|
Std ID |
Description (Standard Title) |
Detail |
|
GB/T 20140-2016
|
Measurement Method and Evaluation criteria of Dynamic Characteristic and Vibration on Stator End Windings of Cylindrical Synchronous Generators
|
GB/T 20140-2016
|
|
GB/T 20835-2016
|
Guides for Magnetization Test of Generator Stator Core
|
GB/T 20835-2016
|
|
GB/T 17948.4-2016
|
Rotating electrical machines -- Functional evaluation of insulation systems -- Test procedures for form-wound windings -- Evaluation by electrical endurance
|
GB/T 17948.4-2016
|
|
GB/T 17948.5-2016
|
Rotating electrical machines -- Functional evaluation of insulation systems -- Test procedures for form-wound windings -- Multifactor evaluation by endurance under simultaneous thermal and electrical stresses
|
GB/T 17948.5-2016
|
|
GB/T 17948.7-2016
|
Rotating electrical machines -- Functional evaluation of insulation systems -- General guidelines
|
GB/T 17948.7-2016
|
|
GB/T 20833.1-2016
|
Rotating electrical machines -- The stator winding insulation of rotating electrical machines -- Part 1: Off-line partial discharge measurements
|
GB/T 20833.1-2016
|
|
GB/T 20833.2-2016
|
Rotating electrical machines -- The stator winding insulation of rotating electrical machines -- Part 2: On-line partial discharge measurements
|
GB/T 20833.2-2016
|
|
GB/T 21210-2016
|
Starting performance of single-speed three-phase cage induction motors
|
GB/T 21210-2016
|
|
GB/T 22715-2016
|
Impulse voltage withstand levels of form-wound stator coils for rotating a.c. machines
|
GB/T 22715-2016
|
|
GB/T 4831-2016
|
Specification for model of rotating electrical motor
|
GB/T 4831-2016
|
|
GB/T 5171.21-2016
|
Small power motors - Part 21: General test methods
|
GB/T 5171.21-2016
|
|
GB/T 20834-2014
|
Fundamental technical specifications for generator-motor
|
GB/T 20834-2014
|
|
GB/T 30944-2014
|
Guide for energy losses calculation of small hydropower grid
|
GB/T 30944-2014
|
|
GB/T 30951-2014
|
Scrap conditions about electrical and mechanical equipment of small-scale hydropower station
|
GB/T 30951-2014
|
|
GB/T 5171.1-2014
|
Small power motors - Part 1: General technical requirements
|
GB/T 5171.1-2014
|
|
GB/T 29326-2012
|
Selection of energy-efficient motors including variable speed applications -- Application guide
|
GB/T 29326-2012
|
|
GB/T 25090-2010
|
Step-down power saving device for asynchronous motor at light load
|
GB/T 25090-2010
|
|
GB/T 25292-2010
|
Specification for direct current machine in ships
|
GB/T 25292-2010
|
|
GB/T 25442-2010
|
Standard methods for determining losses and efficiency of rotating electrical machines from tests (excluding machines for traction vehicles)
|
GB/T 25442-2010
|
|
GB/T 756-2010
|
Cylindrical shaft extension for rotating electrical machines
|
GB/T 756-2010
|
|
GB/T 757-2010
|
Conical shaft extension for rotating electrical machines
|
GB/T 757-2010
|
|
GB/T 23640-2009
|
AC generators for reciprocating internal combustion (RIC) engine driven generating sets
|
GB/T 23640-2009
|
|
GB/T 12665-2008
|
Requirements of damp-heat testing of electrical machine for service in general environmental condition
|
GB/T 12665-2008
|
|
GB/T 22719.1-2008
|
Interturn insulation of random-wound winding for AC low-voltage electrical machines -- Part 1: Test methods
|
GB/T 22719.1-2008
|
|
GB/T 22719.2-2008
|
Interturn insulation of random-wound winding for AC low-voltage electrical machines -- Part 2: Test limits
|
GB/T 22719.2-2008
|
|
GB/T 12351-2008
|
Environmental technical requirements of rotating electric machines for tropical use
