|
Std ID |
Description (Standard Title) |
|
GB/T 35547-2017
|
Rural fire department
|
|
GB/T 29175-2012
|
Fire emergency rescue -- Guidelines for technical training
|
|
GB/T 29176-2012
|
Fire emergency rescue -- General rules
|
|
GB/T 29177-2012
|
Fire emergency rescue -- Requirements for training facilities
|
|
GB/T 29178-2012
|
Fire emergency rescue -- Guidelines for equipment allocation
|
|
GB/T 29179-2012
|
Fire emergency rescue -- Code of practice for operation
|
|
GB/T 20702-2006
|
Test method for extinguishing property of gaseous extinguishing agent
|
|
GB/T 803-1989
|
Determination of explosion indices of combustible gases in air
|
|
GB/T 44481-2024
|
Technical specification for inspection and testing of building fire protection facilities
|
|
GB/T 41480-2022
|
Smoke leakage tests for door and shutter assemblies
|
|
GB/T 9978.2-2019
|
Fire Resistance Tests -- Elements of building construction -- Part 2: Guidance on measuring uniformity of furnace exposure on test samples
|
|
GB/T 25206.1-2014
|
Reaction-to-fire tests for sandwich panel building systems -- Part 1: Test method for small rooms
|
|
GB/T 18294.1-2013
|
Technical identification methods for fire -- Part 1: Ultraviolet spectrometry
|
|
GB/T 24572.5-2013
|
Standard practice for separation and concentration of ignitable liquid residues from fire debris samples -- Part 5: Purge and trap concentration
|
|
GB/T 16840.5-2012
|
Technical determination methods for electrical fire evidence -- Part 5: Method of recognizing and collecting the physical evidence of electrical fire
|
|
GB/T 16840.6-2012
|
Technical determination methods for electrical fire evidence -- Part 6: Micro-morphological analysis method using scanning electron microscope
|
|
GB/T 18294.6-2012
|
Technical identification methods for fire -- Part 6: Infrared spectroscopy analysis
|
|
GB/T 28752-2012
|
Test method for lateral spread of flame on building and transport products in vertical configuration
|
|
GB/T 29180.2-2012
|
The investigative methods and procedures for electrical fire -- Part 2: Methods for dissolution and separation of physical evidence
|
|
GB/T 29416-2012
|
Test method for fire-resistant performance of external wall insulation systems applied to building facades
|
|
GB/T 26784-2011
|
Fire resistance test for elements of building construction -- Alternative and additional procedures
|
|
GB/T 27902-2011
|
Technical rules for electrical fire simulation experiment
|
|
GB/T 27903-2011
|
Fire resistance test for lift landing doors -- Methods of measuring integrity, thermal insulation and heat flux
|
|
GB/T 27905.2-2011
|
Inspection methods for trace and physical evidences from fire scene -- Part 2: Sheet glass
|
|
GB/T 27905.3-2011
|
Inspection methods for trace and physical evidences from fire scene -- Part 3: Ferrous metalwork
|
|
GB/T 27905.4-2011
|
Inspection methods for trace and physical evidences from fire scene -- Part 4: Electrical wire
|
|
GB/T 27905.5-2011
|
Inspection methods for trace and physical evidences from fire scene -- Part 5: Small power induction motor
|
|
GB/T 13347-2010
|
Flame arresters for petroleum gas pipeline systems
|
|
GB/T 18294.2-2010
|
Technical identification methods for fire -- Part 2: Thin layer chromatography analysis
|
|
GB/T 18294.5-2010
|
Technical identification methods for fire -- Part 5: Gas chromatography-mass spectrometry analysis
|
|
GB/T 25206.2-2010
|
Reaction-to-fire tests for sandwich panel building systems -- Part 2: Test method for large rooms
|
|
GB/T 25207-2010
|
Fire tests -- Full-scale room test for surface products
|
|
GB/T 5464-2010
|
Non-combustibility test method for building materials
|
|
GB/T 14656-2009
|
Test method for burning behavior of flame-retardant paper and board
|
|
GB/T 17428-2009
|
