|
Std ID |
Description (Standard Title) |
Detail |
|
GB/T 28539-2012
|
Ophthalmic optics -- Contact lenses and contact lens care products -- Guidelines for determination of preservative uptake and release
|
GB/T 28539-2012
|
|
GB/T 27765-2011
|
Testing methods of SiO2, TiO2, Fe3O4 and Al2O3 nanoparticles biological effect by transmission electron microscope (TEM)
|
GB/T 27765-2011
|
|
GB/T 28044-2011
|
General guide of detection method for nanomaterial biological effect by transmission electron microscope (TEM)
|
GB/T 28044-2011
|
|
GB/T 21416-2008
|
Clinical electronic thermometer [including MODIFICATION 1]
|
GB/T 21416-2008
|
|
GB/T 21417.1-2008
|
Clinical infrared thermometers -- Part 1: Ear [including MODIFICATION 1]
|
GB/T 21417.1-2008
|
|
GB/T 44875-2024
|
Fallopian rings - Requirements and test methods
|
GB/T 44875-2024
|
|
GB/T 42168.1-2022
|
Condoms - Guidance on clinical studies - Part 1: Male condoms, clinical function studies based on self reports
|
GB/T 42168.1-2022
|
|
GB/T 18990.1-2003
|
Luteinizing hormone (LH) test strip -- Part 1: Ovulation test strip
|
GB/T 18990.1-2003
|
|
GB/T 18990.2-2003
|
Luteinizing hormone (LH) test strip -- Part 2: Sterility test strip
|
GB/T 18990.2-2003
|
|
GB/T 18990.3-2003
|
Luteinizing hormone (LH) test strip -- Part 3: Contraceptive test strip
|
GB/T 18990.3-2003
|
|
GB/T 6762.1-1992
|
Rubber condoms--Determination of length
|
GB/T 6762.1-1992
|
|
GB/T 6762.2-1992
|
Rubber condoms--Determination of width
|
GB/T 6762.2-1992
|
|
GB/T 6762.3-1992
|
Rubber condoms--Testing for holes
|
GB/T 6762.3-1992
|
|
GB/T 6762.4-1992
|
Rubber condoms--Determination of bursting volume and pressure
|
GB/T 6762.4-1992
|
|
GB/T 6762.5-1992
|
Rubber condoms--Pakaging and labelling--condoms in consumer packages
|
GB/T 6762.5-1992
|
|
GB/T 6762.6-1992
|
Rubber condoms--storage
|
GB/T 6762.6-1992
|
|
GB/T 6762.7-1992
|
Rubber condoms--Determination of colour fastness
|
GB/T 6762.7-1992
|
|
GB/T 7545-1992
|
Rubber condoms--Determination of resistance to deterioration during storage
|
GB/T 7545-1992
|
|
GB/T 7546-1992
|
Rubber condoms--Determination of tensile properties
|
GB/T 7546-1992
|
|
GB/T 7547-1992
|
Rubber condoms--Determination of mass
|
GB/T 7547-1992
|
|
GB/T 12417.2-2025
|
Non-active surgical implants - Osteosynthesis and joint replacement implants - Part 2: Particular requirements for joint replacement implants
|
GB/T 12417.2-2025
|
|
GB/T 19701.1-2024
|
Implants for surgery - Ultra-high-molecular-weight polyethylene - Part 1: Powder form
|
GB/T 19701.1-2024
|
|
GB/T 19701.2-2024
|
Implants for surgery - Ultra-high-molecular-weight polyethylene - Part 2: Moulded forms
|
GB/T 19701.2-2024
|
|
GB/T 19701.3-2024
|
Implants for surgery - Ultra-high-molecular-weight polyethylene - Part 3: Accelerated ageing methods
|
GB/T 19701.3-2024
|
|
GB/T 19701.5-2024
|
Implants for surgery - Ultra-high-molecular-weight polyethylene - Part 5: Morphology assessment method
|
GB/T 19701.5-2024
|
|
GB/T 12417.1-2024
|
Non-active surgical implants - Osteosynthesis and joint replacement implants - Part 1: Particular requirements for osteosynthesis implants