|
GB/T 12351-2008
|
|
GB/T 13002-2008
|
Rotating electrical machines -- Thermal protection
|
GB/T 13002-2008
|
|
GB/T 22670-2008
|
Test procedures for converter-fed three phase cage induction motors
|
GB/T 22670-2008
|
|
GB/T 22672-2008
|
Test procedures for small power synchronous motors
|
GB/T 22672-2008
|
|
GB/T 22714-2008
|
Test specifications of interturn insulation of form-wound winding for AC low-voltage electrical machines
|
GB/T 22714-2008
|
|
GB/T 22715-2008
|
Impulse voltage withstand levels of form-wound stator coils for rotating a.c. machines
|
GB/T 22715-2008
|
|
GB/T 22717-2008
|
Test specifications of interturn insulation of field pole coil and field winding for electrical machines
|
GB/T 22717-2008
|
|
GB/T 22718-2008
|
Thermal evaluation methods of insulation systems for high-voltage electrical machines
|
GB/T 22718-2008
|
|
GB/T 22720.1-2008
|
Rotating electrical machines -- Qualification and type tests for Type Ⅰ electrical insulation systems used in rotating electrical machines fed from voltage converters
|
GB/T 22720.1-2008
|
|
GB/T 22722-2008
|
Specification for YX3 series (IP55) high efficiency three-phase induction motor (frame size 80-355)
|
GB/T 22722-2008
|
|
GB/T 2900.25-2008
|
Electrotechnical terminology -- Rotating electrical machines
|
GB/T 2900.25-2008
|
|
GB/T 7060-2008
|
General specifications for rotary electrical machines in ships
|
GB/T 7060-2008
|
|
GB/T 997-2008
|
Rotating electrical machines -- Classification of types of construction, mounting arrangements and terminal box position (IM Code)
|
GB/T 997-2008
|
|
GB/T 17948.5-2007
|
Rotating electrical machines -- Functional evaluation of insulation systems -- Test procedures for form-wound windings -- Multifactor functional evaluation -- Endurance under combined thermal and electrical stresses of insulation systems used in machines
|
GB/T 17948.5-2007
|
|
GB/T 17948.6-2007
|
Rotating electrical machine -- Functional evaluation of insulation systems -- Test procedures for form-wound windings -- Evaluation of thermomechanical endurance of insulation systems
|
GB/T 17948.6-2007
|
|
GB/T 20833-2007
|
The guide for partial discharge measurements and evaluation on stator bar and winding insulation of rotating machinery
|
GB/T 20833-2007
|
|
GB/T 20834-2007
|
Basic technical conditions of the generator / motor
|
GB/T 20834-2007
|
|
GB/T 20835-2007
|
Guides for magnetic test of generator stator core
|
GB/T 20835-2007
|
|
GB/T 21205-2007
|
Specification for the refurbishing of rotating electrical machines
|
GB/T 21205-2007
|
|
GB/T 21209-2007
|
Guide for the design and performance of cage induction motors specifically designed for converter supply
|
GB/T 21209-2007
|
|
GB/T 21210-2007
|
Starting performance of single-speed three-phase cage induction motors
|
GB/T 21210-2007
|
|
GB/T 10069.1-2006
|
Measurement of airborne noise emitted by rotating electrical machines and the noise limits -- Part 1: Method for the measurement of airborne noise emitted by rotating electrical machines
|
GB/T 10069.1-2006
|
|
GB/T 17948.2-2006
|
Functional evaluation of insulation systems for rotating electrical machines -- Test procedures for wire-wound windings -- Classification of changes and insulation component substitutions
|
GB/T 17948.2-2006
|
|
GB/T 17948.3-2006
|
Functional evaluation of insulation systems for rotating electrical machines -- Test procedures for form-wound windings -- Thermal evaluation and classification of insulation systems used in machines up to and including 50 MVA and 15 kV
|
