|
Std ID |
Description (Standard Title) |
Detail |
|
GB/T 6553-2024
|
Electrical insulating materials used under severe ambient conditions - Test methods for evaluating resistance to tracking and erosion
|
GB/T 6553-2024
|
|
GB/T 13542.4-2024
|
Plastic films for electrical purposes - Part 4: Polyethylene terephthalate films
|
GB/T 13542.4-2024
|
|
GB/T 31034-2024
|
Insulating back sheet for crystalline silicon photovoltaic(PV) modules
|
GB/T 31034-2024
|
|
GB/T 44663-2024
|
Insulating liquids - Unused modified or blended esters for electrotechnical applications
|
GB/T 44663-2024
|
|
GB/T 5132.3-2024
|
Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Round laminated rolled tubes
|
GB/T 5132.3-2024
|
|
GB/T 5132.4-2024
|
Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 4: Round laminated moulded tubes
|
GB/T 5132.4-2024
|
|
GB/T 42733-2023
|
Extruded PTFE sleeving for electrical applications
|
GB/T 42733-2023
|
|
GB/T 42734-2023
|
Non-flame retarded dual wall heat-shrinkable polyolefin sleeving- thick and medium wall
|
GB/T 42734-2023
|
|
GB/T 42735-2023
|
Heat-shrinkable polyolefin sleeving-stress control
|
GB/T 42735-2023
|
|
GB/T 42736-2023
|
Heat-shrinkable semiconductive polyolefin sleeving
|
GB/T 42736-2023
|
|
GB/T 21218-2023
|
Unused silicone insulating liquids for electrotechnical purposes
|
GB/T 21218-2023
|
|
GB/T 15022.10-2023
|
Resin based reactive compounds used for electrical insulation - Part 10: Polyesterimide resin composite
|
GB/T 15022.10-2023
|
|
GB/T 29627.3-2023
|
Aramid pressboard for electrical purposes - Part 3: Specifications for individual materials
|
GB/T 29627.3-2023
|
|
GB/T 5019.13-2023
|
Insulating materials based on mica - Part 13: High thermal conductivity glass-backed mica tape with less resin
|
GB/T 5019.13-2023
|
|
GB/T 5019.5-2023
|
Insulating materials based on mica - Part 5: Rigid mica materials for heating equipment
|
GB/T 5019.5-2023
|
|
GB/T 1303.12-2022
|
Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 12: Typical values
|
GB/T 1303.12-2022
|
|
GB/T 15022.9-2022
|
Resin based reactive compounds used for electrical insulation - Part 9: Resins for cable accessories
|
GB/T 15022.9-2022
|
|
GB/T 20111.6-2022
|
Electrical insulation systems - Procedures for thermal evaluation - Part 6: Multifactor evaluation with increased factors during diagnostic testing
|
GB/T 20111.6-2022
|
|
GB/T 20632.2-2022
|
Vulcanized fibre for electrical purposes - Part 2: Methods of test
|
GB/T 20632.2-2022
|
|
GB/T 20632.3-2022
|
Vulcanized fibre for electrical purposes - Part 3: Flat sheets
|
GB/T 20632.3-2022
|
|
GB/T 21221-2022
|
Insulating liquids - Specifications for unused liquids based on synthetic aromatic hydrocarbons
|
GB/T 21221-2022
|
|
GB/T 41592-2022
|
Mineral insulating oils - Methods for the determination of 2-furfural and related compounds
|
GB/T 41592-2022
|
|
GB/T 41593-2022
|
Extruded silicone resin sleeving
|
GB/T 41593-2022
|
|
GB/T 41631-2022
|
Specification for unused insulating mineral oils for cables with oil ducts
|
GB/T 41631-2022
|
|
GB/T 41632-2022
|
Insulating liquids - Specifications for unused synthetic organic esters for electrical purposes
|
GB/T 41632-2022
|
|
GB/T 41633.2-2022
|
Insulating liquids - Determination of acidity - Part 2: Colourimetric titration
|
GB/T 41633.2-2022
|
|
GB/T 41647-2022
|
Heat- shrinkable polyolefin sleeving for medium voltage joint insulation
|
GB/T 41647-2022
|
|
GB/T 4207-2022
|
Method for the determination of the proof and the comparative tracking indices of solid insulating materials
|
GB/T 4207-2022
|
|
GB/T 5019.10-2022
|
Specification for insulating materials based on mica - Part 10: Mica paper tapes for flame-resistant security cables
|
GB/T 5019.10-2022
|
|
GB/T 13542.5-2022
|
Films used for electrical insulation - Part 5: Balanced biaxially oriented polyethylene naphthalate films
|
