|
Std ID |
Description (Standard Title) |
|
GB/T 15706-2012
|
Safety of machinery -- General principles for design -- Risk assessment and risk reduction
|
|
GB/T 17889.1-2012
|
Ladders -- Part 1: Terms, types, functional sizes
|
|
GB/T 17889.2-2012
|
Ladders -- Part 2: Requirements, test, marking
|
|
GB/T 17889.3-2012
|
Ladders -- Part 3: User instructions
|
|
GB/T 17889.4-2012
|
Ladders -- Part 4: Single or multiple hinge-joint ladders
|
|
GB/T 19876-2012
|
Safety of machinery -- Positioning of safeguards with respect to the approach speeds of parts of the human body
|
|
GB/T 25749.5-2012
|
Safety of machinery -- Evaluation of the emission of airborne hazardous substances -- Part 5: Test bench method for the measurement of the separation efficiency by mass of air cleaning systems with un-ducted outlet
|
|
GB/T 25749.6-2012
|
Safety of machinery -- Evaluation of the emission of airborne hazardous substances -- Part 6: Test bench method for the measurement of the separation efficiency by mass of air cleaning systems with ducted outlet
|
|
GB/T 25749.7-2012
|
Safety of machinery -- Evaluation of the emission of airborne hazardous substances -- Part 7: Test bench method for the measurement of the pollutant concentration parameter
|
|
GB/T 25749.8-2012
|
Safety of machinery -- Evaluation of the emission of airborne hazardous substances -- Part 8: Room method for the measurement of the pollutant concentration parameter
|
|
GB/T 25749.9-2012
|
Safety of machinery -- Evaluation of the emission of airborne-hazardous substances -- Part 9: Decontamination index
|
|
GB/T 28554-2012
|
Electrical equipment of industrial machines -- Electromagnetic compatibility for the construction machinery with internal electrical power supply
|
|
GB/T 28780-2012
|
Safety of machinery -- Integral lighting of machines
|
|
GB/T 18831-2010
|
Safety of machinery -- Interlocking devices associated with guards -- Principles for design and se-lection
|
|
GB/T 25749.1-2010
|
Safety of machinery -- Evaluation of the emission of airborne hazardous substances -- Part 1: Selection of test methods
|
|
GB/T 25749.2-2010
|
Safety of machinery -- Evaluation of the emission of airborne hazardous substances -- Part 2: Tracer gas method for the measurement of the emission rate of a given pollutant
|
|
GB/T 25749.3-2010
|
Safety of machinery -- Evaluation of the emission of airborne hazardous substances -- Part 3: Test bench method for the measurement of the emission rate of a given pollutant
|
|
GB/T 25749.4-2010
|
Safety of machinery -- Evaluation of the emission of airborne hazardous substances -- Part 4: Tracer method for the measurement of the capture efficiency of an exhaust system
|
|
GB/T 26118.1-2010
|
Safety of machinery -- Assessment and reduction of risks arising from radiation emitted by machinery -- Part 1: General principles
|
|
GB/T 26118.2-2010
|
Safety of machinery -- Assessment and reduction of risks arising from radiation emitted by machinery -- Part 2: Radiation emission measurement procedure
|
|
GB/T 26118.3-2010
|
Safety of machinery -- Assessment and reduction of risks arising from radiation emitted by machinery -- Part 3: Reduction of radiation by attenuation or screening
|
|
GB/T 24111-2009
|
Electrical equipment of industrial machines -- Electrical fast transient/burst immunity test specifications
|
|
GB/T 24112-2009
|
Electrical equipment of industrial machines -- Electrostatic discharge immunity test specifications
|
|
GB/T 16755-2008
|
Safety of machinery -- Rules for drafting and presentation of safety standards
|
|
GB/T 16855.1-2008
|
Safety of machinery -- Safety-related parts of control systems -- Part 1: General principles for design
|
|
GB/T 16856.1-2008
|
Safety of machinery -- Risk assessment -- Part 1: Principles
|
|
GB/T 16856.2-2008
|
Safety of machinery -- Risk assessment -- Part 2: Practical guidance and examples of methods
|
|
GB/T 17454.1-2008
|
Safety of machinery -- Pressure-sensitive protective devices -- Part 1: General principles for design and testing of pressure-sensitive floors
|
|
GB/T 17454.2-2008
|
Safety of machinery -- Pressure-sensitive protective devices -- Part 2: General principles for design and testing of pressure-sensitive edges and pressure-sensitive bars
|
|
GB/T 17454.3-2008
|
