US$279.00 · In stock Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 44469-2024: Dental rotary instruments - Laboratory abrasive instruments Status: Valid
Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
GB/T 44469-2024 | English | 279 |
Add to Cart
|
3 days [Need to translate]
|
Dental rotary instruments - Laboratory abrasive instruments
| Valid |
GB/T 44469-2024
|
PDF similar to GB/T 44469-2024
Basic data Standard ID | GB/T 44469-2024 (GB/T44469-2024) | Description (Translated English) | Dental rotary instruments - Laboratory abrasive instruments | Sector / Industry | National Standard (Recommended) | Classification of Chinese Standard | C33 | Classification of International Standard | 11.060.20 | Word Count Estimation | 14,184 | Date of Issue | 2024-09-29 | Date of Implementation | 2025-10-01 | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration |
GB/T 44469-2024: Dental rotary instruments - Laboratory abrasive instruments---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 11.060.20
CCSC33
National Standard of the People's Republic of China
Dental Rotary Instruments Laboratory Grinding Instruments
(ISO 7786.2001,MOD)
Released on 2024-09-29
2025-10-01 Implementation
State Administration for Market Regulation
The National Standardization Administration issued
Table of Contents
Preface III
Introduction IV
1 Scope 1
2 Normative references 1
3 Terms and Definitions 1
4 Symbols 1
5 Requirements 1
5.1 Materials 1
5.2 Shape 2
5.3 Size 2
5.4 Specifications of grinding instruments for dental laboratories 2
5.5 Radial runout 6
6 Test Methods 6
6.1 Shape 6
6.2 Size 6
6.3 Radial runout 6
7 Sampling and Acceptance Quality Limit (AQL) 7
8 Manufacturer's instructions 7
9 Marking of grinding equipment 7
10 Tags 7
11 Packaging 7
References 8
Foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents"
Drafting.
This document is modified to adopt ISO 7786.2001 “Dental rotary instruments - Laboratory grinding instruments”.
This document has the following structural adjustments compared to ISO 7786.2001.
--- Added "Terms and Definitions" (see Chapter 3);
--- Deleted the overhang section in the size, the statement about "the dimensions in tables and figures are in millimeters and the angles are in degrees".
The technical differences between this document and ISO 7786.2001 and their reasons are as follows.
--- Added the statement "This document applies to the six types of ceramic bonded grinding instruments mainly used in laboratories" (see Chapter 1) to adapt to
my country's technical conditions increase operability;
--- ISO 1797 (see 5.1.2, 5.3.2, Chapter 10) has been replaced with the normative reference YY/T 0967 to adapt to the technical requirements of my country
parts, increasing operability;
--- Replaced ISO 8325 (see 6.1, 6.2, 6.3) with the normative reference YY/T 0874 to adapt to my country's technical conditions and added
Operability;
--- ISO 2859-1 (see Chapter 7) has been replaced by the normative reference GB/T 2828.1 to adapt to my country's technical conditions and add
Operability;
--- Replaced ISO 6360-2 (see Chapter 10) with the normative reference YY/T 0873.2 to adapt to my country's technical conditions and added
Operability;
--- Change "name and/or trademark of the manufacturer or distributor" in a) of the label to "name and/or trademark of the manufacturer" (see Section 10)
Chapter) to adapt to my country's technical conditions and increase operability.
Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents.
This document is proposed by the State Food and Drug Administration.
This document is under the jurisdiction of the National Technical Committee for Standardization of Dental Materials and Instruments (SAC/TC99).
This document was drafted by. Ningbo Xinyuan Dental Instruments Co., Ltd., Guangdong Medical Device Quality Supervision and Inspection Institute, Zhejiang Xinya Medical
Technology Co., Ltd.
The main drafters of this document are. Ruan Zhimeng, Zeng Zhixiong, Yuan Qin, Chen Ying, Feng Zhimei, Zhou Liangbin and Chen Xianming.
Introduction
This document is one of a series of standards related to dental rotary instruments.
This document contains specifications for laboratory-ground instruments. The various dimensions and other requirements for laboratory-ground instruments are considered to ensure that dental
Interchangeability and safe use of these grinding instruments are important requirements in the laboratory.
The nominal diameters of the working parts listed in Tables 1 to 10 conform to the diameters specified in YY/T 1011.
Please note that YY/T 0873 (all parts) specifies a 15-digit coding system for classifying all types of
Dental Rotary Instruments.
Dental Rotary Instruments Laboratory Grinding Instruments
1 Scope
This document specifies the dimensions and other relevant requirements of six common shapes of ceramic bonded abrasive instruments used in dental laboratories.
requirements, including quality control and labeling specifications for these devices.
This document applies to the six main types of ceramic bonded abrasive instruments used in laboratories.
2 Normative references
The contents of the following documents constitute essential clauses of this document through normative references in this document.
For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to
This document.
GB/T 2828.1 Sampling procedures for inspection by attributes Part 1.Sampling plans for batch inspection based on the acceptance quality limit (AQL)
(GB/T 2828.1-2012,ISO 2859-1.1999,IDT)
YY/T 0873.2 Digital Coding System for Dental Rotary Instruments Part 2.Shape (YY/T 0873.2-2014, ISO 6360-2.
2004, IDT)
YY/T 0874 Test methods for rotating instruments in dentistry (YY/T 0874-2013, ISO 8325.2004, IDT)
YY/T 0967 Rods for rotary and reciprocating instruments in dentistry (YY/T 0967-2022, ISO 1797.2017, MOD)
3 Terms and definitions
There are no terms or definitions that require definition in this document.
4 Symbols
The following symbols apply to this document.
d---working part diameter, head diameter;
l1---working part length, head length;
l2---total length;
α --- Working part angle.
5 Requirements
5.1 Materials
5.1.1 Working part
The working parts shall be made of abrasive material. The type of abrasive material and the choice of treatment shall be left to the discretion of the manufacturer.
5.1.2 Rod
The material of the rod should comply with YY/T 0967.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 44469-2024_English be delivered?Answer: Upon your order, we will start to translate GB/T 44469-2024_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 44469-2024_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 44469-2024_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|