GB/T 13542.5-2022
|
|
GB/T 41719-2022
|
Heat-shrinkable sleeving for oil barrier applications
|
GB/T 41719-2022
|
|
GB/T 41720-2022
|
Heat-shrinkable chlorinated polyolefin sleeving
|
GB/T 41720-2022
|
|
GB/T 41633.3-2022
|
Insulating liquids - Determination of acidity - Part 3: Test methods for non-mineral insulating oils
|
GB/T 41633.3-2022
|
|
GB/T 31838.5-2021
|
Solid insulating materials - Dielectric and resistive properties - Part 5: Resistive properties(DC method) - Volume resistance and volume resistivity of impregnation and coating materials
|
GB/T 31838.5-2021
|
|
GB/T 31838.6-2021
|
Solid insulating materials - Dielectric and resistive properties - Part 6: Dielectric properties(AC method) - Relative permittivity and dielectric dissipation factor(frequencies 0.1Hz～10 MHz)
|
GB/T 31838.6-2021
|
|
GB/T 31838.7-2021
|
Solid insulating materials - Dielectric and resistive properties - Part 7: Resistive properties(DC method) - Measurement of volume resistance and volume resistivity at elevated temperatures
|
GB/T 31838.7-2021
|
|
GB/T 13542.2-2021
|
Plastic films for electrical purposes - Part 2: Methods of test
|
GB/T 13542.2-2021
|
|
GB/T 20629.4-2021
|
Non-cellulosic papers for electrical purposes - Part 4: Aramid fibre paper containing mica particles
|
GB/T 20629.4-2021
|
|
GB/T 41146-2021
|
Method of sampling insulating liquids
|
GB/T 41146-2021
|
|
GB/T 20111.5-2020
|
Electrical insulation systems--Procedures for thermal evaluation - Part 5: Applications with a designed life of 5 000 h or less
|
GB/T 20111.5-2020
|
|
GB/T 22578.3-2020
|
Electrical insulation systems(EIS)--Thermal evaluation of combined liquid and solid components - Part 3: Hermetic motor-compressors
|
GB/T 22578.3-2020
|
|
GB/T 29311-2020
|
Electrical insulating materials and systems--AC voltage endurance evaluation
|
GB/T 29311-2020
|
|
GB/T 11026.10-2019
|
Electrical insulation materials -- Thermal endurance properties -- Part 10: Accelerated determination of relative thermal endurance using analytical test methods (RTEA) -- Instructions for calculations based on activation energy
|
GB/T 11026.10-2019
|
|
GB/T 20629.3-2019
|
Non-cellulosic papers for electrical purposes -- Part 3: Unfilled aramid (aromatic polyamide) papers
|
GB/T 20629.3-2019
|
|
GB/T 31838.2-2019
|
Solid insulating materials -- Dielectric and resistive properties -- Part 2: Resistive properties (DC methods) -- Volume resistance and volume resistivity
|
GB/T 31838.2-2019
|
|
GB/T 31838.3-2019
|
Solid insulating materials -- Dielectric and resistive properties -- Part 3: Resistive properties (DC methods) -- Surface resistance and surface resistivity
|
GB/T 31838.3-2019
|
|
GB/T 31838.4-2019
|
Solid insulating materials -- Dielectric and resistive properties -- Part 4: Resistive properties (DC methods) -- Insulation resistance
|
GB/T 31838.4-2019
|
|
GB/T 37659-2019
|
Insulating bonding sheet for laminated busbar
|
GB/T 37659-2019
|
|
GB/T 36289.1-2018
|
Insulating films of crystalline silicon photovoltaic (PV) modules - Part 1: Polyethylene terephthalate films
|
GB/T 36289.1-2018
|
|
GB/T 36289.2-2018
|
Insulating films of crystalline silicon photovoltaic (PV) modules -- Part 2: Fluorine plastic films
|
GB/T 36289.2-2018
|
|
GB/T 23641-2018
|
Fiber reinforced unsaturated polyester moulding compounds (SMC and BMC) for electrical purposes
|
GB/T 23641-2018
|
|
GB/T 26168.1-2018
|
Electrical insulating materials -- Determination of the effects of ionizing radiation -- Part 1: Radiation interaction and dosimetry
|
GB/T 26168.1-2018
|
|
GB/T 26168.2-2018
|
Electrical insulating materials -- Determination of the effects of ionizing radiation -- Part 2: Procedures for irradiation and test
|
GB/T 26168.2-2018
|
|
GB/T 26168.4-2018
|
Electrical insulating materials -- Determination of the effects of ionizing radiation -- Part 4: Procedures for assessment of ageing in service