Safety of machinery -- Pressure-sensitive protective devices -- Part 3: General principles for design and testing of pressure-sensitive bumpers, plates, wires and similar devices
|
|
GB/T 22663-2008
|
Electrical equipment of industrial machines -- Electromagnetic compatibility -- Immunity requirements for machine tools
|
|
GB/T 22840-2008
|
Electrical equipment of industrial machines -- Test specifications for surge immunity
|
|
GB/T 22841-2008
|
Electrical equipment of industrial machines -- Test specifications for voltage dips, short interruptions immunity
|
|
GB/T 15706.1-2007
|
Safety of machinery -- Basic concepts, general principles for design -- Part 1: Basic terminology, methodology
|
|
GB/T 15706.2-2007
|
Safety of machinery -- Basic concepts, general principles for design -- Part 2: Technical principles
|
|
GB/T 16855.2-2007
|
Safety of machinery -- Safety-related parts of control systems -- Part 2: Validation
|
|
GB/T 20850-2007
|
Safety of machinery -- Guidelines for the understanding and use of safety of machinery standards
|
|
GB/T 21067-2007
|
Electrical equipment of industrial machines -- Electromagnetic compatibility -- General immunity requirements
|
|
GB/T 16855.100-2005
|
Safety for machinery -- Safety-related parts of control systems -- Part 100: Guidelines for the use and application of GB/T 16855.1
|
|
GB/T 16855.1-2005
|
Safety of machinery -- Safety-related parts of control systems -- Part 1: General principles for design
|
|
GB/T 19670-2005
|
Safety of machinery -- Prevention of unexpected start-up
|
|
GB/T 19671-2005
|
Safety of machinery -- Two-hand control devices -- Functional aspects and design principles
|
|
GB/T 19876-2005
|
Safety of machinery with human body parts near the speed positioning of protective equipment
|
|
GB/T 19436.1-2004
|
The mechanical electrical safety electro-sensitive protective equipment -- Part 1: General requirements and tests
|
|
GB/T 19436.2-2004
|
Mechanical electrical safety electro-sensitive protective devices -- Part 2: Particular requirements for equipment using active optoelectronic protective devices (AOPDs)
|
|
GB/T 18717.1-2002
|
Ergonomic design for the safety of machinery -- Part 1: Principles for determining the dimensions required for openings for whole-body access into machinery
|
|
GB/T 18717.2-2002
|
Ergonomic design for the safety of machinery -- Part 2: Principles for determining the dimensions required for openings for access of parts of the body into machinery
|
|
GB/T 18717.3-2002
|
Ergonomic design for the safety of machinery -- Part 3: Anthropometric data
|
|
GB/T 18831-2002
|
Safety of machinery -- Interlocking devices associated with guards -- Principles for design and selection
|
|
GB/T 18569.1-2001
|
Safety of machinery -- Reduction of risks to health from hazardous substances emitted by machinery -- Part 1: Principles and specifications for machinery manufacturers
|
|
GB/T 18569.2-2001
|
Safety of machinery -- Reduction of risks to health from hazardous substances emitted by machinery -- Part 2: Methodology leading to verification procedures
|
|
GB/T 18153-2000
|
Safety of machinery. Temperatures of touchable surfaces. Ergonomics data to establish temperature limit values for hot surfaces
|
|
GB/T 17889.1-1999
|
Ladders-- Part 1: terms, types, functional sizes
|
|
GB/T 17889.2-1999
|
Ladders--Part 2: requirements, testing, marking
|
|
GB/T 17454.1-1998
|
Safety of machinery--Pressure sensitive protective device-- Part 1: General principles for the design and testing of pressure sensing mats and pressure sensing floors
|
|
GB/T 16755-1997
|
Safety of machinery--Rules for the drafting and presentation of safety standards
|
|
GB/T 16855.1-1997
|
Safety of machinery--Safety related parts of control systems--Part 1: General principles for design
|
|
GB/T 16856-1997
|
Safety of machinery--Principles for risk assessment
|
|
GB/T 16454.4-1996
|
End mills with brazed helical hardmetai tips--Part 4: Technical specifications
|
|
GB/T 15706.1-1995
|
Safety machinery--Basic, concept, general principles for design--Part 1: Basic terminology, methodology
|
|
GB/T 15706.2-1995
|
Safety of machinery--Basic concept, general principles for design. Part 2: Technical principles and specifications
|
|
GB/T 6719-1986
|
Classification and specification for bag filters