|
GB/T 12417.1-2024
|
|
GB/T 22750.1-2024
|
Implants for surgery - Ceramic materials - Part 1: Ceramic materials based on high purity alumina
|
GB/T 22750.1-2024
|
|
GB/T 22750.2-2024
|
Implants for surgery - Ceramic materials - Part 2: Composite materials based on a high purity alumina matrix with zirconia reinforcement
|
GB/T 22750.2-2024
|
|
GB/T 44876-2024
|
Implants for surgery - Cleanliness of orthopedic implants - General requirements
|
GB/T 44876-2024
|
|
GB/T 23101.3-2023
|
Implants for surgery - Hydroxyapatite - Part 3: Chemical analysis and characterization of crystallinity ratio and phase purity
|
GB/T 23101.3-2023
|
|
GB/T 23101.4-2023
|
Implants for surgery - Hydroxyapatite - Part 4: Determination of coating adhesion strength
|
GB/T 23101.4-2023
|
|
GB/T 43350-2023
|
Prosthetics - Quantification of physical parameters of ankle foot devices and foot units
|
GB/T 43350-2023
|
|
GB/T 24627-2023
|
Wrought nickel-titanium shape memory alloys for surgical implants
|
GB/T 24627-2023
|
|
GB/T 23101.6-2022
|
Implants for surgery - Hydroxyapatite - Part 6: Powders
|
GB/T 23101.6-2022
|
|
GB/T 41428.1-2022
|
Implants for surgery - Orthopaedic joint prosthesis - Part 1: Procedure for producing parametric 3D bone models from CT data of the knee
|
GB/T 41428.1-2022
|
|
GB/T 41672-2022
|
Implants for surgery - Osteoinductive calcium phosphate bioceramics
|
GB/T 41672-2022
|
|
GB/T 41839-2022
|
Lumbar orthoses - Waist fixed elastic belt
|
GB/T 41839-2022
|
|
GB/T 14191.2-2021
|
Prosthetics and orthotics - Vocabulary - Part 2: Terms relating to external limb prostheses and wearers of these prostheses
|
GB/T 14191.2-2021
|
|
GB/T 30660.2-2021
|
Prosthetics and orthotics - Vocabulary - Part 2: Prosthetic gait
|
GB/T 30660.2-2021
|
|
GB/T 39756-2021
|
General specification for the scanning voice reading machine
|
GB/T 39756-2021
|
|
GB/T 30660.3-2021
|
Prosthetics and orthotics - Vocabulary - Part 3: Pathological gait
|
GB/T 30660.3-2021
|
|
GB/T 36983-2018
|
Porous tantalum material for surgical implant applications
|
GB/T 36983-2018
|
|
GB/T 36984-2018
|
X-ray CT testing method of the porous metal materials for surgical implant applications
|
GB/T 36984-2018
|
|
GB/T 37103-2018
|
Assessment of self-care abilities in daily life for persons with disability
|
GB/T 37103-2018
|
|
GB/T 19701.1-2016
|
Implants for surgery -- Ultra-high-molecular-weight polyethylene -- Part 1: Powder form
|
GB/T 19701.1-2016
|
|
GB/T 19701.2-2016
|
Implants for surgery -- Ultra-high-molecular-weight polyethylene -- Part 2: Moulded forms
|
GB/T 19701.2-2016
|
|
GB/T 30657-2014
|
Prostheses and orthoses -- Factors to be included when describing physical activity of a person who has had a lower limb amputation (s) or who has a deficiency of a lower limb segment (s) present a birth
|
GB/T 30657-2014
|
|
GB/T 30658-2014
|
Prostheses and orthoses -- Factors to be considered when specifying a prosthesis for a person who has had a lower limb amputation
|
GB/T 30658-2014
|
|
GB/T 30659-2014
|
External limb prostheses and external orthoses -- Requirements and test methods
