|
US$614.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 21223.1-2015: Guide for the statistical analysis of ageing test data -- Part 1: Methods based on mean values of normally distributed test results
Status: Valid GB/T 21223.1: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 21223.1-2015 | English | 614 |
Add to Cart
|
4 days [Need to translate]
|
Guide for the statistical analysis of ageing test data -- Part 1: Methods based on mean values of normally distributed test results
| Valid |
GB/T 21223.1-2015
|
| GB/T 21223-2007 | English | 639 |
Add to Cart
|
3 days [Need to translate]
|
Statistical analysis of the aging test data to create a method based on mean values ??of the test results of the normal distribution
| Obsolete |
GB/T 21223-2007
|
PDF similar to GB/T 21223.1-2015
Basic data | Standard ID | GB/T 21223.1-2015 (GB/T21223.1-2015) | | Description (Translated English) | Guide for the statistical analysis of ageing test data -- Part 1: Methods based on mean values of normally distributed test results | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | K15 | | Classification of International Standard | 29.035.01 | | Word Count Estimation | 31,342 | | Date of Issue | 2015-07-03 | | Date of Implementation | 2016-02-01 | | Older Standard (superseded by this standard) | GB/T 21223-2007 | | Adopted Standard | IEC 60493-1-2011, IDT | | Regulation (derived from) | National Standard Announcement 2015 No.22 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This Standard specifies the statistical methods used to analyze and evaluate the results of aging data. This Standard includes the establishment of an average normal test results on the basis of numerical methods. These methods are only in the test data to comply with specific assumptions and mathematical laws of physics when effective. This Standard also gives a number of statistical tests on the validity of certain assumptions. This Standard applies to the complete set of data and censored data set. This Standard specifies a data sub-set of data processing based on the concept of the program. References [1] pointed out that the effectiveness of the process used in the calculation of statistical parameters derived data set of coefficients. | GB/T 21223.1-2015: Guide for the statistical analysis of ageing test data -- Part 1: Methods based on mean values of normally distributed test results
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Guide for the statistical analysis of ageing test data Part 1. Methods based on mean values \u200b\u200bof normally distributed test results
ICS 29.035.01
K15
National Standards of People's Republic of China
Replacing GB/T 21223-2007
Aging test statistical analysis Guide
Part 1. the establishment of normal distribution of test results
The method based on the average
Part 1. Methodsbasedonmeanvaluesofnormalydistributedtestresults
(IEC 60493-1.2011, IDT)
Issued on. 2015-07-03
2016-02-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Preface Ⅰ
Introduction Ⅱ
1 Scope 1
2 terms, definitions and symbols 1
2.1 Terms and Definitions 1
2.2 Symbols 2
3 Calculation Program 4
3.1 General considerations 4
Single sub-group difference 3.2 --- average and the exact value of 4
3.3 difference average two subgroups --- 5
3.4 --- two or more sub-groups analysis of variance 6
3.5 three or more sub-groups --- regression analysis 7
Appendix A (informative) Statistical Background 11
Annex B (informative) statistics list 14
Appendix NA (informative) of this section and GB/T 21223-2007 changes in the structure and content compared to 25
References 26
Foreword
GB/T 21223 "aging test statistical analysis Guide" includes the following two parts.
--- Part 1. based on mean values \u200b\u200bof normally distributed test results on the way;
--- Part 2. cut normal statistical analysis of data verification.
This is Part 1 GB/T 21223 of.
This section drafted in accordance with GB/T 1.1-2009 given rules.
This Part replaces GB/T 21223-2007 "aging test data analysis guidelines establish normal test results in a flat
The method "based on the average, compared with the GB/T 21223-2007, the main technical changes are as follows.
--- Modify the standard name will be changed to the original sub-standard part of the standard;
--- Increasing the "Introduction";
--- Remove the "Normative references" (see the 2007 edition of Chapter 2);
--- Added "terms" (see Chapter 3);
--- Revised Appendix A, and as a Table 1 in this section (see Table 1, 2007 edition of Appendix A);
--- Deleted the Chapter 3, "Overview" (see the 2007 edition of Chapter 3);
--- Revised Chapter 4, "Statistical Methods" (see Chapter 3, Chapter 4 of the 2007 edition);
--- Removed Figures 1, 2 and 3 (see the 2007 version of Figures 1, 2 and 3);
--- Added Appendix A, Appendix B (see Appendix A, Appendix B);
--- Increase the informative appendix NA, listed in this section with the GB/T 21223-2007 standard reg control (see appendix NA).
