HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189759 (19 Oct 2025)

GB/T 3810.2-2016 English PDF

US$259.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 3810.2-2016: Test methods of ceramic tiles -- Part 2: Determination of dimensions and surface quality
Status: Valid

GB/T 3810.2: Evolution and historical versions

Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 3810.2-2016English259 Add to Cart 3 days [Need to translate] Test methods of ceramic tiles -- Part 2: Determination of dimensions and surface quality Valid GB/T 3810.2-2016
GB/T 3810.2-2006English439 Add to Cart 3 days [Need to translate] Test methods of ceramic tiles -- Part 2: Determination of dimensions and surface quality Obsolete GB/T 3810.2-2006
GB/T 3810.2-1999English439 Add to Cart 3 days [Need to translate] Test methods of ceramic tiles-- Part 2: Determination of dimensions and surace quality Obsolete GB/T 3810.2-1999

PDF similar to GB/T 3810.2-2016


Standard similar to GB/T 3810.2-2016

GB/T 4100   GB/T 6952   GB 6952   GB/T 3810.1   GB/T 3810.3   GB/T 3810.11   

Basic data

Standard ID GB/T 3810.2-2016 (GB/T3810.2-2016)
Description (Translated English) Test methods of ceramic tiles -- Part 2: Determination of dimensions and surface quality
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard Q31
Classification of International Standard 91.100.25
Word Count Estimation 13,120
Date of Issue 2016-04-25
Date of Implementation 2017-03-01
Older Standard (superseded by this standard) GB/T 3810.2-2006
Adopted Standard ISO 10545-2-1995, MOD
Regulation (derived from) National Standard Announcement No
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary This standard specifies the test methods for the dimensions (length, width, thickness, straightness, straightness, surface flatness) and surface quality of ceramic tiles. Spacer, glaze, and other edge irregularities are negligible when measured in length, width, edge straightness, and straightness, if they are concealed behind a brickwork.

GB/T 3810.2-2016: Test methods of ceramic tiles -- Part 2: Determination of dimensions and surface quality


---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Test methods of ceramic tiles.Part 2. Determination of dimensions and surface quality ICS 91.100.25 Q31 National Standards of People's Republic of China Replace GB/T 3810.2-2006 Test method for ceramic tiles Part 2. inspection of dimensions and surface quality Testmethodsofceramictiles-Part 2. Determination ofdimensionsand surfacequality (ISO 10545-2..1995, Ceramictiles-Part 2. Determination of dimensionsandsurfacequality, MOD) 2016-04-25 released 2017-03-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China China National Standardization Management Committee released

Foreword

GB/T 3810 "ceramic tile test method" is divided into 16 parts. - Part 1. Sampling and receiving conditions; - Part 2. Inspection of dimensions and surface quality; - Part 3. Determination of water absorption, apparent porosity, apparent relative density and bulk density; - Part 4. Determination of fracture modulus and failure strength; - Part 5. Determining the impact resistance of a brick with a recovery factor; - Part 6. Determination of wear depth of unglazed tiles; - Part 7. Determination of abrasion resistance of glazed tiles; - Part 8. Determination of linear thermal expansion; - Part 9. Determination of thermal shock resistance; - Part 10. Determination of wet expansion; - Part 11. Determination of glaze resistance of glazed tiles; - Part 12. Determination of frost resistance; - Part 13. Determination of resistance to chemical corrosion; - Part 14. Determination of resistance to contamination; - Part 15. Determination of lead and cadmium elution of glazed tiles; - Part 16. Determination of small chromatic aberration. This part is part 2 of GB/T 3810. This part is drafted in accordance with the rules given in GB/T 1.1-2009. This part replaces GB/T 3810.2-2006 "Test methods for ceramic tiles Part 2. Inspection of dimensions and surface quality". versus GB/T 3810.2-2006 compared to the main changes are as follows. - modified scope (see Chapter 1, Chapter 1 of the.2006 edition); - Added terms and definitions (see Chapter 2); --- modify the edge of the straightness of the formula (see 2.1,.2006 version 4.1.1); --- modified the straight angle of the formula (see 2.2, version 5.1.1); - Modification of the representation of the size deviation (see 2.5, 4.5, 6.5, 2.5 of 2.5, 4.5, 5.5); - modified the definition of "glaze" (see 8.1.2 of 2.8 and.2006); - modified the definition of "bump" (see 8.1.10 of 2.16,.2006); - an increase in the definition of "throwing marks" (see 2.20); - Modification of the dimensions of some of the products (see Chapter 7, Chapter 8, Chapter 7 of the.2006 edition). This part uses the re-drafting method to modify ISO 10545-2..1995 "Ceramic tiles Part 2. Inspection of dimensions and surface quality" (English version). The main differences between this part and ISO 10545-2..1995 are as follows. --- Standard name changed to "Test method for ceramic tiles Part 2. Inspection of dimensions and surface quality"; - Added terms and definitions (see Chapter 2); - incorporated into the technical bulletin 10545-2..1995/Cor.l..1997 published in.1997, the original term "6.1.2 edge bending "6.1.2 center curvature" is replaced by "6.1.2 edge curvature" (see 2.4, 2.5); - an increase in the definition of "throwing marks" (see 2.20); - increased "convex and concave measurements" (see Chapter 8); - Added "measurement of the difference in the length of the pair and the difference in the length of the diagonal" (see Chapter 9). This section is proposed by the China Building Materials Federation. This part of the National Building Sanitary Ceramics Standardization Technical Committee (SAC/TC249) centralized. This part of the drafting unit. Xianyang Ceramic Research and Design Institute, Hangzhou Nobel Group Co., Ltd., Guangdong Mona Lisa New Materials Group Ltd., Guangdong Dongpeng Ceramics Co., Ltd., Guangdong Dongpeng Holding Co., Ltd., Ministry of Industry and Information Technology Building Sanitary Ceramics and Sanitary Ware Quality Control Technology Evaluation Laboratory. The main drafters of this section. Duan Xianhu, Wang Bo, Li Ying, Zhang Qikang, Tan Aluang, Jin Guoting. This part of the previous version of the standard to replace the release of the situation. --- GB/T 11948-1989; GB/T 3810.2-1999, GB/T 3810.2-2006. Test method for ceramic tiles Part 2. inspection of dimensions and surface quality

1 Scope

This part of GB/T 3810 specifies the size (length, width, thickness, edge straightness, straight angle, surface roughness) of the ceramic tile and table Inspection of surface quality. Spaced flanges, glaze bubbles and other edge irregularities If the bricks are concealed in the gray seam, then the length, width, Edge straightness and straight angle can be ignored.

2 terms and definitions

The following terms and definitions apply to this document. 2.1 Straightness straightness In the plane of the brick, the center of the center deviates from the deviation of the line. This measurement is only applicable to the straight edge of the brick, see Figure 1, the results expressed as a percentage, see formula (1). Edge straightness = L x 100% (1) Where. C - the deviation of the center of the measuring edge from the straight line, in millimeters (mm); L - Length of measurement, in millimeters (mm). Edge straightness = Figure 1 edge straightness 2.2 Straight angle deviation fromrectangularity Place a corner of the brick against the right angle corrected with the standard plate, see Figure 2, the deviation of the angle from the standard right angle. The straight angle is expressed as a percentage, see equation (2).

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 3810.2-2016_English be delivered?

Answer: Upon your order, we will start to translate GB/T 3810.2-2016_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 3810.2-2016_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 3810.2-2016_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 3810.2-2016?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 3810.2-2016 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.