|
Std ID |
Description (Standard Title) |
|
GB/T 39862-2021
|
Test method for thermal conductivity of high thermal conductivity ceramics
|
|
GB/T 39974-2021
|
Magnesium partially stabilized zirconia ceramic element for oxygen measurement in molten steel
|
|
GB/T 40005-2021
|
Weibull statistics for strength data of fine ceramics
|
|
GB/T 16399-2021
|
Methods for chemical analysis of clay
|
|
GB/T 39232-2020
|
Zirconia ceramics knife
|
|
GB/T 39685-2020
|
Test method for determining bonding strength of ceramic coatings
|
|
GB/T 39686-2020
|
Test method for determining elastic modulus and strength of thick ceramic coatings
|
|
GB/T 39687-2020
|
Testing method for drying loss of fine ceramic powders
|
|
GB/T 39688-2020
|
Test method for determining density of ceramic coatings
|
|
GB/T 39713-2020
|
Testing mothed for specific surface area of ceramic powders - BET gas adsorption operation
|
|
GB/T 39716-2020
|
Test method for air-purification performance of photocatalytic materials and products - Removal of nitric oxide
|
|
GB/T 39717-2020
|
Ceramic flat membrane for water treatment
|
|
GB/T 36402-2018
|
Thermal analysis-mass spectrometry coupling method for ceramics materials
|
|
GB/T 37246-2018
|
Test method for thermal-shock resistance of fine ceramics
|
|
GB/T 37247-2018
|
Test method for evaluating antifungal activity of photocatalytic materials and products
|
|
GB/T 37250-2018
|
Test method for response time of functional ceramics for oxygen sensor
|
|
GB/T 37251-2018
|
Cordierite-based ceramic high temperature gas filter elements
|
|
GB/T 37252-2018
|
Zirconia ceramics element for planar oxygen sensor
|
|
GB/T 37253-2018
|
Test method for ionic conductivity of functional ceramics for oxygen sensor
|
|
GB/T 37258-2018
|
Silicon nitride ceramic powder
|
|
GB/T 32978-2016
|
Silicon carbide filter element for high temperature
|
|
GB/T 31541-2015
|
Test method for interfacial bond strength of fine ceramic materials -- Cross-bonded
|
|
GB/T 31703-2015
|
Ceramic ball bearings -- Silicon nitride balls
|
|
GB/T 30706-2014
|
Measurement method and evaluating of the antibacterial characteristics of photocatalysis materials under visible light irradiation
|
|
GB/T 30707-2014
|
Testing method on adhesion of fine ceramic coatings -- Scratching
|
|
GB/T 30809-2014
|
UV light sources for testing properties of photocatalytic materials
|
|
GB/T 27979-2011
|
Alumina Ceramic Wear-Resistant Composite Lining Board
|
|
GB/T 16537-2010
|
Chemical analysis methods of fritted glaze for ceramics
|
|
GB/T 25994-2010
|
Honeycomb ceramics
|
|
GB/T 25995-2010
|
Test methods for density and apparent porosity of fine ceramics
|
|
GB/T 25999-2010
|
Ceramic liner with steel sleeve for mud pump
|
|
GB/T 16534-2009
|
Fine ceramics (advanced ceramics, advanced technical ceramics) -- Test method for hardness of monolithic ceramics at room temperature
|
|
GB/T 17991-2009
|
Fine ceramics (advanced ceramics, advanced technical ceramics) -- Vocabulary
|
|
GB/T 23805-2009
|
Strength of fine ceramics room temperature tensile test method
|
|
GB/T 23806-2009
|
Fine ceramics (advanced ceramics, advanced technical ceramics) -- Test method for fracture toughness of monolithic ceramics at room temperature by single edge pre-cracked beam (SEPB) method
|
|
GB/T 23807-2009
|
Fine ceramics (advanced ceramics, advanced technical ceramics) -- Classification system
|
|
GB/T 14390-2008
|
Fine ceramics (advanced ceramics, advanced technical ceramics) -- Test method for flexural strength of monolithic ceramics at elevated temperature
|
|
GB/T 16535-2008
|
Fine ceramics (advanced ceramics, advanced technical ceramics) -- Test method for linear thermal expansion of monolithic ceramics by push-rod technique
|
|
GB/T 8488-2008
|
Acid resisting bricks and tiles
|
|
GB/T 20117-2006
|
Fine ceramics (advanced ceramics, advanced technical ceramics) -- Sample preparation for the determination of particle size distribution of ceramic powders
|
|
GB/T 10700-2006
|
Test methods for elastic moduli of fine ceramics (advanced ceramics, advanced technical ceramics) -- Bending method
|
|
GB/T 6569-2006
|
Fine ceramics (advanced ceramics, advanced technical ceramics) -- Test method for flexural strength of monolithic ceramics at room temperature
|
|
GB/T 8489-2006
|
Test method for compressive strength of fine ceramics (advanced ceramics, advanced technical ceramics)
|
|
GB/T 16533-1996
|
General specification for porous ceramic products
|
|
GB/T 16534-1996
|
Test method for Vickers hardness of high performance ceramics
|
|
GB/T 16535-1996
|
Test method for linear thermal expansion of high performance ceramics
|
|
GB/T 16536-1996