GB/T 17948.3-2006
|
|
GB/T 17948.4-2006
|
Functional evaluation of insulation systems for rotating electrical machines -- Test procedures for form-wound windings -- Electrical evaluation of insulation systems used in machines up to and including 50MVA and 15kV
|
GB/T 17948.4-2006
|
|
GB/T 20137-2006
|
Method for determining losses and efficiency of three-phase cage induction motors
|
GB/T 20137-2006
|
|
GB/T 20140-2006
|
Dynamic characteristic and vibration measurement method of turbo-generators on stator windings and evaluation criteria
|
GB/T 20140-2006
|
|
GB/T 20160-2006
|
Recommended practice for testing insulation resistance of rotating machinery
|
GB/T 20160-2006
|
|
GB/T 4942.1-2006
|
Degrees of protection provided by the integral design of rotating electrical machines (IP code) -- Classification
|
GB/T 4942.1-2006
|
|
GB/T 1032-2005
|
Three-phase asynchronous motor test methods
|
GB/T 1032-2005
|
|
GB/T 5321-2005
|
Measurement of loss and efficiency for electrical machine by the calorimetric method
|
GB/T 5321-2005
|
|
GB/T 17948-2003
|
Functional evaluation of insulation systems for rotating electrical machines -- General guidelines
|
GB/T 17948-2003
|
|
GB/T 755.2-2003
|
Methods for determining losses and efficiency of rotating electrical machinery from tests (excluding machines for traction vehicles)
|
GB/T 755.2-2003
|
|
GB/T 997-2003
|
Classification of types of construction and mounting arrangements for rotating electrical machines (IM code)
|
GB/T 997-2003
|
|
GB/T 5171-2002
|
General technical conditions of small power motors
|
GB/T 5171-2002
|
|
GB/T 4942.1-2001
|
Classification of degrees of protection provided by enclosures of rotating electrical machines (IP code)
|
GB/T 4942.1-2001
|
|
GB/T 17948.1-2000
|
Rotating electrical machines. Functional evaluation of insulation systems. Test procedures for wire-wound windings. Thermal evaluation and classification
|
GB/T 17948.1-2000
|
|
GB/T 4772.1-1999
|
Dimensions and output series for rotating electrical machines. Part 1: Frame numbers 56 to 400 and flange numbers 55 to 1 080
|
GB/T 4772.1-1999
|
|
GB/T 4772.2-1999
|
Dimensions and output series for rotating electrical machines. Part 2: Frame numbers 355 to 1 000 and flange numbers 1 180 to 2 360
|
GB/T 4772.2-1999
|
|
GB/T 4772.3-1999
|
Dimensions and output series for rotating electrical machines. Part 3: Samll built-in motors. Flange numbers BF10 to BF50
|
GB/T 4772.3-1999
|
|
GB/T 12973-1995
|
Terms relating to coal petrology
|
GB/T 12973-1995
|
|
GB/T 1993-1993
|
Cooling methods for rotating electrical machines
|
GB/T 1993-1993
|
|
GB/T 757-1993
|
Conical snaft extension for rotating electrical machines
|
GB/T 757-1993
|
|
GB/T 13599-1992
|
Built-in thermal protection for rotation electrical machines--Thermal detectors and control units used in thermal protection systems
|
GB/T 13599-1992
|
|
GB/T 12973-1991
|
Dimensions for commutators and slip-rings
|
GB/T 12973-1991
|
|
GB/T 13002-1991
|
Built-in thermal protection for rotating electrical machines. Rules for protection of rotating electrical machines
|
GB/T 13002-1991
|
|
GB/T 5171-1991
|
General technical requirements for small power motors
|
GB/T 5171-1991
|
|
GB/T 12351-1990
|
Enviromental technical requirements of rotating electric machines for tropical use
|
GB/T 12351-1990
|
|
GB/T 12665-1990
|
Requirements of damp-heat testing of electrical machine for service in general environmental condition
|
GB/T 12665-1990
|
|
GB/T 756-1990
|
Cylindrical shaft extension for rotating electrical machines
|
GB/T 756-1990
