|
US$489.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 15972.47-2021: Specifications for optical fibre test method - Part 47: Measurement methods and test procedures for transmission characteristics - Macrobending loss
Status: Valid GB/T 15972.47: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 15972.47-2021 | English | 489 |
Add to Cart
|
5 days [Need to translate]
|
Specifications for optical fibre test method - Part 47: Measurement methods and test procedures for transmission characteristics - Macrobending loss
| Valid |
GB/T 15972.47-2021
|
| GB/T 15972.47-2008 | English | 279 |
Add to Cart
|
3 days [Need to translate]
|
Specifications for optical fibre test methods -- Part 47: Measurement methods and test procedures for transmission and optical characteristics -- Macro-bending loss
| Obsolete |
GB/T 15972.47-2008
|
PDF similar to GB/T 15972.47-2021
Basic data | Standard ID | GB/T 15972.47-2021 (GB/T15972.47-2021) | | Description (Translated English) | Specifications for optical fibre test method - Part 47: Measurement methods and test procedures for transmission characteristics - Macrobending loss | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | M33 | | Word Count Estimation | 26,227 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 15972.47-2021: Specifications for optical fibre test method - Part 47: Measurement methods and test procedures for transmission characteristics - Macrobending loss
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Specifications for optical fibre test method-Part 47.Measurement methods and test procedures for transmission characteristics-Macrobending loss
ICS 33.180.10
M33
National Standards of People's Republic of China
Replace GB/T 15972.47-2008
Optical fiber test method specification. Part 47.Transmission characteristics
Measurement method and test procedure Macrobending loss
(IEC 60793-1-47.2017,Opticalfibres-Part 1-47.Measurement
Released on 2021-05-21
2021-12-01 implementation
State Administration of Market Supervision and Administration
Issued by the National Standardization Management Committee
Table of contents
Foreword Ⅰ
1 Scope 1
2 Normative references 1
3 Terms and definitions 1
4 Method overview 1
5 Device 2
6 Samples and sample preparation 6
7 Procedure 6
8 Calculation 9
9 Results 9
Appendix A (informative appendix) Structural changes of this part compared with IEC 60793-1-47.2017 11
Appendix B (Normative Appendix) Requirements for the characteristics of the light source for the measurement of A1 type multimode fiber 13
Appendix C (informative appendix) Small bending radius phenomenon 16
Appendix D (informative appendix) Approximate measurement of macrobending loss by parallel plate (two-point bending) method 19
Reference 23
Foreword
The plan of GB/T 15972 "Specifications for Optical Fiber Test Methods" consists of the following parts.
---Part 10~Part 19.General principles of measurement methods and test procedures;
---Part 20~Part 29.Measurement methods and test procedures of dimensional parameters;
---Part 30~Part 39.Measurement methods and test procedures of mechanical properties;
---Part 40~Part 49.Measurement methods and test procedures for transmission characteristics;
--- Part 50 ~ Part 59.Environmental performance measurement methods and test procedures.
Among them, GB/T 15972.4× consists of the following parts.
---Part 40.Measurement methods and test procedures for transmission characteristics attenuation;
---Part 41.Measurement methods of transmission characteristics and test procedure bandwidth;
---Part 42.Measurement methods and test procedures for transmission characteristics. Wavelength dispersion;
---Part 43.Measurement methods of transmission characteristics and test procedures numerical aperture;
---Part 44.Measurement methods of transmission characteristics and test procedures cut-off wavelength;
---Part 45.Measurement methods and test procedures for transmission characteristics; Mode field diameter;
---Part 46.Transmission characteristics measurement methods and test procedures light transmittance changes;
---Part 47.Measurement methods and test procedures for transmission characteristics, macrobending loss;
---Part 48.Measurement methods and test procedures for transmission characteristics Polarization mode dispersion;
---Part 49.Differential modulus delay for measurement methods and test procedures of transmission characteristics.
This part is Part 47 of GB/T 15972.
This section was drafted in accordance with the rules given in GB/T 1.1-2009.
This part replaces GB/T 15972.47-2008 "Specification for optical fiber test methods Part 47.Measurement of transmission characteristics and optical characteristics
Methods and Test Procedures for Macro-bending Loss. Compared with GB/T 15972.47-2008, the main technical changes in this part are as follows.
---Modified the measurement methods of class B single-mode fiber and class A1 multi-mode fiber, and changed the original method A---transmission power monitoring method to the original method.
Method B-truncation method, modified to method A-fiber winding method (see Chapter 4, 5.1, 6.1.1 and 7.1, Chapter 5 of the.2008 edition);
---Added method B---quarter circle bending method (applicable to A3 and A4 multimode fibers) (see Chapter 4, 5.2, 6.1.2 and
7.2);
---The calculation formula of macrobending loss has been added (see Chapter 8);
---Revised the provisions of the results (see Chapter 9, Chapter 7 of the.2008 edition);
---The light source characteristic requirement for A1 multimode fiber measurement has been added (see Appendix B).
This part uses the redrafting method to modify and adopt IEC 60793-1-47.2017 ``Optical Fiber Part 1-47.Measurement Methods and Test Procedures
Macro bending loss.
Compared with IEC 60793-1-47.2017, this part has many structural adjustments. Appendix A lists this part and IEC 60793-
1-47.2017 chapter number comparison list.
The technical differences between this part and IEC 60793-1-47.2017 and the reasons are as follows.
---Regarding normative reference documents, this section has made adjustments with technical differences to adapt to my country's technical conditions and adjustments.
The situation is collectively reflected in Chapter 2 "Normative Reference Documents", with specific adjustments as follows.
