|
US$589.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 15972.49-2021: Specifications for optical fibre test methods - Part 49: Measurement methods and test procedures for transmission characteristics - Differential mode delay
Status: Valid GB/T 15972.49: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 15972.49-2021 | English | 589 |
Add to Cart
|
5 days [Need to translate]
|
Specifications for optical fibre test methods - Part 49: Measurement methods and test procedures for transmission characteristics - Differential mode delay
| Valid |
GB/T 15972.49-2021
|
| GB/T 15972.49-2008 | English | 559 |
Add to Cart
|
3 days [Need to translate]
|
Specifications for optical fibre test methods -- Part 49: Measurement methods and test procedures for transmission and optical characteristics -- Differential mode delay
| Obsolete |
GB/T 15972.49-2008
|
PDF similar to GB/T 15972.49-2021
Basic data | Standard ID | GB/T 15972.49-2021 (GB/T15972.49-2021) | | Description (Translated English) | Specifications for optical fibre test methods - Part 49: Measurement methods and test procedures for transmission characteristics - Differential mode delay | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | M33 | | Word Count Estimation | 32,340 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 15972.49-2021: Specifications for optical fibre test methods - Part 49: Measurement methods and test procedures for transmission characteristics - Differential mode delay
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Specifications for optical fibre test methods - Part 49.Measurement methods and test procedures for transmission characteristics - Differential mode delay
ICS 33.180.10
M 33
National Standards of People's Republic of China
Replace GB/T 15972.49-2008
Optical fiber test method specification part 49.
Transmission characteristics measurement methods and test procedures
Differential modular delay
(IEC 60793-1-49.2018, Opticalfibres-Part 1-49.Measurement
Released on 2021-10-11 and implemented on 2022-05-01
State Administration for Market Regulation
Issued by the National Standardization Management Committee
Table of contents
Foreword Ⅲ
1 Scope 1
2 Normative references 1
3 Terms and definitions 1
4 Abbreviations 2
5 Method overview 2
6 Device 3
6.1 Overview 3
6.2 Light source 3
6.3 Scanning pigtail 4
6.4 Scanning table 4
6.5 Coupling of scanning pigtail and fiber under test 4
6.6 Stripping of the cladding mold 4
6.7 Detection system 4
6.8 Sampling and data processing 5
6.9 Computing device 5
6.10 System performance 5
7 Sampling and samples 6
7.1 Sample 6
7.2 Sample end face 6
7.3 Sample length 6
7.4 Sample placement 6
7.5 Sample positioning 6
8 Procedure 7
8.1 Fiber coupling and system setup 7
8.2 Determination of the optical center of the fiber 7
8.3 Sample test 7
8.4 Determination of ΔTPULSE and ΔTREF 7
8.5 Benchmark test method 7
9 Calculation and explanation of results 8
9.1 Overview 8
9.2 Differential Modular Delay (DMD) 8
9.3 Minimum calculated effective mode bandwidth (minEMBc) 9
9.4 Length normalization 10
10 Results 10
10.1 Information to be reported 10
10.2 Information to be provided when needed 11
Appendix A (Normative Appendix) Light source spectrum width limit 12
Appendix B (informative appendix) Determination of fiber optics center 15
Appendix C (Normative appendix) Measurement of detection system mode 17
Appendix D (informative appendix) Measurement discussion 19
Appendix E (informative appendix) Determining the DMD weight when calculating EMBc 22
Appendix F (informative appendix) Calculation of EMBc 24
Reference 27
Foreword
GB/T 15972 "Specifications for Optical Fiber Test Methods" consists of several parts, and its structure is as follows.
---Part 10.General principles of measurement methods and test procedures;
---Part 20~Part 29.Measurement methods and test procedures of dimensional parameters;
---Part 30~Part 39.Measurement methods and test procedures of mechanical properties;
---Part 40~Part 49.Measurement methods and test procedures for transmission characteristics;
---Part 50~Part 59.Environmental performance measurement methods and test procedures.
Among them, GB/T 15972.4× consists of the following parts.
