 3: Intermediate system to intermediate system intra-domain routing information exchange protocol (IS-ISv6)
|
|
GB/T 28515.1-2012
|
Test specifications for automatically switched optical network (ASON) -- Part 1: Test specifications for SDH-based ASON
|
|
GB/T 28518-2012
|
Flame resistant optical fibre cables for communication for mine
|
|
GB/T 29199-2012
|
Test methods for rodent resistance of optical fiber cable
|
|
GB/T 29229-2012
|
Technical requirements for ethernet passive optical network (EPON)
|
|
GB/T 29230.1-2012
|
Opto-electronic-opto bidirectional wavelength converter for plastic optical fiber transmission system -- Part 1: Wavelength converter between 650nm and 1550nm (or 1310nm or 850nm) of 100Mbit/s ethernet
|
|
GB/T 29231-2012
|
Opto-electronic-opto transceiver of 650nm 100Mbps ethernet for plastic optical fiber transmission system
|
|
GB/T 29232-2012
|
Network adapter of 650nm 100Mbps ethernet for plastic optical fiber
|
|
GB/T 29233-2012
|
Single mode optical fibre telecommunication cables for outdoor duct, directly buried, and lashed aerial application
|
|
GB/T 7424.5-2012
|
Optical fibre cables -- Part 5: Sectional specification -- Micro duct optical fibre cables and fibre units for installation by blowing
|
|
GB/T 9771.7-2012
|
Single-mode optical fibres for telecommunication -- Part 7: Characteristics of a bending loss insensitive single-mode optical fibre for the access network
|
|
GB/T 21645.2-2010
|
Technical requirements for automatically switched optical networks -- Part 2: Terms and definitions
|
|
GB/T 21645.4-2010
|
Technical requirements for automatically switched optical network -- Part 4: Technical specification of signalling
|
|
GB/T 21645.7-2010
|
Technical requirements for automatically switched optical network -- Part 7: Automatic discovery
|
|
GB/T 15972.55-2009
|
Specifications for optical fibre test methods -- Part 55: Measurement methods and test procedures for environmental characteristics -- Hydrogen aging
|
|
GB/T 21645.3-2009
|
Technical requirements for automatically switched optical network -- Part 3: Data communication network
|
|
GB/T 21645.6-2009
|
Technical requirements for automatically switched optical network -- Part 6: Management plane
|
|
GB/T 24365-2009
|
Testing methods of optoelectronic detector module for communication
|
|
GB/T 24366-2009
|
Technical requirements of optoelectronic detector module for communication
|
|
GB/T 24367.1-2009
|
Technical requirements for automatically switched optical network (ASON) node -- Part 1: Technical requirements for SDH-based ASON node
|
|
GB/T 14731-2008
|
Synchronous digital hierarchy (SDH) bit rates
|
|
GB/T 15409-2008
|
Frame structure for synchronous digital hierarchy signal
|
|
GB/T 15940-2008
|
Basic multiplexing structure for synchronous digital hierarchy signals
|
|
GB/T 15941-2008
|
Requirements for Synchronous Digital hierarchy (SDH) Optical Fiber Cable Line Systems
|
|
GB/T 15972.10-2008
|
Specifications for optical fibre test methods -- Part 10: Measurement methods and test procedures -- General and guidance
|
|
GB/T 15972.20-2008
|
Specifications for optical fibre test methods -- Part 20: Measurement methods and test procedures for dimensions -- Fiber geometry
|
|
GB/T 15972.21-2008
|
Specifications for optical fibre test methods -- Part 121: Measurement methods and test procedures for dimensions -- Coating geometry
|
|
GB/T 15972.22-2008
|
Specifications for optical fibre test methods -- Part 22: Measurement methods and test procedures for dimensions -- Length measurement
|
|
GB/T 15972.30-2008
|
Specifications for optical fibre test methods -- Part 30: Measurement methods and test procedures for mechanical characteristics -- Fibre proof test
|
|
GB/T 15972.31-2008
|
Specifications for optical fibre test methods -- Part 31: Measurement methods and test procedures for mechanical characteristics -- Tensile strength
|
|
GB/T 15972.32-2008
|
Specifications for optical fibre test methods -- Part 32: Measurement methods and test procedures for mechanical characteristics -- Coating stripability
|
|
GB/T 15972.33-2008
|
Specifications for optical fibre test methods -- Part 33: Measurement methods and test procedures for mechanical characteristics -- Stress corrosion susceptibility
|
|
GB/T 15972.34-2008
|
Specifications for optical fibre test methods -- Part 34: Measurement methods and test procedures for mechanical characteristics -- Fibre curl
|
|
GB/T 15972.40-2008
|
Specifications for optical fibre test methods -- Part 40: Measurement methods and test procedures for transmission and optical characteristics -- Attenuation
|
|
GB/T 15972.41-2008
|
Specifications for optical fibre test methods -- Part 41: Measurement methods and test procedures for transmission and optical characteristics -- Bandwidth
|
|
GB/T 15972.42-2008
|
Specifications for optical fibre test methods -- Part 42: Measurement methods and test procedures for transmission and optical characteristics -- Chromatic dispersion