|
|
GB/T 13126-2009
|
General specification for damp heat protective packaging of mechanical and electrical products
|
|
GB/T 13125-1991
|
General rule for damp heat protective packaging methods of machinery products
|
|
GB/T 13126-1991
|
General specification for damp heat protective packaging of machinery products
|
|
GB/T 15049.11-1997
|
CAD standard parts file--Specification of geometry and parameters--Rolling bearings
|
|
GB/T 15049.4-1996
|
CAD standard parts file--Specification of geometry and parameters--Pins
|
|
GB/T 15049.5-1996
|
CAD standard parts file--Specification of geometry and parameters--Nuts
|
|
GB/T 15049.7-1996
|
CAD standard parts file--Specification of geometry and parameters--Screws
|
|
GB/T 15049.8-1996
|
CAD standard parts file--Specification of geometry and parameters--Rings
|
|
GB/T 15049.9-1996
|
CAD standard parts file--Specification of geometry and parameters--Washers
|
|
GB/T 15049.3-1996
|
CAD standard parts file--Specification of geometry and parameters--Revets
|
|
GB/T 8129-1997
|
Industrial automation systems-Numerical control of machines-Vocabulary
|
|
GB/T 45220-2025
|
Multi-entity profile system for mass customization - Reference architecture
|
|
GB/T 45226-2025
|
Product lifecycle data model based on BOM
|
|
GB/T 45349-2025
|
Reference architecture of network collaborative manufacturing service platform supporting mass customization
|
|
GB/T 45387-2025
|
Management-control integration reference model of discrete intelligent factories
|
|
GB/T 45390-2025
|
Communication interface requirements for power lithium battery production equipment
|
|
GB/T 22454-2025
|
Enterprise modelling and architecture - Constructs for enterprise modelling
|
|
GB/T 45575-2025
|
Technical requirements of automatic inspection system for surface defect of industrial product
|
|
GB/T 45751-2025
|
Additive manufacturing - Process classification and coding
|
|
GB/T 43843-2024
|
Data service requirements of network collaborative manufacturing platform
|
|
GB/T 43851-2024
|
General requirements for interconnection of manufacturing logistics system
|
|
GB/T 43960-2024
|
Open application program interface requirements for cloud manufacturing service platform
|
|
GB/T 43961-2024
|
General integration requirements of technologies and applications for diagnostics and maintenance in manufacturing systems
|
|
GB/T 44063-2024
|
Automation systems and integration - Integration model of discrete manufacturing enterprise data space
|
|
GB/T 44312-2024
|
Inspection robot centralized monitoring system technical requirements
|
|
GB/T 44909-2024
|
Additive manufacturing - Technical requirements for product data protection of cloud service platform
|
|
GB/T 45024-2024
|
valuation requirements of cloud manufacturing service
|
|
GB/T 42619-2023
|
Additive manufacturing - Specification for process parameter database construction
|
|
GB/T 43148-2023
|
Additive manufacturing - Requirements for lightweight structure design
|
|
GB/T 43209-2023
|
Automation systems and integration - Virtual reconstruction technical requirements for smart production lines
|
|
GB/T 22270.5-2023
|
Industrial automation systems and integration - Service interface for testing applications - Part 5: Application program service interface
|
|
GB/T 40283.4-2023
|
Automation systems and integration - Interoperability of capability units for manufacturing application solutions - Part 4: Capability unit assessment for the manufacturing application requirements
|
|
GB/T 43335-2023
|
Automation systems and integration - Reference architecture for technology resources sharing service system
|
|
GB/T 43481-2023
|
Additive manufacturing - Requirements for data quality of three-dimensional process model
|
|
GB/T 20720.3-2022
|
Enterprise-control system integration - Part 3: Activity models of manufacturing operations management
|
|
GB/T 38002.2-2022
|
Automation system and integration - Serial real time communication system for manufacturing integration - Part 2: Input and output device profile
|
|
GB/T 41262-2022
|
Technical requirements for cyber-physical fusion anomaly detection specification of industrial control system
|
|
GB/T 41263-2022
|
Industrial control system dynamic reconfiguration active defense technical architecture specification
|