|
US$379.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 9771.7-2022: Single-mode optical fibres for telecommunication - Part 7: Characteristics of a bending loss insensitive single-mode optical fibre
Status: Valid GB/T 9771.7: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 9771.7-2022 | English | 379 |
Add to Cart
|
4 days [Need to translate]
|
Single-mode optical fibres for telecommunication - Part 7: Characteristics of a bending loss insensitive single-mode optical fibre
| Valid |
GB/T 9771.7-2022
|
| GB/T 9771.7-2012 | English | 439 |
Add to Cart
|
3 days [Need to translate]
|
Single-mode optical fibres for telecommunication -- Part 7: Characteristics of a bending loss insensitive single-mode optical fibre for the access network
| Obsolete |
GB/T 9771.7-2012
|
PDF similar to GB/T 9771.7-2022
Basic data | Standard ID | GB/T 9771.7-2022 (GB/T9771.7-2022) | | Description (Translated English) | Single-mode optical fibres for telecommunication - Part 7: Characteristics of a bending loss insensitive single-mode optical fibre | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | M33 | | Classification of International Standard | 33.180.10 | | Word Count Estimation | 18,141 | | Date of Issue | 2022-10-12 | | Date of Implementation | 2023-05-01 | | Older Standard (superseded by this standard) | GB/T 9771.7-2012 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 9771.7-2022: Single-mode optical fibres for telecommunication - Part 7: Characteristics of a bending loss insensitive single-mode optical fibre
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Single-mode optical fibers for telecommunications - Part 7.Characteristics of a bending loss insensitive single-mode optical fiber
ICS 33.180.10
CCSM33
National Standards of People's Republic of China
Replace GB/T 9771.7-2012
Single-mode optical fiber for communication - Part 7.
Bending Loss Insensitive Single Mode Fiber Characteristics
Released on 2022-10-12
2023-05-01 implementation
State Administration for Market Regulation
Released by the National Standardization Management Committee
table of contents
Preface III
Introduction V
1 Scope 1
2 Normative references 1
3 Terms and Definitions 1
4 Abbreviations 1
5 categories 1
6 Rounding up rules 2
7 request 2
7.1 Dimensional parameters 2
7.2 Transfer characteristics 3
7.3 Mechanical properties 7
7.4 Environmental performance 8
Appendix A (informative) Correspondence between GB/T 9771 and IEC and ITU-T standards for single-mode fiber codes 10
Reference 11
foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules for Standardization Documents"
drafting.
This document is part 7 of GB/T 9771 "Single-mode Optical Fiber for Communication". GB/T 9771 has issued the following parts.
--- Part 1.Non-dispersion-shifted single-mode fiber characteristics;
--- Part 2.Cutoff wavelength shifted single-mode fiber characteristics;
--- Part 3.Characteristics of non-dispersion-shifted single-mode fiber with extended wavelength range;
--- Part 4.Dispersion-shifted single-mode fiber characteristics;
--- Part 5.Non-zero dispersion shifted single-mode fiber characteristics;
--- Part 6.Characteristics of non-zero dispersion single-mode fiber for wide-wavelength optical transmission;
--- Part 7.Bending loss insensitive single-mode fiber characteristics.
This document replaces GB/T 9771.7-2012 "Single-mode optical fibers for communications - Part 7.Bending loss-insensitive single-mode optical fibers for access networks
Compared with GB/T 9771.7-2012, except for structural adjustment and editorial changes, the main technical changes are as follows.
---Changed the scope of application of the standard, and deleted the limitation of "for access network" in the application scenario of optical fiber cable (see Chapter 1);
--- Change the applicable range of wavelengths of B6b2 and B6b3 fibers from three separate wavelengths of 1310nm, 1550nm and 1625nm
Change to apply to O, E, S, C and L entire band (1260nm~1625nm) (see Chapter 5, Chapter 5 of the.2012 edition
chapter);
--- Added amendment rules (see Chapter 6);
--- Added the size parameter requirements for optical fibers with a coating diameter specification of.200 μm (see 7.1.1);
--- Change optical characteristics and transmission characteristics to transmission characteristics (see 7.2, 6.2 of the.2012 edition);
--- Changed the attenuation coefficient requirements of B6b2 and B6b3, added footnotes 1310nm~1625nm, 1530nm~
Requirements for the maximum value of the attenuation coefficient at 1565nm (see 7.2.3, 6.2.3 of the.2012 edition);
--- Increased the calculation formula of the dispersion coefficient limit, changed the zero dispersion slope range of B6a1 and B6a2, increased 1550nm,
For the range of 1625nm dispersion coefficient, the requirements for dispersion characteristics of B6b2 and B6b3 are added (see 7.2.4, 6.2.4 of the.2012 edition);
--- Changed the requirements for the mode field diameter (see 7.2.5, 6.1.1 of the.2012 edition);
--- Increased attenuation wavelength characteristics and attenuation uniformity requirements (see 7.2.7, 7.2.8);
---Changed the tension value corresponding to the screening stress (see 7.3.1, 6.3.1 of the.2012 edition);
--- Changed the tensile strength requirements, deleted the tensile strength requirements for gauge lengths of 1m, 10m, and 20m (see 7.3.2,.2012 edition
6.3.2);
--- Added the peeling force requirements for the optical fiber coating with a coating diameter of.200 μm (see 7.3.4, 7.4.3);
--- Increased environmental test 1625nm wavelength light attenuation requirements (see 7.4.2).