|
|
GB/T 10585-1989
|
Fundamental requirements of excitation systems medium and small synchronous machines
|
GB/T 10585-1989
|
|
GB/T 10068.1-1988
|
Measurement evaluation and limits of the vibration severity of rotating electrical machinery--Measurement of mechanical vibration
|
GB/T 10068.1-1988
|
|
GB/T 10069.1-1988
|
Measurement of airborne noise emitted by rotating electrical machinery and the noise limits--Engineering method for the measurement of airborne noise
|
GB/T 10069.1-1988
|
|
GB/T 10069.2-1988
|
Measurement of dirborne noise emitted by rotating electrical machinery and the noise limits--Survey method for the measurement of airborne noise
|
GB/T 10069.2-1988
|
|
GB/T 755-1987
|
General requirements for rotating electrical machines
|
GB/T 755-1987
|
|
GB/T 5321-1985
|
Measurement of loss and efficiency for large AC electrical machines by the calorimetric method
|
GB/T 5321-1985
|
|
GB/T 4772.1-1984
|
Dimensions and tolerances for rotating electrical machines--Machines with frame numbers 36 to 400 and flange numbers FF55 to FF1080 or FT55 to FT1080
|
GB/T 4772.1-1984
|
|
GB/T 4772.2-1984
|
Dimensions and tolerances for rotating electrical machines--Machines with frame numbers 355 to 1000
|
GB/T 4772.2-1984
|
|
GB/T 4772.3-1984
|
Dimensions and tolerances for rotating electrical machines--Small built-in motors with flange numbers BF10 to BF50
|
GB/T 4772.3-1984
|
|
GB/T 4831-1984
|
Specification for model of rotating electrical machines
|
GB/T 4831-1984
|
|
GB/T 997-1981
|
Symbols for types of construction and mounting arrangements of rotating electrical machinery
|
GB/T 997-1981
|
|
GB/T 32672-2016
|
General technical specification of power demand response system
|
GB/T 32672-2016
|
|
GB/T 14898-1994
|
Graphite for making synthetic diamond
|
GB/T 14898-1994
|
|
GB/T 22673-2008
|
Natural graphite brush for rotating electrical machinery -- Basic characteristics
|
GB/T 22673-2008
|
|
GB/T 14898-2004
|
Graphite for making synthetic diamond
|
GB/T 14898-2004
|
|
GB/T 1994-1989
|
Coke--Sampling and preparation of samples
|
GB/T 1994-1989
|
|
GB/T 46134-2025
|
Natural esters - Guidelines for maintenance and use in electrical equipment
|
GB/T 46134-2025
|
|
GB/T 46180-2025
|
Test method on electrical insulation performance of superconducting magnet made from CICC
|
GB/T 46180-2025
|
|
GB/T 11026.3-2025
|
(Electrical insulating materials - Thermal endurance properties - Part 3: Instructions for calculating thermal endurance characteristics)
|
GB/T 11026.3-2025
|
|
GB/T 11026.7-2025
|
(Electrical insulating materials - Thermal endurance properties - Part 7: Determination of relative temperature index (RTI) of an insulating material)
|
GB/T 11026.7-2025
|
|
GB/T 11026.8-2025
|
(Electrical insulating materials - Thermal endurance properties - Part 8: Determination of thermal endurance indices (TI and RTI) of an insulating material using the fixed time frame method)
|
GB/T 11026.8-2025
|
|
GB/T 45942-2025
|
Mineral oil-filled electrical equipment - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment
|
GB/T 45942-2025
|
|
GB/T 5019.4-2025
|
Insulating materials based on mica - Part 4: Mica paper
|
GB/T 5019.4-2025
|
|
GB/T 31838.8-2024
|
Solid insulating materials - Dielectric and resistive properties - Part 8: Determination of dielectric properties(AC method) - Relative permittivity and dielectric dissipation factor(frequencies 1 MHz~300 MHz)
|
GB/T 31838.8-2024
|
|
GB/T 44378-2024
|
Insulating liquids - Methods for counting and sizing particles
|
GB/T 44378-2024
|