---Part 40.Measurement methods and test procedures for transmission characteristics attenuation;
---Part 41.Measurement methods of transmission characteristics and test procedure bandwidth;
---Part 42.Measurement methods and test procedures for transmission characteristics. Wavelength dispersion;
---Part 43.Measurement methods of transmission characteristics and test procedures Numerical aperture;
---Part 44.Measurement methods of transmission characteristics and test procedures cut-off wavelength;
---Part 45.Measurement methods and test procedures for transmission characteristics; Mode field diameter;
---Part 46.Measurement methods of transmission characteristics and test procedures for light transmittance changes;
---Part 47.Measurement methods and test procedures for transmission characteristics, macrobending loss;
---Part 48.Measurement methods and test procedures for transmission characteristics Polarization mode dispersion;
---Part 49.Differential modulus delay for measurement methods and test procedures of transmission characteristics.
This part is part 49 of GB/T 15972.
This part was drafted in accordance with the rules given in GB/T 1.1-2009.
This part replaces GB/T 15972.49-2008 "Specification for optical fiber test methods-Part 49.Measurement of transmission characteristics and optical characteristics
Methods and Test Procedures Differential Modulus Delay. Compared with GB/T 15972.49-2008, the main technical changes in this part are as follows.
---Added some normative reference documents (see Chapter 2);
---Added the three terms of differential modulus delay, quadrant and 25% full width (see Chapter 3, Chapter 3 of the.2008 edition);
---Added abbreviations (see Chapter 4);
---Added an overview of the exportable parameters minEMBc and OMBc (see Chapter 5);
---Added "pulse semiconductor laser or mode-locked fiber laser" as a light source that can meet the requirements (see 6.2,.2008 edition
5.1);
--- Deleted the high-order mode filtering chapter, adjusted the content to the scan pigtail chapter (see 6.3, 5.3.3 of the.2008 edition);
---Added the requirements of EMBc and OMBc for mode correlation in the detection system (see 6.7, 5.4.1 of the.2008 edition);
---Added system performance requirements (see 6.10);
---Added deconvolution and pulse overlap (see 9.2.2, 9.2.3);
---Modified the process of DMD determination (see 9.2.4, 8.1 in.2008 edition);
---Added the calculation and result description of the minimum calculation effective mode bandwidth (see 9.3);
---Added informative Appendix B. Determination of Fiber Optics Center (see Appendix B);
--- Added normative appendix C. mode measurement of the detection system (see appendix C);
---Adjust Appendix B of the.2008 edition to Appendix D of this document (see Appendix D, Appendix B of the.2008 edition);
---Added Appendix E to determine the DMD weight when calculating EMBC (see Appendix E);
---The calculation of EMBC in Appendix F has been added (see Appendix F);
--- Added the structural changes in this part of Appendix G compared with IEC 60793-1-49.2018 (see Appendix G).
This part uses the redrafting method to modify and adopt IEC 60793-1-49.2018 ``Optical Fiber Part 1-49.Measurement Methods and Test Procedures
Differential Modular Delay."
Compared with IEC 60793-1-49.2018, this part has structural adjustments. The specific adjustments are as follows.
--- Due to the addition of Chapter 4 and the change of part of Chapter 1 to Chapter 5, the number of subsequent chapters has been postponed;
--- Chapter 8 and Chapter 9 of International Standards are merged into Chapter 10 of this Part.
The technical differences between this part and IEC 60793-1-49.2018 and the reasons are as follows.
---Regarding normative reference documents, this section has made adjustments with technical differences to adapt to my country's technical conditions and adjustments
It is collectively reflected in Chapter 2 "Normative Reference Documents", and the specific adjustments are as follows.
● Replace IEC 60793-1-22 with GB/T 15972.22 modified to adopt international standards;
● Replace IEC 60793-1-41 with GB/T 15972.41 modified to adopt international standards;
● Added reference to GB/T 14733.12;
● Removed IEC 60793-1-1.2017, IEC 60793-1-45, IEC 60825-1 and IEC 60825-2.