|
GB/T 30659-2014
|
|
GB/T 30660.1-2014
|
Prosthetics and orthotics -- Vocabulary -- Part 1: Normal gait
|
GB/T 30660.1-2014
|
|
GB/T 31181-2014
|
Prosthetics Testing of ankle-foot devices and foot units -- Requirements and test methods
|
GB/T 31181-2014
|
|
GB/T 24629-2009
|
Implants for surgery -- Guidance on care and handling of orthopaedic implants
|
GB/T 24629-2009
|
|
GB/T 12417.1-2008
|
Non-active surgical implants -- Osteosynthesis and joint replacement implants -- Part 1: Particular requirements for osteosynthesis implants
|
GB/T 12417.1-2008
|
|
GB/T 12417.2-2008
|
Non-active surgical implants -- Osteosynthesis and joint replacement implants -- Part 2: Particular requirements for joint replacement implants
|
GB/T 12417.2-2008
|
|
GB/T 22750-2008
|
Implants for surgery -- Ceramic materials based on high purity alumina
|
GB/T 22750-2008
|
|
GB/T 19701.2-2005
|
Implants for surgery Ultra-high molecular weight polyethylene -- Part 2: Moulded forms
|
GB/T 19701.2-2005
|
|
GB/T 19701.1-2005
|
Implants for surgery -- Ultra-high molecular weight polyethylene -- Part 1: Powder form
|
GB/T 19701.1-2005
|
|
GB/T 14191-1993
|
Terminology for prosthetics and orthotics
|
GB/T 14191-1993
|
|
GB/T 13461-1992
|
Synthetic resin blow knee prostheses
|
GB/T 13461-1992
|
|
GB/T 45999.2-2025
|
Dentistry - Dental furnace - Part 2: Test method for evaluation of furnace programme via firing glaze
|
GB/T 45999.2-2025
|
|
GB/T 46009-2025
|
Dentistry - Minimal dental implant data set for clinical use
|
GB/T 46009-2025
|
|
GB/T 36917.2-2024
|
Dentistry - Laboratory cutters - Part 2: Carbide laboratory cutters
|
GB/T 36917.2-2024
|
|
GB/T 44466-2024
|
Dentistry - Operator’s stool
|
GB/T 44466-2024
|
|
GB/T 44469-2024
|
Dental rotary instruments - Laboratory abrasive instruments
|
GB/T 44469-2024
|
|
GB/T 41230-2022
|
Dentistry - Digitizing devices for CAD/CAM systems for indirect dental restorations - Test methods for assessing accuracy
|
GB/T 41230-2022
|
|
GB/T 41426-2022
|
Dentistry - Integrated dental floss and handles
|
GB/T 41426-2022
|
|
GB/T 36917.3-2022
|
Dentistry - Laboratory cutters - Part 3: Carbide cutters for milling machines
|
GB/T 36917.3-2022
|
|
GB/T 36917.4-2022
|
Dentistry - Laboratory cutters - Part 4: Miniature carbide laboratory cutters
|
GB/T 36917.4-2022
|
|
GB/T 39111-2020
|
Technical requirements for dental model 3D scanner
|
GB/T 39111-2020
|
|
GB/T 9937-2020
|
Dentistry - Vocabulary
|
GB/T 9937-2020
|
|
GB/T 36108-2018
|
CAD software technical requirements of fixed dental restoration
|
GB/T 36108-2018
|
|
GB/T 36917.1-2018
|
Dentistry -- Laboratory cutters -- Part 1: Steel laboratory cutters
|
GB/T 36917.1-2018
|
|
GB/T 36917.2-2018
|
Dentistry -- Laboratory cutters -- Part 2: Carbide laboratory cutters
|
GB/T 36917.2-2018
|
|
GB/T 9938-2013
|
Dentistry -- Designation system for teeth and areas of the oral cavity
|
GB/T 9938-2013
|
|
GB/T 9937.1-2008
|
Dental vocabulary -- Part 1: General and clinical terms
|
GB/T 9937.1-2008
|
|
GB/T 9937.2-2008
|
Dental vocabulary -- Part 2: Dental materials
|
GB/T 9937.2-2008
|
|
GB/T 9937.3-2008
|