|
GB/T 26168.4-2018
|
|
GB/T 5591.3-2018
|
Combined flexible materials for electrical insulation -- Part 3: Specifications for individual materials
|
GB/T 5591.3-2018
|
|
GB/T 5591.1-2017
|
Combined flexible materials for electrical insulation -- Part 1: Definitions and general requirements
|
GB/T 5591.1-2017
|
|
GB/T 20139.2-2017
|
Electrical insulation systems -- Thermal evaluation of modifications to an established electrical insulation system (EIS) -- Part 2: Form-wound EIS
|
GB/T 20139.2-2017
|
|
GB/T 1303.5-2017
|
Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 5: Requirements for rigid laminated sheets based on melamine resins
|
GB/T 1303.5-2017
|
|
GB/T 15022.8-2017
|
Resin based reactive compounds used for electrical insulation -- Part 8: Epoxy modified unsaturated polyester vacuum pressure impregnation (VPI) resin
|
GB/T 15022.8-2017
|
|
GB/T 5019.12-2017
|
Specification for insulating materials based on mica -- Part 12: Glass fabric backup epoxy dry mica tape with high porosity
|
GB/T 5019.12-2017
|
|
GB/T 5591.2-2017
|
Combined flexible materials for electrical insulation -- Part 2: Methods of test
|
GB/T 5591.2-2017
|
|
GB/T 15022.7-2017
|
Resin based reactive compounds used for electrical insulation -- Part 7: Epoxy-anhydride vacuum pressure impregnation (VPI) resin
|
GB/T 15022.7-2017
|
|
GB/T 34665-2017
|
Measurement method of dielectric dissipation factor of electric machinery coil/winding insulation
|
GB/T 34665-2017
|
|
GB/T 15022.2-2017
|
Resin based reactive compounds used for electrical insulation -- Part 2: Methods of test
|
GB/T 15022.2-2017
|
|
GB/T 20111.4-2017
|
Electrical insulation systems -- Procedures for thermal evaluation -- Part 4: Selection of the appropriate test method for evaluation and classification of electrical insulation systems
|
GB/T 20111.4-2017
|
|
GB/T 22566-2017
|
Electrical insulating materials and systems -- General method of evaluation of electrical endurance under repetitive voltage impulses
|
GB/T 22566-2017
|
|
GB/T 22578.1-2017
|
Electrical insulation systems (EIS) -- Thermal evaluation of combined liquid and solid components -- Part 1: General requirements
|
GB/T 22578.1-2017
|
|
GB/T 22578.2-2017
|
Electrical insulation system (EIS) -- Thermal evaluation of combined liquid and solid components -- Part 2: Simplified test
|
GB/T 22578.2-2017
|
|
GB/T 23642-2017
|
Electrical insulating materials and systems -- Electrical measurement of partial discharges (PD) under short rise time and repetitive voltage impulses
|
GB/T 23642-2017
|
|
GB/T 31990.5-2017
|
Technical specification for electric power information transmission system on plastic optical fiber -- Part 5: Generic cabling
|
GB/T 31990.5-2017
|
|
GB/T 35679-2017
|
Measuring method for electromagnetic parameters of solid materials at microwave frequencies using waveguide
|
GB/T 35679-2017
|
|
GB/T 11026.3-2017
|
Electrical insulating materials -- Thermal endurance properties -- Part 3: Instructions for calculating thermal endurance characteristics
|
GB/T 11026.3-2017
|
|
GB/T 11026.9-2016
|
Electrical insulating materials -- Thermal endurance properties -- Part 9: Instructions for calculating thermal endurance characteristics using simplified procedures
|
GB/T 11026.9-2016
|
|
GB/T 1408.1-2016
|
Insulating materials -- Test methods for electric strength -- Part 1: Test at power frequencies
|
GB/T 1408.1-2016
|
|
GB/T 1408.2-2016
|
Insulating materials -- Test methods for electric strength -- Part 2: Additional requirements for tests using direct voltage
|
GB/T 1408.2-2016
|
|
GB/T 1408.3-2016
|
Insulating materials -- Test methods for electric strength -- Part 3: Additional requirements for 1.2/50μs impulse tests
|
GB/T 1408.3-2016
|
|
GB/T 20111.2-2016
|
Electrical insulation systems -- Procedures for thermal evaluation -- Part 2: Specific requirements for general-purpose models -- Wire-wound applications
