|
US$544.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 40283.4-2023: Automation systems and integration - Interoperability of capability units for manufacturing application solutions - Part 4: Capability unit assessment for the manufacturing application requirements
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 40283.4-2023 | English | 544 |
Add to Cart
|
5 days [Need to translate]
|
Automation systems and integration - Interoperability of capability units for manufacturing application solutions - Part 4: Capability unit assessment for the manufacturing application requirements
| Valid |
GB/T 40283.4-2023
|
PDF similar to GB/T 40283.4-2023
Basic data | Standard ID | GB/T 40283.4-2023 (GB/T40283.4-2023) | | Description (Translated English) | Automation systems and integration - Interoperability of capability units for manufacturing application solutions - Part 4: Capability unit assessment for the manufacturing application requirements | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J07 | | Classification of International Standard | 25.040.01 | | Word Count Estimation | 30,330 | | Date of Issue | 2023-11-27 | | Date of Implementation | 2024-06-01 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 40283.4-2023: Automation systems and integration - Interoperability of capability units for manufacturing application solutions - Part 4: Capability unit assessment for the manufacturing application requirements
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
CCSJ07
National Standards of People's Republic of China
Automation systems and integration
Unit of competency interoperability for manufacturing application solutions
Part 4: Assessment of units of competency for manufacturing application requirements
(ISO 16300-4:2019,IDT)
Published on 2023-11-27
2024-06-01 Implementation
State Administration for Market Regulation
Released by the National Standardization Administration Committee
Table of contents
PrefaceⅠ
Introduction II
1 Scope 1
2 Normative references 1
3 Terms and Definitions 2
4 Overview of unit of competency assessment 3
4:1 Brief description of software unit directory 3
4:2 Overall process of competency unit assessment 4
5 Software unit directory retrieval process 6
6 Functional Assessment Process 8
7 Interface Evaluation Process 9
8 Assessment Reporting Process11
Appendix A (Informative) Competency Template Example 15
Appendix B (Informative) Example 23 of Specific Specifications on Required Competencies
Appendix C (Informative) Evaluation Report Example 25
Reference 26
Foreword
This document complies with the provisions of GB/T 1:1-2020 "Standardization Work Guidelines Part 1: Structure and Drafting Rules of Standardization Documents"
Drafting:
This document is Part 4 of GB/T 40283 "Interoperability Units of Automation Systems and Integrated Manufacturing Application Solutions":
GB/T 40283 has released the following parts:
---Part 3: Verification and confirmation of interoperability of capability units;
---Part 4: Assessment of units of competency for manufacturing application requirements:
This document is equivalent to ISO 16300-4:2019 "Interoperability Units of Automation Systems and Integrated Manufacturing Application Solutions"
Part 4: Assessment of units of competency for manufacturing application requirements:
Please note that some content in this document may be subject to patents: The publisher of this document assumes no responsibility for identifying patents:
This document is proposed by China Machinery Industry Federation:
This document is under the jurisdiction of the National Automation System and Integration Standardization Technical Committee (SAC/TC159):
This document was drafted by: Beijing Institute of Machinery Industry Automation Co:, Ltd:, Beijing Institute of Technology, Guangdong Hengyineng Technology Co:, Ltd:
Company, Tsinghua University, Guangdong Hanqiu Intelligent Equipment Co:, Ltd:, Zhejiang University, Shenzhen Guangshengde Technology Development Co:, Ltd:, Tongji University
Science, Jiangsu Meike Solar Technology Co:, Ltd:, Tianjin University, Baotou Meike Silicon Energy Co:, Ltd:, Chongqing University, Linyi Lingong Intelligence
Information Technology Co:, Ltd:, Guangzhou Jiafan Computer Co:, Ltd:, Wuxi Zhouxiang Complete Welding Equipment Co:, Ltd:, Capita Technology Changsha Co:, Ltd:
Co:, Ltd:, Suzhou Langdian Robot Co:, Ltd:, Xiamen Aerospace Sirte Robot System Co:, Ltd:, Shenzhen Chengyi Intelligent Equipment Group
Co:, Ltd:, Bondi Intelligent Technology (Shanghai) Co:, Ltd:, Shenzhen Ruibao Zhilian Information Co:, Ltd:, Lizhili Machinery (Guangzhou) Co:, Ltd:
Co:, Ltd:, Shenzhen Jiutian Zhongchuang Automation Equipment Co:, Ltd:, Shenzhen Haimingde Technology Co:, Ltd:, Shenzhen Huiyi Technology Co:, Ltd:,
Guangdong Keserv Intelligent Technology Co:, Ltd:, Xiangyang Meilixin Technology Co:, Ltd:, Runtai Rescue Equipment Technology Hebei Co:, Ltd:, Dongguan City
Dingli Automation Technology Co:, Ltd:, Changzhou Mingsai Robot Technology Co:, Ltd:, Hefei Harbin Longyan Intelligent Equipment Co:, Ltd:, Hangzhou
Huile Intelligent Technology Co:, Ltd:, Shenzhen Dezhixin Automation Equipment Co:, Ltd:, Dongying Herui Petroleum Technology Co:, Ltd:, An
De Laser Intelligent Equipment (Guangdong) Co:, Ltd:, Changsha Jingyou New Material Technology Co:, Ltd:, Guangdong Tianciwan Laboratory Equipment Manufacturing Co:, Ltd:
Division, Photon (Shenzhen) Precision Technology Co:, