|
Std ID |
Description (Standard Title) |
|
YS/T 1161.2-2016
|
Chemical analysis methods of pseudoboehmite—Part 2: Determination of the loss of mass—Gravimetric method
|
|
YS/T 1161.3-2016
|
Chemical analysis methods of pseudoboehmite—Part 3: Determination of pore volume and specific surface area—Bynitrogen adsorption
|
|
YS/T 1166-2016
|
Test method for IR transmissivity of high pure germanium tetrachloride
|
|
YS/T 23-2016
|
Test method for thickness of epitaxial layers - Stacking fault size
|
|
YS/T 24-2016
|
Test methods for spike of epitaxial layers
|
|
YS/T 26-2016
|
Test methods for edge contour of silicon wafers
|
|
YS/T 1065.1-2015
|
Methods for physical performance determination of zeolite - Part 1: Determination of calcium binding capacity - EDTA titrimetric method
|
|
YS/T 1065.2-2015
|
Methods for physical performance determination of zeolite - Part 2: Determination of particle size - Centrifugal sedimentation method
|
|
YS/T 1065.3-2015
|
Methods for physical performance determination of zeolite. Part 3: Determination of loss of mass. The gravimetric method
|
|
YS/T 1065.4-2015
|
Methods for physical performance determination of zeolite. Part 4: Determination of non-ionic liquid-carrying capacity
|
|
YS/T 14-2015
|
Test method for thickness of heteroepitaxy layers and polycrystalline layers
|
|
YS/T 15-2015
|
Test method for thickness of epitaxial layers and diffused layers by angle lap stain
|
|
YS/T 1002-2014
|
Calculation method of anode effect frequency and anode effect duration for aluminum electrolysis
|
|
YS/T 976-2014
|
Determination of α-alumina content in calcined alumina by X-ray diffraction
|
|
YS/T 438.1-2013
|
Methods for physical performance determination of sandy alumina. Part 1: Determination of size distribution-sieving method
|
|
YS/T 438.2-2013
|
Methods for physical performance determination of sandy alumina. Part 2: Determination of the attrition index
|
|
YS/T 438.3-2013
|
Methods for physical performance determination of sandy alumina. Part 3: Determination of the angle of repose
|
|
YS/T 438.4-2013
|
Methods for physical performance determination of sandy alumina. Part 4: B.E.T method for determination of specific surface area
|
|
YS/T 438.5-2013
|
Methods for physical performance determination of Sandy alumina. Part 5: X-ray diffraction spectrum method for detemination of α-alumina content
|
|
YS/T 864-2013
|
Method of slab band tinsel surface cleanliness analysis of copper and copper alloys
|
|
YS/T 273.3-2012
|
Chemical analysis methods and physical properties of cryolite. Part 3: Determination of fluoride content
|
|
YS/T 581.15-2012
|
Aluminum fluoride chemical analysis methods and determination of physical performance Part 15: X -ray fluorescence spectroscopy (tablet) Determination of element content
|
|
YS/T 581.3-2012
|
Determination of chemical contents and physical properties of aluminium fluoride. Part 3: Determination of fluoride content
|
|
YS/T 784-2012
|
Measurement of technical parameter for aluminium cell
|
|
YS/T 581.17-2010
|
Determination of chemical contents and physical properties of aluminium fluoride. Part 17: Determination of flow time
|
|
YS/T 738.4-2010
|
Analysis method for aluminum hydroxide for filler. Part 4: Determination method of viscosity
|
|
YS/T 517-2009
|
Sodium fluoride
|
|
YS/T 535.10-2009
|
Chemical analysis methods of sodium fluoride. Part 10: Preparation and storage of test samples
|
|
YS/T 535.1-2009
|
Chemical analysis methods of sodium fluoride. Part 1: Determination of moisture content. Gravimetric method
|
|
YS/T 535.2-2009
|
Chemical analysis methods of sodium fluoride. Part 2: Determination of fluorine content. Distillation-thorium nitrate volumetric method
|
|
YS/T 535.3-2009
|
Chemical analysis methods of sodium fluoride. Part 3: Determination of silica content. Molybdenum blue photometric method
|
|
YS/T 1491-2021
|
(Method for measuring the sphericity of nickel-based superalloy powder by scanning electron microscopy)
|
|
YS/T 273.1-2020
|
Methods for chemical analysis and physical properties test of cryolite - Part 1: Determination of moisture content - Gravimetric method
|
|
YS/T 273.16-2020
|
Methods for chemical analysis and physical properties test of cryolite - Part 16: Determination of lithium content - Flame atomic absorption spectrometric method
|
|
YS/T 273.17-2020
|
Methods for chemical analysis and physical properties test of cryolite - Part 17: Determination of elements content - lnductively coupled plasma atomic emission spectrometric method
|
|
YS/T 273.3-2020
|
Chemical analysis methods and physical properties of cryolite - Part 3: Determination of fluoride content by distillation-thorium nitrate titration
|
|
YS/T 273.4-2020
|
Methods for chemical analysis and physical properties test of cryolite - Part 4: Determination of aluminium content - EDTA titration method
|
|
YS/T 273.8-2020
|
Methods for chemical analysis and physical properties test of cryolite - Part 8: Determination of sulphate content - Barium sulphate gravimetric method
|
|
YS/T 273.9-2020
|
Methods for chemical analysis and physical properties test of cryolite - Part 9: Determination of phosphorous pentoxide content - Molybdenum blue photometric method
|
|
YS/T 738.5-2020
|
(Analytical method of aluminum hydroxide for filler - Part 5: Determination of particle size)
|
|
YS/T 1309-2019
|
(Titanium and titanium alloy coatings)
|
|
YS/T 1256-2018
|
Nonferrous metal materials -- Specific heat capacity testing -- Differential scanning calorimetry
|
|
YS/T 1257-2018
|
Nonferrous metal materials -- Enthalpies of fusion and crystallization testing -- Differential scanning calorimetry
|
|
YS/T 1258-2018
|
Nonferrous metal materials -- Melting and crystallization temperatures -- Thermal analysis
|
|
YS/T 679-2018
|
Test methods for minority carrier diffusion length in extrinsic semiconductors. Surface photovoltage method
|
|
YS/T 602-2017
|
Test method for resistivity of zone-refined germaniun ingot using a two-point probe
|
|
YS/T 1124-2016
|
Testing method on pass through flux of magnetic sputtering target
|
|
YS/T 1161.1-2016
|
Chemical analysis methods of pseudoboehmite—Part 1: Determination of gelation index—EDTA titrimetric method
|
|
YS/T 535.4-2009
|
Chemical analysis methods of sodium fluoride. Part 4: Determination of iron content. 1, 10-phenanthroline spectrophotometric method
|
|
YS/T 535.5-2009
|
Chemical analysis methods of sodium fluoride. Part 5: Determination of soluble sulphates content. Turbidimetric method
|
|
YS/T 535.6-2009
|
Chemical analysis methods of sodium fluoride. Part 6: Determination of carbonate content. Gravimetric method
|
|
YS/T 535.7-2009
|
Chemical analysis methods of sodium fluoride. Part 7: Determination of acidity. Neutral titration method
|
|
YS/T 535.8-2009
|
Chemical analysis methods of sodium fluoride. Part 8: Determination of water insoluble matter content. Gravimetric method
|
|
YS/T 535.9-2009
|
Chemical analysis methods of sodium fluoride. Part 9: Determination of chloride content. The turbidimetric method
|
|
YS/T 455.8-2007
|
Aluminium foil test methods. Part 8: Method for measuring cube texture content
|
|
YS/T 581.15-2007
|
Determination of chemical contents and physical properties of aluminium fluoride. Part 15: Free alumina content
|
|
YS/T 602-2007
|
Test method for resistivity of zone-refined germanium ingot using a two-point probe
|
|
YS/T 617.10-2007
|
Determination of chemical compositions and physical properties of aluminum powder, magnesium powder and Al-Mg alloy powder. Part 10: Determination of coating surface of aluminum powder
|
|
YS/T 617.1-2007
|
Determination of chemical compositions and physical properties of aluminum powder, magnesium powder and Al-Mg alloy powder. Part 1: Determination of active Al, Mg or Al-Mg content. Gasometric method
|
|
YS/T 617.2-2007
|
Determination of chemical compositions and physical properties of aluminum powder, magnesium powder and Al-Mg alloy powder. Part 2: Determination of aluminum content of Al-Mg alloy powders. Fluoride replacement complexometric method
|
|
YS/T 617.3-2007
|
Determination of chemical compositions and physical properties of aluminum powder, magnesium powder and Al-Mg alloy powder. Part 3: Determination of volatile matter (water) content. Drying-degravimetric method
|
|
YS/T 617.4-2007
|
Determination of chemical compositions and physical properties of aluminum powder, magnesium powder and Al-Mg alloy powder. Part 4: Determination of insoluble content in hydrochloric acid of magnesium powder. Gravimetric method
|
|
YS/T 617.5-2007
|
Determination of chemical compositions and physical properties of aluminum powder, magnesium powder and Al-Mg alloy powder. Part 5: Determination of grease content of aluminum powder
|
|
YS/T 617.6-2007
|
Determination of chemical compositions and physical properties of aluminum powder, magnesium powder and Al-Mg alloy powder. Part 6: Determination of particle size distribution. Sieve method
|
|
YS/T 617.7-2007
|
Determination of chemical compositions and physical properties of aluminum powder, magnesium powder and Al-Mg alloy powder. Part 7: Determination of particle size distribution. Laser scatterance/diffraction method
|
|
YS/T 617.8-2007
|
Determination of chemical compositions and physical properties of aluminum powder, magnesium powder and Al-Mg alloy powder. Part 8: Determination of apparent density
|
|
YS/T 617.9-2007
|
Determination of chemical compositions and physical properties of aluminum powder, magnesium powder and Al-Mg alloy powder. Part 9: Determination of adhesion ratio of aluminum powder
|
|
YS/T 618-2007
|
Test methods for oil absorption of aluminium hydroxide for filler
|
|
YS/T 629.1-2007
|
Chemical analysis methods of high purity alumina. Determination of silicon dioxide. Molybdenum blue photometric method extracted with n-Amyl alcohol