● Replace IEC 60793-2-10 with non-equivalent adopting international standard GB/T 12357.1 (see 5.1, 6.1.1 and 7.1.3);
● Deleted IEC 60793-1 (all parts), IEC 60793-1-1.2017 and IEC 60793-2;
● Added reference to GB/T 9771 (all parts) (see 5.1, 6.1.1 and 7.1.2);
● Added reference to GB/T 12357.3 and GB/T 12357.4 (see 5.2);
● Added reference to GB/T 14733.12 (see Chapter 3);
● Added references to GB/T 15972.40-2008 and GB/T 15972.46-2008 (see Chapter 4, Chapter 5 and Chapter 7
chapter).
--- Amend the title of Chapter 6 "Sample" to "Sample and Sample Preparation";
--- Modify the bending radius range required by the access network operating conditions in 7.1.2 from "7.5mm to 15mm" to "5mm to
15mm";
--- Deleted Appendix A and Appendix B in the original text of the international standard, and used Chapter 4, Chapter 5 and Chapter 7 as references respectively
GB/T 15972.40-2008 Appendix A and GB/T 15972.46-2008 Appendix A replaced;
--- Delete the requirements for the injection device of the A2 multimode fiber in 5.3.2.4;
---Correct "2.5838" in Figure B.1 to "0.5838".
This section has made the following editorial changes.
--- Modify the standard name to "Specifications for Optical Fiber Test Methods Part 47.Measurement Methods and Test Procedures for Transmission Characteristics
loss";
---In accordance with the requirements of GB/T 1.1-2009, the chapter of scope is standardized;
--- Correct the formula (C.1) "γ=Aαλ" to "γAeαλ";
--- Correct the formula (C.2) "ln[γ]=αλ×lnA" to "ln[γ]=αλ lnA".
Please note that some of the contents of this document may involve patents. The issuing agency of this document is not responsible for identifying these patents.
This part is proposed and managed by the Ministry of Industry and Information Technology (Communications) of the People's Republic of China.
Drafting organizations of this section. China Information and Communication Technology Group Co., Ltd., YOFC Co., Ltd., Jiangsu Zhongtian Technology Co., Ltd.
Co., Ltd., Tongding Internet Information Co., Ltd., Jiangsu Hengtong Optoelectronics Co., Ltd., and Tenchi (Nanjing) Optical Fiber Co., Ltd.
The main drafters of this section. Liu Cheng, Zhou Huizhi, Li Jing, Wang Dongxiang, Ning Siping, Lei Fei, Cao Shanshan, Du Kun, Jiang Xihua, Huang Zhengqun,
Wang Xiaoquan.
The previous releases of the standards replaced by this part are as follows.
---GB/T 15972.47-2008.
Optical fiber test method specification. Part 47.Transmission characteristics
Measurement method and test procedure Macrobending loss
1 Scope
This part of GB/T 15972 specifies an overview of the method of measuring optical fiber macrobending loss, equipment, sample and sample preparation, procedures, calculations and
The technical requirements of the result.
This part is suitable for measuring the macrobending loss of type B single-mode fiber at 1550nm or 1625nm wavelength.
Macrobending loss at 850nm or 1300nm wavelength, and A3 and A4 multimode fiber at 650nm, 850nm or 1300nm wave
Long macrobending loss.
2 Normative references
The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this article
Pieces. For undated reference documents, the latest version (including all amendments) is applicable to this document.
GB/T 9771 (all parts) Single-mode optical fiber for communication
GB/T 12357.1 Multimode Optical Fiber for Communication Part 1.Characteristics of Type A1 Multimode Optical Fiber (GB/T 12357.1-2015,
IEC 60793-2-10.2011, NEQ)
GB/T 12357.3 Multimode Optical Fiber for Communication Part 3.Characteristics of Type A3 Multimode Optical Fiber (GB/T 12357.3-2004,
IEC 60793-2-30..2002, MOD)
GB/T 12357.4 Multimode Optical Fiber for Communication Part 4.Characteristics of Type A4 Multimode Optical Fiber (GB/T 12357.4-2016,
IEC 60793-2-40.2009, NEQ)
GB/T 14733.12 Telecommunications Terminology Optical Fiber Communication (GB/T 14733.12-2008, IEC 60050(731)..1991, IDT)
GB/T 15972.40-2008 Optical fiber test method specification Part 40.Transmission characteristics and optical characteristics measurement methods and tests
Program attenuation (IEC 60793-1-40.2001, MOD)
GB/T 15972.46-2008 Optical fiber test method specification Part 46.Transmission characteristics and optical characteristics measurement methods and tests
Program light transmittance change (IEC 60793-1-46.2001, MOD)
IEC 61280-1-4 Fiber Optic Communication Subsystem Test Procedure Part 1-4.General Communication Subsystem Light Source Encircled Flux Test
Method (Fibre-opticcommunicationsubsystemtestprocedures-Part 1-4.Generalcommunicationsubsys-
tems-Lightsourceencircledfluxmeasurementmethod)
IEC 61280-4-1 Fiber Optic Communication Subsystem Test Procedure Part 4-1.Multimode Attenuation Measurement for Installed Optical Cable Facilities
(Fibre-opticcommunicationsubsystemtestprocedures-Part 4-1.Instaledcableplant- Multimode
attenuationmeasurement)
3 Terms and definitions
The terms and definitions defined in GB/T 14733.12 apply to this document.
4 Method overview
There are two methods to test the macrobending loss of optical fiber.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 15972.47-2021_English be delivered?Answer: Upon your order, we will start to translate GB/T 15972.47-2021_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 15972.47-2021_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 15972.47-2021_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 15972.47-2021?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 15972.47-2021 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|