This section uses the translation method is equivalent to using IEC 60493-1.2011 "aging test statistical analysis Guide - Part 1. Create positive
The method of "mean normal distribution based on the test results. And IEC 60493-1.2011 as compared to, for ease of use criteria, do the following editor
Modifications.
--- Deleted Chapter 2 normative references, other clauses No. postponed;
--- Increase the informative appendix NA.
This part is proposed by the China Electrical Equipment Industrial Association.
This part of the National Electrical insulation materials and insulation systems assessment Standardization Technical Committee (SAC/TC301) centralized.
This section is drafted. Electrical Machinery Industry Beijing Technology and Economy Institute, Suzhou Jufeng Electrical Insulation Systems Co., Ltd., Cooper
Electronic Technology (Shanghai) Co., Ltd. Guilin Electric Apparatus Research Institute.
The main drafters of this section. Liu Yali, Hao Chen, Xia Yu, Yin Hang, Rui, Yu Long Ying.
This standard replaces the standards previously issued as follows.
--- GB/T 21223-2007.
Introduction
Test procedures for aging properties estimation procedure is described in detail; a particular environmental stress (such as temperature, radiation, and partial discharge) under aging
General document also covers the test procedure in this section of the book.
In many cases, a particular performance as a function of time for different aging under stress to be measured, and find selected at each arrival aging stress
Standard end expiration time. This failure time and aging stress diagram can be used to obtain exposure to similar stress predetermined sample failure
Estimates of time, or to obtain a predetermined value will cause the failure stress estimated time.
Physical and chemical laws of aging could always control the introduction of such an assumption, such as stress at a fixed age, is the assessment of
Between aging time and energy, or a certain mathematical properties of functions (such as square root or logarithmic) and there is a linear relationship between the aging time. Similarly, in
Failure between stress and aging time, or there may be a linear relationship between mathematical function of these variables.
This section describes a suitable method for the linear relationship. Solid columns illustrate the method by thermal aging, which may be simple chemical process
Is assumed to be degraded obey Arrhenius law, it is simply the number of dead time is a linear function of the inverse of the thermodynamic temperature.
This section provides procedures to calculate under normal inspection data. We shall not test data normality, because the test is available to small
Sample set of data is not credible. However, this method of distribution under normality has been the case over the long-term results and not all inspection data
use.
Aging test statistical analysis Guide
Part 1. the establishment of normal distribution of test results
The method based on the average
1 Scope
GB/T 21223 provisions of this part of the statistical methods used to analyze and evaluate the results of aging data.
This section includes based on mean values \u200b\u200bof normally distributed test results on numerical methods. These methods only in compliance with the test data
Specific assumptions mathematics and the laws of physics when effective. This section also provides some statistical tests on the validity of certain assumptions
method.
This section applies to the complete data set and censored data set.
This section provides a subset of data processing based on the concept of the program data. References [1] indicates the push for calculation
Statistical validity of the export parameter data set of coefficients.
2 terms, definitions and symbols
2.1 Terms and Definitions
The following terms and definitions apply to this document.
2.1.1
Ordered data ordereddata
According to a set of data in order, from the appropriate direction, the column data in each equal to or greater than the previous one.
Note. in this section, "Ascending" indicates that the data to the first data is the smallest in this way arrangement.
2.1.2
Order statistics order-statistic
Each individual value in an ordered set of data called order statistics, with its numerical position in the sequence is represented.
2.1.3
Incomplete data incompletedata
Values \u200b\u200babove and (or) below a specified point is unknown ordered data.
2.1.4
Censored data censoreddata
The number of unknown value is known incomplete data.
Note. If the above start at a predetermined value or below censored, belong to the class Ⅰ censored; if Censored starts at a predetermined amount above or below the order statistics
It belongs to the class Ⅱ Censored. This section relates only to Class Ⅱ Censored.
2.1.5
Truncated data truncateddata
The number of unknown value is unknown incomplete data.
Note. This section does not involve the truncated data.
2.1.6
Saw coefficient Sawcoefficient
Coefficients to calculate a list of groups of primary statistical functions required by the invention JGSaw.
Note. in this section there are four factors. Saw coefficient was originally defined as the fifth, for estimating the variance of [7].
|