Please note that some contents of this document may refer to patents. The issuing agency of this document assumes no responsibility for identifying patents.
This document is proposed by the Ministry of Industry and Information Technology of the People's Republic of China.
This document is under the jurisdiction of the National Communications Standardization Technical Committee (SAC/TC485).
This document is drafted by. Changfei Optical Fiber and Cable Co., Ltd., China Information and Communication Technology Group Co., Ltd., Chengdu Tairui Communication Equipment Co., Ltd.
Equipment Testing Co., Ltd., Beijing University of Posts and Telecommunications, China Academy of Information and Communications Technology, Jiangsu Zhongtian Technology Co., Ltd., Chengdu Kangning Optical Cable Co., Ltd.
Company, Wuhan Ritefulian Technology Co., Ltd., Jiangsu Hengtong Optical Fiber Technology Co., Ltd., Hongan Group Co., Ltd.
The main drafters of this document. Li Jing, Liu Cheng, Gan Lu, Li Linying, Li Chunsheng, Liu Tai, Yang Shixin, Xu Jiangbo, Han Qingrong, Li Tingting,
Cao Shanshan, Chen Wei, Chen Weidong.
The release status of previous versions of this document and the documents it replaces are as follows.
---First published as GB/T 9771.7-2012 in.2012;
--- This is the first revision.
Introduction
According to the current classification of single-mode optical fibers at home and abroad, GB/T 9771 "Single-mode Optical Fiber for Communication" is divided into the following parts.
--- Part 1.Non-dispersion-shifted single-mode fiber characteristics;
--- Part 2.Cutoff wavelength shifted single-mode fiber characteristics;
--- Part 3.Characteristics of non-dispersion-shifted single-mode fiber with extended wavelength range;
--- Part 4.Dispersion-shifted single-mode fiber characteristics;
--- Part 5.Non-zero dispersion shifted single-mode fiber characteristics;
--- Part 6.Characteristics of non-zero dispersion single-mode fiber for wide-wavelength optical transmission;
--- Part 7.Bending loss insensitive single-mode fiber characteristics.
Combining the requirements of system design and the development of related devices, bending loss insensitive single-mode fiber is suitable for
Dense wiring in indoor narrow environment can give full play to the advantages of high bandwidth and low attenuation of single-mode fiber. With the continuous promotion of FTTx
Furthermore, bending loss insensitive single-mode fiber has been widely used at home and abroad. The geometrical, optical and transmission characteristic parameters of optical fibers in this document
Tested the provisions of G.657.A1, G.657.A2, G.657.B2 and G.657.B3 optical fiber characteristics in ITU-TG.657.2016, the mechanical
The mechanical and environmental performance refers to the provisions of B6 optical fiber in IEC 60793-2-50.2018.
Single-mode optical fiber for communication - Part 7.
Bending Loss Insensitive Single Mode Fiber Characteristics
1 Scope
This document specifies the bending loss insensitive single-mode optical fiber used in communication optical cables and other information transmission equipment (hereinafter referred to as B6 type)
Requirements such as size parameters, transmission characteristics, mechanical properties and environmental performance of single-mode optical fiber), describe the corresponding test methods and numerical rounding off
rule.
This document applies to the design, development, production and testing of B6 single-mode optical fibers.
2 Normative references
The contents of the following documents constitute the essential provisions of this document through normative references in the text. Among them, dated references
For documents, only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to
this document.
GB/T 8170 Numerical rounding off rules and expression and determination of limit values
GB/T 15972 (all parts) Specifications for optical fiber test methods
YD/T 1065.2-2015 Test Method for Polarization Mode Dispersion of Single Mode Optical Fiber Part 2.Link Polarization Mode Dispersion Coefficient (PMDQ)
The statistical calculation method of
ITU-TG.650.1.2020 Parameter definitions and test methods for single-mode optical fiber cables with linear and deterministic characteristics (Definitions
ITU-TG.650.2.2015 Parameter definitions and test methods for single-mode optical fiber cables with statistical and nonlinear characteristics (Definitions
3 Terms and Definitions
The terms and definitions defined in GB/T 15972 (all parts), ITU-TG.650.1.2020, ITU-TG.650.2.2015 apply to this
document.
4 Abbreviations
The following abbreviations apply to this document.
FWM. Four Wave Mixing (FourWaveMixing)
5 categories
Type B6 single-mode fiber is divided into four subcategories. B6a1, B6a2, B6b2 and B6b3.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 9771.7-2022_English be delivered?Answer: Upon your order, we will start to translate GB/T 9771.7-2022_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 9771.7-2022_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 9771.7-2022_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 9771.7-2022?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 9771.7-2022 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|