|
|
YS/T 629.2-2007
|
Chemical analysis methods of high purity alumina. Determination of ferric oxide Orthopenanthroline photometric method extracted with Methyl-iso-butyl ketone
|
|
YS/T 629.3-2007
|
Chemical analysis methods of high purity alumina. Determination of sodium oxide. Flame atomic absorption spectrophotometric method
|
|
YS/T 629.4-2007
|
Chemical analysis methods of high purity alumina. Determination of potassium oxide. Flame atomic absorption spectrophotometric method
|
|
YS/T 629.5-2007
|
Chemical analysis methods of high purity alumina. Determination of calcium oxide and magnesium oxide. Inductively coupled plasma atomic emissiojn spectrometric method
|
|
YS/T 273.10-2006
|
Chemical analysis methods and physical properties of cryolite. Part 10: Determination of alumina content by gravimetric method
|
|
YS/T 273.11-2006
|
Chemical analysis methods and physical properties of cryolite. Part 11: Determination of sulphur content by X-ray fluorescence spectrometric method
|
|
YS/T 273.1-2006
|
Chemical analysis methods and physical properties of cryolite. Part 1: Determination of moisture content by gravimetric method
|
|
YS/T 273.12-2006
|
Chemical analysis methods and physical properties of cryolite. Part 12: The atomic absorption spectrophotometric method for the determination of calcium oxide content
|
|
YS/T 273.13-2006
|
Chemical analysis methods and physical properties of cryolite. Part 13: Preparation and storage of test samples
|
|
YS/T 273.2-2006
|
Chemical analysis methods and physical properties of cryolite. Part 2: Determination of ignition loss
|
|
YS/T 273.3-2006
|
Chemical analysis methods and physical properties of cryolite. Part 3: Determination of fluoride content by distillation-thorium nitrate titration
|
|
YS/T 273.4-2006
|
Chemical analysis methods and physical properties of cryolite. Part 4: Determination of aluminium by the EDTA volumetric method
|
|
YS/T 273.5-2006
|
Chemical analysis methods and physical properties of cryolite. Part 5: Determination of sodium by flame atomic absorption spectrometric method
|
|
YS/T 273.6-2006
|
Chemical analysis methods and physical properties of cryolite. Part 6: Determination of silica content by the molybdenum blue photometric
|
|
YS/T 273.7-2006
|
Chemical analysis methods and physical properties of cryolite. Part 7: Determination of iron content by orthophenantholine photometric method
|
|
YS/T 273.8-2006
|
Chemical analysis methods and physical properties of cryolite. Part 8: Determination of sulphate content by barium sulphate gravimetric method
|
|
YS/T 273.9-2006
|
Chemical analysis methods and physical properties of cryolite. Part 9: Determination of phosphorous pentoxide by molybdenum blue photometric method
|
|
YS/T 455.7-2006
|
Aluminum foil test methods - Part 7: Determination of aluminum foil thickness weighing method
|
|
YS/T 516-2006
|
Tungsten secondary recrystallization temperature measurement method
|
|
YS/T 533-2006
|
Self-fluxing alloy powders. Determination of solidus. Liquidus temperature range
|
|
YS/T 581.10-2006
|
Determination of chemical contents and physical properties of aluminium fluoride. Part 10: Determination of sulphur content by X-ray fluorescence spectrometric method
|
|
YS/T 581.11-2006
|
Determination of chemical contents and physical properties of aluminium fluoride. Part 11: Preparation and storage of test samples
|
|
YS/T 581.1-2006
|
Determination of chemical contents and physical properties of aluminium fluoride. Part 1: Determination of moisture content by gravimetric method
|
|
YS/T 581.12-2006
|
Determination of chemical contents and physical properties of aluminium fluoride. Part 12: Determination of size distribution. Sieving method
|
|
YS/T 581.13-2006
|
Determination of chemical contents and physical properties of aluminium fluoride. Part 13: Measurement of the angle of repose
|
|
YS/T 581.14-2006
|
Determination of chemical contents and physical properties of aluminium fluoride. Part 14: Determination of untamped density
|
|
YS/T 581.2-2006
|
Determination of chemical contents and physical properties of aluminium fluoride. Part 2: Determination of ignition loss
|
|
YS/T 581.3-2006
|
Determination of chemical contents and physical properties of aluminium fluoride Part 3: Determination of fluoride content distillation-thorium nitrate titration volumetric method
|
|
YS/T 581.4-2006
|
Determination of chemical contents and physical properties of aluminium fluoride. Part 4: Determination of aluminium bu the EDTA volumetric method
|
|
YS/T 581.5-2006
|
Determination of chemical contents and physical properties of aluminium fluoride. Part 5: Determination of sodium by flame atomic absorption spectrometric method
|
|
YS/T 581.6-2006
|
Determination of chemical contents and physical properties of aluminium fluoride. Part 6: Determination of silica content by the molybdenum blue photometric
|