YS/T 784-2024 English PDF

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
YS/T 784-2024	RFQ	ASK	3 days	(Aluminum electrolytic cell technical parameter measurement method)	Valid
YS/T 784-2012	559	Add to Cart	3 days	Measurement of technical parameter for aluminium cell	Obsolete

Basic data

Standard ID: YS/T 784-2024 (YS/T784-2024)
Description (Translated English): (Aluminum electrolytic cell technical parameter measurement method)
Sector / Industry: Nonferrous Metallurgy Industry Standard (Recommended)
Classification of Chinese Standard: H21
Classification of International Standard: 77.02
Date of Issue: 2024-10-24
Date of Implementation: 2025-05-01
Older Standard (superseded by this standard): YS/T 784-2012
Issuing agency(ies): Ministry of Industry and Information Technology
Summary: This standard specifies the measurement methods of technical parameters such as aluminum liquid and electrolyte height, pressure drop, furnace wall thickness, leg extension length, temperature, current distribution, pole distance, furnace bottom ridge, anode clamp pressure drop, aluminum liquid flow field, and magnetic field in aluminum electrolytic cells. This standard is applicable to the measurement of technical parameters of pre-baked anode aluminum electrolytic cells.

YS/T 784-2012: Measurement of technical parameter for aluminium cell

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Measurement of technical parameter for aluminium cell ICS 77.020 H21 People's Republic of China Nonferrous Metals Industry Standard Aluminum reduction cell technology measurement methods Issued on. 2012-05-24 2012-11-01 implementation Ministry of Industry and Information Technology of the People's Republic of China released

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard by the national non-ferrous metals Standardization Technical Committee (SAC/TC243) centralized. This standard was drafted. CPI Ningxia Qingtongxia Energy Aluminium Group Limited. The main drafters of this standard. Niu Qing Ren, Zhan Lei Yucheng Bin, Wang Yanqing, Chen Jinghui, Yang Fuguang, Ma Zhijun. Aluminum reduction cell technology measurement methods

1 Scope

This standard specifies the method for measuring the technical parameters of aluminum electrolysis cell. This standard applies to the measurement of parameters pre-baked anode cell technology.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. YS/T 480 reduction cell energy balance test and calculation methods into four points and two points into electrical power prebaked anode aluminum cell YS/T 481 reduction cell energy balance test and calculation methods into five o'clock and at six electric power prebaked anode aluminum cell

3 Measuring Tools

3.1 Digital Multimeter. Range 0mV ~ 2000mV, the unit is accurate to millivolts. Table 3.2 Digital thermometer. range is 0 ℃ ~ 1300 ℃, an accuracy of ± 2 ℃. 3.3 infrared temperature gun. the range of 0 ℃ ~ 1300 ℃, an accuracy of ± 2 ℃. 3.4 digital millivolt table. 3.5 handheld K-type thermocouple. Level 3.6. 3.7 meter ring. 3.8 steel ruler. graduate to the nearest millimeter. 3.9 stainless steel measuring rod. consists of two 18mm diameter stainless steel rod through a connecting member (glue stick or stainless steel) connection is made, measuring stick Connect one end of a suspension made by the end of bakelite, is shown in Figure 1. The total length (L) and the measuring length (L1) according to different geometries determine.

1 a schematic diagram of stainless steel measuring rod

3.10 oblique steel bar measuring brazing. made of 12mm ~ 18mm diameter steel rod, measuring side and angled end of the handle. Measuring end, the handle End of length and angle can be determined depending on the groove, is shown in Figure 2. 3.11 Hooked drill rod. length 1.5m, the end of the hook. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of YS/T 784-2024_English be delivered?

Answer: Upon your order, we will start to translate YS/T 784-2024_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of YS/T 784-2024_English with my colleagues?

Answer: Yes. The purchased PDF of YS/T 784-2024_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version YS/T 784-2024?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version YS/T 784-2024 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.