Fire resistance test methods of ventilation ducts
|
|
GB/T 24572.1-2009
|
Standard practice for separation and concentration of ignitable liquid residues from fire debris samples -- Part 1: Solvent extraction
|
|
GB/T 24572.2-2009
|
Standard practice for separation and concentration of ignitable liquid residues from fire debris samples -- Part 2: Direct headspace vapors sampling
|
|
GB/T 24572.3-2009
|
Standard practice for separation and concentration of ignitable liquid residues from fire debris samples -- Part 3: Activated charcoal absorption
|
|
GB/T 24572.4-2009
|
Standard practice for separation and concentration of ignitable liquid residues from fire debris samples -- Part 4: Solid phase microextraction (SPME)
|
|
GB/T 24573-2009
|
Fire resistance tests for vault and file room doors
|
|
GB/T 16840.1-2008
|
Technical determination method for electrical fire evidence -- Part 1: Macroscopic method
|
|
GB/T 7633-2008
|
Fire resistance tests -- Door and shutter assemblies
|
|
GB/T 9978.1-2008
|
Fire-resistance tests -- Elements of building construction -- Part 1: General requirements
|
|
GB/T 9978.3-2008
|
Fire-resistance tests -- Elements of building construction -- Part 3: Commentary on test method and test data application
|
|
GB/T 9978.4-2008
|
Fire-resistance tests -- Elements of building construction -- Part 4: Specific requirements for loadbearing vertical separating elements
|
|
GB/T 9978.5-2008
|
Fire-resistance tests -- Elements of building construction -- Part 5: Specific requirements for loadbearing horizontal separating elements
|
|
GB/T 9978.6-2008
|
Fire-resistance tests -- Elements of building construction -- Part 6: Specific requirements for beams
|
|
GB/T 9978.7-2008
|
Fire-resistance tests -- Elements of building construction -- Part 7: Specific requirements for columns
|
|
GB/T 9978.8-2008
|
Fire-resistance tests -- Elements of building construction -- Part 8: Specific requirements for non-loadbearing vertical separating elements
|
|
GB/T 9978.9-2008
|
Fire-resistance tests -- Elements of building construction -- Part 9: Specific requirements for non-loadbearing ceiling elements
|
|
GB/T 18294.4-2007
|
Technical identification method for fire -- Part 4: High performance liquid chromatography analysis
|
|
GB/T 12513-2006
|
Fire-resistance tests -- Elements of building construction -- Glazed elements
|
|
GB/T 16810-2006
|
Tests and requirements for fire resistance of record protection containers
|
|
GB/T 18294.3-2006
|
Technical identification method for fire -- Part 3: Gas chromatography analysis
|
|
GB/T 20162-2006
|
Method for collection of physical evidence for fire technical identification
|
|
GB/T 18294.1-2001
|
Technical identification method for fire -- Part 1: Ultraviolet spectrum analysis
|
|
GB/T 15929-1995
|
Determination of the minimum ignition energy of dust cloud. A method of dust-falling for double-deck shaking sieve (integrated calculation of energy)
|
|
GB/T 12513-1990
|
Fire-resistance tests--Glazed elements
|
|
GB/T 7633-1987
|
Fire resistance test method of door and shutter assemblies
|
|
GB/T 7634-1987
|
Petroleum and related products--Determination of lower flashpoint--Rapid equilibrium method
|
|
GB/T 5464-1985
|
Non-combustibility test method of building materials
|
|
GB/T 45839-2025
|
General technical requirements for networking of self-contained fire detection and alarm devices
|
|
GB/T 46261-2025
|
General technical requirements for fire monitoring and warning systems for electrochemical energy storage stations
|
|
GB/T 16838-2021
|
Environmental test and severities for fire electronic products
|
|
GB/T 38254-2019
|
Automatic control device for fire alarm receiving and dispatching system
|
|
GB/T 38315-2019
|
Guidelines for preparation and implementation of firefighting and emergency evacuation plans for workplaces
