Powered by Google-Search & Google-Books www.ChineseStandard.net Database: 169759 (May 2, 2021)
HOME   Quotation   Tax   Examples Standard-List   Contact-Us   Cart
  

GB/T 36917.1-2018 (GBT 36917.1-2018)

Chinese Standard: 'GB/T 36917.1-2018'
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)Related StandardStatusGoogle Book
GB/T 36917.1-2018English214 Add to Cart Days<=3 Dentistry -- Laboratory cutters -- Part 1: Steel laboratory cutters GB/T 36917.1-2018 Valid GB/T 36917.1-2018
GB/T 36917.1-2018Chinese18 Add to Cart <=1-day [PDF from Chinese Authority, or Standard Committee, or Publishing House]  

   

BASIC DATA
Standard ID GB/T 36917.1-2018 (GB/T36917.1-2018)
Description (Translated English) Dentistry--Laboratory cutters--Part 1: Steel laboratory cutters
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard C33
Classification of International Standard 11.060.20
Word Count Estimation 13,183
Date of Issue 2018-12-28
Date of Implementation 2020-01-01
Quoted Standard ISO 1797; ISO 1942; ISO 2157; ISO 6360-3; ISO 8325
Adopted Standard ISO 7787-1-2016, IDT
Drafting Organization Guangdong Medical Device Quality Supervision and Inspection Institute
Administrative Organization National Technical Committee for Standardization of Dental Materials and Devices
Regulation (derived from) National Standard Announcement No. 17 of 2018
Proposing organization State Drug Administration
Issuing agency(ies) State Administration of Markets and China National Standardization Administration
Summary This standard specifies the dimensional requirements and other requirements for steel cutting tools for laboratories. This standard applies to the nine steel cutting tools mainly used in the laboratory. This standard does not apply to other features of the laboratory tool, such as: spiral blade, cross edge.

GB/T 36917.1-2018
Dentistry--Laboratory cutters--Part 1. Steel laboratory cutters
ICS 11.060.20
C33
National Standards of People's Republic of China
Dental science laboratory cutting tool
Part 1. Steel cutting tools for laboratories
(ISO 7787-1.2016, IDT)
Published on.2018-12-28
2020-01-01 implementation
State market supervision and administration
China National Standardization Administration issued
Content
Foreword III
Introduction IV
1 range 1
2 Normative references 1
3 terms and definitions, symbol 1
4 material 2
5 size and number of cutting edges 2
6 radial runout 7
7 Sampling and judgment 7
8 label 7
9 logo 8
Reference 9
Foreword
GB/T 36917 "The cutting tool for dental laboratory" consists of the following four parts.
--- Part 1. Steel cutting tools for laboratories;
--- Part 2. Carbide cutting tools for laboratories;
--- Part 3. Carbide cutting tools for milling machines;
--- Part 4. Micro-carbide cutting tools for laboratories.
This part is the first part of GB/T 36917.
This part is drafted in accordance with the rules given in GB/T 1.1-2009.
This section uses the translation method equivalent to the ISO 7787-1.2016 "cutting tools for dental laboratories Part 1. Steel for laboratories
Cutting tool.
The documents of our country that have a consistent correspondence with the international documents referenced in this part are as follows.
---YY/T 0873.3-2014 Digital coding systems for dental rotary instruments - Part 3. Characteristics of needles and cutting tools
(ISO 6360-3.2005, IDT)
---YY/T 0874-2013 Dentistry Rotating Apparatus Test Method (ISO 8325.2004, IDT)
Please note that some of the contents of this document may involve patents. The issuing organization of this document is not responsible for identifying these patents.
This part is proposed by the State Drug Administration.
This part is under the jurisdiction of the National Technical Committee for Standardization of Dental Materials and Devices (SAC/TC99).
This section drafted by. Guangdong Medical Device Quality Supervision and Inspection Institute, Guangzhou Xifu Medical Equipment Co., Ltd., Shenzhen Speed Air Technology
Development Co., Ltd.
The main drafters of this section. Huang Minju, Zhang Degui, Fang Wei, Wang Zhong, Li Danrong.
introduction
The requirements for the dimensions and other aspects of steel cutting tools specified in this section are very important to ensure the interchangeability of the instruments in the laboratory.
important.
Dental science laboratory cutting tool
Part 1. Steel cutting tools for laboratories
1 Scope
This part of GB/T 36917 specifies the dimensional requirements and other requirements for steel cutting tools for laboratories.
This section applies to the nine steel cutting tools mainly used in the laboratory.
This section does not apply to other features of the laboratory, such as. spiral blade, cross blade.
Note. These cutting tools are also used in foot care.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
ISO 1797 dental rotating and vibrating instrument rods (Dentistry-Shanksforrotaryandoscilatinginstru-
Mess)
ISO 1942 Dentistry-Vocabulary
Nominal diameter and number of ISO 2157 dental rotary instruments (Dentistry-Nominaldiametersanddesignation
Codenumbersforrotaryinstruments)
ISO 6360-3 Digital coding systems for dental rotary instruments - Part 3. Characteristics of needles and cutting tools (Dentistry-
Numbercodingsystemforrotaryinstruments-Part 3.Specificcharacteristicsofbursandcutters)
ISO 8325 Dentistry-Testmethodsforrotaryinstruments
3 terms and definitions, symbols
3.1 Terms and definitions
The following terms and definitions defined by ISO 1942, ISO 6360-3 apply to this document.
3.1.1
Laboratory cutting tool with laboratorycutter
A cutting tool for processing dental materials in a dental laboratory.
3.1.2
Dental laboratory
A place where the process of assisting dental clinical treatment is performed.
[ISO 1942.2009, definition 2.77]
3.2 symbol
The following symbols apply to this document.
d. diameter of the working part, head diameter.
l. the length of the working part, the length of the head.
Related standard: GB/T 36917.2-2018    GB/T 39111-2020
Related PDF sample: GB/T 36108-2018    YY/T 1702-2020