|
Test method for thermal shock resistance of high performance ceramics
|
|
GB/T 16537-1996
|
Chemical analyzing methods of fritted glaze for ceramics
|
|
GB/T 1964-1996
|
Test method for crushing strength of porous ceramic
|
|
GB/T 1965-1996
|
Test method for cross-bending strength of porous ceramics
|
|
GB/T 1966-1996
|
Test method for cross-bending strength of porous ceramics
|
|
GB/T 1967-1996
|
Test method for pore diameter of porous ceramic
|
|
GB/T 1969-1996
|
Test method for permeability of porous ceramic
|
|
GB/T 1970-1996
|
Test method for acid and alkaline-resistance of porous ceramic
|
|
GB/T 14389-1993
|
Test method for impact toughness of high performance ceramics
|
|
GB/T 14390-1993
|
Test method for flexural strength of high performance ceramics at elevated temperature
|
|
GB/T 10700-1989
|
Test methods for elastic modulus of high performance ceramics
|
|
GB/T 8489-1987
|
Testing method for compressive (crushing) strength of hing performance ceramics
|
|
GB/T 1968-1980
|
Test method for air permeability ceramics
|
|
GB/T 45774.1-2025
|
Quantitative determination of antibacterial activity of ceramic tile surfaces - Test methods - Part 1: Ceramic tile surfaces with incorporated antibacterial agents
|
|
GB/T 45774.2-2025
|
Quantitative determination of antibacterial activity of ceramic tile surfaces - Test methods - Part 2: Ceramic tille surfaces with incorporated photocatalytic antibacterial agents
|
|
GB/T 45817-2025
|
Quality grade of consumer products - Ceramic tiles
|
|
GB/T 3810.18-2025
|
Test method of ceramic tiles - Part 18: Determination of light reflectance value (LRV)
|
|
GB/T 3810.20-2025
|
Test method of ceramic tiles - Part 20: Determination of deflection of ceramic tiles for calculating their radius of curvature
|
|
GB/T 34549-2024
|
Sanitary ware - Smart toilet
|
|
GB/T 44309-2024
|
Porcelain slab
|
|
GB/T 44460-2024
|
Guidelines for quality grading of consumer products - Sanitary fixtures
|
|
GB/T 42350-2023
|
Fly ash ceramic tiles
|
|
GB/T 12956-2023
|
The requirements for bathroom fixtures
|
|
GB/T 23447-2023
|
Sanitary ware - Shower for bathing
|
|
GB/T 9195-2023
|
Terms and classification of building and sanitary ceramics
|
|
GB/T 41661-2022
|
Tactile paving ceramic tile
|
|
GB/T 41059-2021
|
Adhesives specifications for ceramic tiles
|
|
GB/T 41081-2021
|
Grouts specifications for ceramic tiles
|
|
GB/T 41156-2021
|
Low modulus adhesives for exterior tile finishing
|
|
GB/T 38904-2020
|
Methods for elemental analysis of ceramic liquid pigments
|
|
GB/T 38910-2020
|
Sanitary wares--Test method of the marking
|
|
GB/T 38979-2020
|
Sanitary wares - Test method for flushing noise of toilet
|
|
GB/T 38985-2020
|
The character requirements for ceramic liquid pigments
|
|
GB/T 39156-2020
|
Technical requirements and test methods for large format ceramic slab
|
|
GB/T 37583-2019
|
Sanitary wares - Statistic rules and methods
|
|
GB/T 23448-2019
|
Sanitary ware - Flexible hose
|
|
GB/T 37798-2019
|
Evaluation of slip resistance of ceramic
|
|
GB/T 37214-2018
|
The requirements for external ceramic tiles
|
|
GB/T 37216-2018
|
Sanitary ware -- Deodorizing toilet flushing mechanism
|
|
GB/T 33500-2017
|
External wall insulation foam ceramic
|
|
GB/T 34549-2017
|
Sanitary ware - Smart toilet
|
|
GB/T 35153-2017
|
Slip-resistance ceramic tile
|
|
GB/T 35154-2017
|
Test methods for ceramic tiles grouts
|
|
GB/T 3810.10-2016
|
Test methods of ceramic tiles -- Part 10: Determination of moisture expansion
|
|
GB/T 3810.11-2016
|
The methods of ceramic tiles -- Part 11: Determination of crazing resistance for glazed tiles
|
|
GB/T 3810.1-2016
|
Test methods of ceramic tiles -- Part 1: Sampling and basis for acceptance
|
|
GB/T 3810.12-2016
|
Test methods of ceramic tiles -- Part 12: Determination of frost resistance
|
|
GB/T 3810.13-2016
|
Test methods of ceramic tiles -- Part 13: Determination of chemical resistance
|
|
GB/T 3810.14-2016
|
Test methods of ceramic tiles -- Part 14: Determination of resistance to stains
|
|
GB/T 3810.15-2016
|
Test methods of ceramic tiles -- Part 15: Determination of lead and cadmium given off by glazed tiles
|
|
GB/T 3810.16-2016
|
Test methods of ceramic tiles -- Part 16: Determination of small colour differences
|
|
GB/T 3810.2-2016
|
Test methods of ceramic tiles -- Part 2: Determination of dimensions and surface quality
|
|
GB/T 3810.3-2016
|
Test method of ceramic tiles -- Part 3: Determination of water absorption, apparent porosity, apparent relative density and bulk density
|
|
GB/T 3810.4-2016
|
Test methods of ceramic tiles -- Part 4: Determination of modulus of rupture and breaking strength
|