|
|
GB/T 26875.7-2015
|
Remote-monitoring system of urban fire protection -- Part 7: Functional requirements for maintenance and management software for building fire facilities
|
|
GB/T 26875.8-2015
|
Remote-monitoring system of urban fire protection -- Part 8: External data exchange protocol for monitoring center
|
|
GB/T 26875.3-2011
|
Remote-monitoring system of urban fire protection -- Part 3: Communication protocol for alarm transmission network
|
|
GB/T 26875.4-2011
|
Remote-monitoring system of urban fire protection -- Part 4: Basic data item
|
|
GB/T 21197-2007
|
Linear fiber optic heat detectors
|
|
GB/T 4718-2006
|
Vocabulary used in fire alarm equipment
|
|
GB/T 14288-1993
|
Determination of minimum ignition energy of combustible gases and flammable liquid vapors
|
|
GB/T 16840.2-2021
|
Technical determination methods for electrical fire evidence - Part 2: Residual magnetism method
|
|
GB/T 16840.3-2021
|
Technical determination methods for electrical fire evidence - Part 3: Auger electron spectroscopy component analytic method
|
|
GB/T 16840.4-2021
|
Technical determination methods for electrical fire evidence - Part 4: Metallographic analysis method
|
|
GB/T 16840.7-2021
|
Technical determination methods for electrical fire evidence - Part 7: Component analytic method of energy dispersive spectrometry
|
|
GB/T 16840.8-2021
|
Technical determination methods for electrical fire evidence - Part 8: Method of thermal analysis
|
|
GB/T 41382-2022
|
Fire tests - Open calorimetry - Measurement of the rate of production of heat and combustion products for fires of up to 40MW
|
|
GB/T 40237-2021
|
Test method for ignitability of foamed plastic - Welding spark method
|
|
GB/T 40238-2021
|
Reaction to fire tests for building materials and products - General rules for selection of substrates, conditioning and mounting of specimen
|
|
GB/T 40248-2021
|
Fire safety management of assembly occupancies
|
|
GB/T 40484-2021
|
Fire safety management for urban rail transit
|
|
GB/T 41020-2021
|
Guidance on building fire risk assessment for property insurance
|
|
GB/T 31540.5-2019
|
Fire safety engineering guide -- Part 5: Movement of fire effluents
|
|
GB/T 38301-2019
|
Determination of Limiting Oxygen Concentration (LOC) of Flammable Gases and Vapors
|
|
GB/T 38309-2019
|
Toxicity testing of fire effluents - Guidance for analysis of gases and vapours in fire effluents using FTIR gas analysis
|
|
GB/T 31593.1-2015
|
Fire safety engineering -- Part 1: Assessment, verification and validation of calculation methods
|
|
GB/T 31593.2-2015
|
Fire safety engineering -- Part 2: Data and information needed for FSE
|
|
GB/T 31593.3-2015
|
Fire safety engineering -- Part 3: Guidance on fire risk assessment
|
|
GB/T 31593.4-2015
|
Fire safety engineering -- Part 4: Selection of design fire scenarios and design fires
|
|
GB/T 31593.5-2015
|
Fire safety engineering -- Part 5: Requirements governing algebraic equations for fire plumes
|
|
GB/T 31593.6-2015
|
Fire safety engineering -- Part 6: Requirements governing algebraic equations for smoke layers
|
|
GB/T 31593.7-2015
|
Fire safety engineering -- Part 7: Requirements governing algebraic equations for ceiling jet flows
|
|
GB/T 31593.8-2015
|
Fire safety engineering -- Part 8: Requirements governing algebraic equations for vent flow
|
|
GB/T 31593.9-2015
|
Fire safety engineering -- Part 9: Guidance on evaluation of behaviour and movement of people
|
|
GB/T 5907.2-2015
|
Fire protection vocabulary -- Part 2: Fire prevention
|
|
GB/T 5907.3-2015
|
Fire protection vocabulary -- Part 3: Firefighting and rescue
|
|
GB/T 5907.4-2015
|
Fire protection vocabulary -- Part 4: Fire investigation
|
|
GB/T 5907.5-2015
|
Fire protection vocabulary -- Part 5: Fire products
|