|
|
GB/T 15972.43-2008
|
Specifications for optical fibre test methods -- Part 43: Measurement methods and test procedures for transmission and optical characteristics -- Numerical aperture
|
|
GB/T 15972.44-2008
|
Specifications for optical fibre test methods -- Part 44: Measurement methods and test procedures for transmission and optical characteristics -- Cut-off wavelength
|
|
GB/T 15972.45-2008
|
Specifications for optical fibre test methods -- Part 45: Measurement methods and test procedures for transmission and optical characteristics -- Mode field diameter
|
|
GB/T 15972.46-2008
|
Specifications for optical fibre test methods -- Part 46: Measurement methods and test procedures for transmission and optical characteristics -- Monitoring of changes in optical transmittance
|
|
GB/T 15972.47-2008
|
Specifications for optical fibre test methods -- Part 47: Measurement methods and test procedures for transmission and optical characteristics -- Macro-bending loss
|
|
GB/T 15972.49-2008
|
Specifications for optical fibre test methods -- Part 49: Measurement methods and test procedures for transmission and optical characteristics -- Differential mode delay
|
|
GB/T 15972.50-2008
|
Specifications for optical fibre test methods -- Part 50: Measurement methods and test procedures for environmental characteristics -- Damp heat (steady state)
|
|
GB/T 15972.51-2008
|
Specifications for optical fibre test methods -- Part 51: Measurement methods and test procedures for environmental characteristics -- Dry heat
|
|
GB/T 15972.52-2008
|
Specifications for optical fibre test methods -- Part 52: Measurement methods and test procedures for environmental characteristics -- Change of temperature
|
|
GB/T 15972.53-2008
|
Specifications for optical fibre test methods -- Part 53: Measurement methods and test procedures for environmental characteristics -- Water immersion
|
|
GB/T 15972.54-2008
|
Specifications for optical fibre test methods -- Part 54: Measurement methods and test procedures for environmental characteristics -- Gamma irradiation
|
|
GB/T 16712-2008
|
Characteristics of synchronous digital hierarchy (SDH) equipment functional blocks
|
|
GB/T 16814-2008
|
Methods of measurement for synchronous digital hierarchy (SDH) optical fiber cable line system
|
|
GB/T 16849-2008
|
Generic specification of optical fiber amplifier
|
|
GB/T 18898.2-2008
|
Erbium-doped fiber amplifier -- L-band Erbium-doped fiber amplifier
|
|
GB/T 20186.2-2008
|
Secondary coating materials used for optical fiber -- Part 2: Modified propylene resin
|
|
GB/T 21639-2008
|
The technical requirements of video conferencing service for IP-based network
|
|
GB/T 21640-2008
|
Technical standards for cooperation between equipment of IP-based video conference system
|
|
GB/T 21641-2008
|
Technique requirements of video conferencing system inter working between different technologies
|
|
GB/T 21642.1-2008
|
The technical requirements for video conference system devices based on IP-based network -- Part 1: Multipoint Controller
|
|
GB/T 21642.2-2008
|
The technical requirements for video conference system devices based on IP-based network -- Part 2: Multipoint Processor
|
|
GB/T 21643-2008
|
IP Authentication Header
|
|
GB/T 21645.1-2008
|
Technical requirements for automatically switched optical network -- Part 1: Architecture and general requirements
|
|
GB/T 21647-2008
|
B-ISDN ATM adaptation layer specification: Type 2 AAL
|
|
GB/T 7424.2-2008
|
Optical fibre cable generic specification -- Part 2: Basic optical cable test procedures
|
|
GB/T 9771.1-2008
|
Single-mode optical fibres for telecommunication -- Part 1: Characteristics of a dispersion unshifted single-mode optical fibre
|
|
GB/T 9771.2-2008
|
Single-mode optical fibres for telecommunication -- Part 2: Characteristics of a cut-off wavelength shifted single-mode optical fibre
|
|
GB/T 9771.3-2008
|
Single-mode optical fibres for telecommunication -- Part 3: Characteristics of an extended wavelength band dispersion unshifted single-mode optical fibre
|
|
GB/T 9771.4-2008
|
Single-mode optical fibres for telecommunication -- Part 4: Characteristics of a dispersion-shifted single-mode optical fibre
|
|
GB/T 9771.5-2008
|
Single-mode optical fibres for telecommunication -- Part 5: Characteristics of a non-zero dispersion shifted single-mode optical fibre
|
|
GB/T 9771.6-2008
|
Single-mode optical fibres for telecommunication -- Part 6: Characteristics of a fibre with non-zero dispersion for wideband optical transport
|
|
GB/T 16850.4-2006
|
Basic specification for optical fibre amplifier test methods -- Part 4: Test methods for analogue parameters -- Gain slope
|
|
GB/T 20184-2006
|
Technical condition for Raman Fiber Amplifier
|
|
GB/T 20185-2006
|
Optical interface requirements for equipment and systems relating to the synchronous digital hierarchy
|
|
GB/T 20186.1-2006
|
Secondary coating materials used for optical fiber -- Part 1: Polybutylene terephthalate
|