Dental vocabulary -- Part 3: Dental instruments
|
GB/T 9937.3-2008
|
|
GB/T 9937.5-2008
|
Dental vocabulary -- Part 5: Terms associated with testing
|
GB/T 9937.5-2008
|
|
GB/T 9937.4-2005
|
Dental vocabulary -- Part 4: Dental equipment
|
GB/T 9937.4-2005
|
|
GB/T 9937-1988
|
Terms associated with the testing and the operating of dental material, instruments and equipment
|
GB/T 9937-1988
|
|
GB/T 9938-1988
|
Dentistry--Designation system for teeth and areas of the oral cavity
|
GB/T 9938-1988
|
|
GB/T 6387-1986
|
Vocabulary of dental materials
|
GB/T 6387-1986
|
|
GB/T 39893-2021
|
Handheld electro-optical low-vision device
|
GB/T 39893-2021
|
|
GB/T 26339-2010
|
Ophthalmic optics and instruments -- Electro-optical devices for enhancing low vision
|
GB/T 26339-2010
|
|
GB/T 46388.1-2025
|
(Sharps injury protection - Requirements and test methods - Part 1: Single-use sharps containers)
|
GB/T 46388.1-2025
|
|
GB/T 46388.2-2025
|
(Sharps injury protection - Requirements and test methods - Part 2: Reusable sharps containers)
|
GB/T 46388.2-2025
|
|
GB/T 18457-2024
|
Stainless steel needle tubing for the manufacture of medical devices - Requirements and test methods
|
GB/T 18457-2024
|
|
GB/T 14233.3-2024
|
Test methods for infusion, transfusion, injection equipments for medical use - Part 3: Microbiological test methods
|
GB/T 14233.3-2024
|
|
GB/T 43277.1-2023
|
Clamps and flow regulators for medical infusion and transfusion equipment - Part 1: Clamps and flow regulators without fluid contact
|
GB/T 43277.1-2023
|
|
GB/T 43277.2-2023
|
Clamps and flow regulators for medical infusion and transfusion equipment - Part 2: Graduated flow regulators with fluid contact
|
GB/T 43277.2-2023
|
|
GB/T 19335-2022
|
Blood flow products for single use - General specification
|
GB/T 19335-2022
|
|
GB/T 14233.1-2022
|
Test methods for infusion, transfusion, injection equipment for medical use - Part 1: Chemical analysis methods
|
GB/T 14233.1-2022
|
|
GB/T 2766-2022
|
Surgical instruments - Non-cutting, articulated instruments - General requirements and test methods
|
GB/T 2766-2022
|
|
GB/T 42063-2022
|
Sharps injury protection - Requirements and test methods - Sharps protection features for single-use hypodermic needles, introducers for catheters and needles used for blood sampling
|
GB/T 42063-2022
|
|
GB/T 40976-2021
|
Moxa floss used in moxibustion
|
GB/T 40976-2021
|
|
GB/T 14232.2-2015
|
Plastics collapsible containers for human blood and blood components -- Part 2: Graphical symbols for use on labels and instruction leaflets
|
GB/T 14232.2-2015
|
|
GB/T 1962.1-2015
|
Conical fittings with a 6% (Luer) taper for syringes, needles and certain other medical equipment -- Part 1: General requirement
|
GB/T 1962.1-2015
|
|
GB/T 18457-2015
|
Stainless steel needle tubing for the manufacture of medical devices
|
GB/T 18457-2015
|
|
GB/T 14233.1-2008
|
Test methods for infusion, transfusion, injection equipment for medical use -- Part 1: Chemical analysis methods
|
GB/T 14233.1-2008
|
|
GB/T 2766-2006
|
Haemostatic forceps with box joint -- General specifications
|
GB/T 2766-2006
|