---Added the reference standard in the chapter on terms and definitions;
--- The terms MFD and benchmark test method have been deleted, and the inner limit of the radial scan position, the outer limit of the radial scan position, and the calculated
Three terms of effective mode bandwidth;
---Added a chapter on acronyms;
---Change the description of light source safety in the IEC document from the main text to the note;
--- Modify the injection fiber (launchfibre) in Figure 1 to scan pigtail (probefibre); modify the formula (A.2) in the IEC file
mistake;
--- Split formula (8) into formula (8) and formula (9), and the subsequent formula numbers are extended;
---Revised the title of Table A.1 in Appendix A, and revised "Worst Dispersion" to "Maximum Expected Color of Commercial Type A1 Multimode Fiber
Scattered".
This section has made the following editorial changes.
---In order to be consistent with my country's technical standard system, the standard name of this part is changed to "Optical Fiber Test Method Specification Part 49.Transmission Characteristics
Differential modulus delay of the measurement method and test procedure of the characteristic";
---Adjusted references.
Please note that some of the contents of this document may involve patents. The issuing agency of this document is not responsible for identifying these patents.
This part was proposed by the Ministry of Industry and Information Technology of the People's Republic of China.
This part is under the jurisdiction of the National Communication Standardization Technical Committee (SAC/TC485).
Drafting organizations of this section. China Information and Communication Technology Group Co., Ltd., Chengdu Corning Optical Cable Co., Ltd.
The main drafters of this section. Liu Cheng, Wang Dongxiang, Yang Shixin, Hu Guyue, Yu Huang, Qi Qingqing, Zhang Yichi, Xu Jiangbo, Du Cheng, Zhou Huizhi.
The previous releases of the standards replaced by this part are as follows.
---GB/T 15972.49-2008.
Optical fiber test method specification part 49.
Transmission characteristics measurement methods and test procedures
Differential modular delay
1 Scope
This part of GB/T 15972 describes the test method of optical fiber differential mode delay, and establishes the test equipment, injection conditions, procedures, and calculations.
Uniform requirements for calculation methods and results.
This part is applicable to the measurement of differential mode delay of A1 graded index multimode fiber.
The test methods determined in this section are generally used in indoor environments and are not suitable for operation in the field.
Note. Gigabit Ethernet system uses laser as light source. When this system uses type A1 multimode fiber as the transmission medium, the measurement result of differential mode delay is
To evaluate the bandwidth performance of multimode fiber under this application condition.
2 Normative references
The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this article
Pieces. For undated reference documents, the latest version (including all amendments) is applicable to this document.
GB/T 14733.12 Telecom terminology optical fiber communication [GB/T 14733.12-2008, IEC 60050(731).2008, IDT]
GB/T 15972.22 Optical fiber test method specification Part 22.Dimension parameter measurement method and test procedure length
(GB/T 15972.22-2008, IEC 60793-1-22.2001, MOD)
GB/T 15972.41 Optical fiber test method specification Part 41.Transmission characteristics and optical characteristics measurement methods and test procedures
Wide (GB/T 15972.41-2021, IEC 60793-1-41.2010, MOD)
IEC 61280-1-4 Optical Fiber Communication Subsystem Test Procedure Part 1-4.General Communication Subsystem Light Source Encircled Flux Test Method
(Fibreopticcommunicationsubsystemtestprocedures-Part 1-4.Generalcommunicationsubsys-
tems-Lightsourceencircledfluxmeasurementmethod)
3 Terms and definitions
The following terms and definitions defined in GB/T 14733.12 apply to this document.
3.1
Radial scan position inner limit
RINNER
The inner limit of the radial offset position when the scanning pigtail is scanned radially on the end face of the fiber under test.
3.2
Outer limit of radial scan position
ROUTER
The outer limit of the radial offset position when the scanning pigtail is scanned radially on the end face of the tested fiber.
3.3
Differential mode delay; DMD
Between the fastest and slowest modes excited at all radial offset positions between RINNER and ROUTER (including RINNER and ROUTER)
Estimated difference in optical pulse delay.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 15972.49-2021_English be delivered?Answer: Upon your order, we will start to translate GB/T 15972.49-2021_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 15972.49-2021_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 15972.49-2021_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 15972.49-2021?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 15972.49-2021 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|