|
GB/T 20111.2-2016
|
|
GB/T 20111.3-2016
|
Electrical insulation systems -- Procedures for thermal evaluation -- Part 3: Specific requirements for encapsulated-coil model -- Wire-wound electrical insulation system (EIS)
|
GB/T 20111.3-2016
|
|
GB/T 20139.1-2016
|
Electrical insulation systems -- Thermal evaluation of modifications to an established electrical insulation system (EIS) -- Part 1: Wire-wound winding EIS
|
GB/T 20139.1-2016
|
|
GB/T 11026.1-2016
|
Electrical insulating materials -- Thermal endurance properties -- Part 1: Ageing procedures and evaluation of test results
|
GB/T 11026.1-2016
|
|
GB/T 20111.1-2015
|
Electrical insulation systems -- Procedures for thermal evaluation -- Part 1: General requirements -- Low-voltage
|
GB/T 20111.1-2015
|
|
GB/T 20112-2015
|
Evaluation and qualification of electrical insulation systems
|
GB/T 20112-2015
|
|
GB/T 21223.1-2015
|
Guide for the statistical analysis of ageing test data -- Part 1: Methods based on mean values of normally distributed test results
|
GB/T 21223.1-2015
|
|
GB/T 21223.2-2015
|
Guide for the statistical analysis of ageing test data -- Part 2: Validation of procedures for statistical analysis of censored normally distributed data
|
GB/T 21223.2-2015
|
|
GB/T 31838.1-2015
|
Solid insulating materials -- Dielectric and resistive properties -- Part 1: General
|
GB/T 31838.1-2015
|
|
GB/T 31990.1-2015
|
Technical specification for electric power information transmission system on plastic optical fiber -- Part 1: Technical requirements
|
GB/T 31990.1-2015
|
|
GB/T 31990.2-2015
|
Technical specification for electric power information transmission system on plastic optical fiber -- Part 2: Transceiver communication unit
|
GB/T 31990.2-2015
|
|
GB/T 31990.3-2015
|
Technical specification for electric power information transmission system on plastic optical fiber -- Part 3: Optical transceiver module
|
GB/T 31990.3-2015
|
|
GB/T 10580-2015
|
Standard conditions for use prior to and during the testing of solid electrical insulating materials
|
GB/T 10580-2015
|
|
GB/T 5019.5-2014
|
Insulating materials based on mica -- Part 5: Rigid mica materials for heating equipment
|
GB/T 5019.5-2014
|
|
GB/T 11026.7-2014
|
Electrical insulating materials -- Thermal endurance properties -- Part 7: Determination of relative thermal endurance index (RTE) of insulating material
|
GB/T 11026.7-2014
|
|
GB/T 11026.8-2014
|
Electrical insulating materials -- Thermal endurance properties -- Part 8: Determination of thermal endurance indices (TI and RTE) of an insulating material using the fixed time frame method
|
GB/T 11026.8-2014
|
|
GB/T 15022.6-2014
|
Resin based reactive compounds for electrical insulation -- Part 6: Epoxy casting resinous compounds use for class 1E distribution transformer in nuclear power generating stations
|
GB/T 15022.6-2014
|
|
GB/T 1981.6-2014
|
Varnishes used for electrical insulation -- Part 6: Environment-friendly water or emulsion based impregnating varnishes
|
GB/T 1981.6-2014
|
|
GB/T 30546-2014
|
Suitability of typical electrical insulating material (EIM) for polymer recycling
|
GB/T 30546-2014
|
|
GB/T 31034-2014
|
Insulating back sheet for crystalline silicon terrestrial photovoltaic (PV) modules
|
GB/T 31034-2014
|
|
GB/T 31134-2014
|
Fiber reinforced epoxy powder moulding compounds (EP-PMC) for electrical purposes
|
GB/T 31134-2014
|
|
GB/T 31135-2014
|
Fiber reinforced unsaturated polyester powder moulding compounds (UP-PMC) for electrical purposes
|
GB/T 31135-2014
|
|
GB/T 6553-2014
|
Electrical insulating materials used under severe ambient conditions -- Test methods for evaluating resistance to tracking and erosion
|
GB/T 6553-2014
|
|
GB/T 7113.1-2014
|
Flexible insulating sleeving -- Part 1: Definitions and general requirements
|
GB/T 7113.1-2014
|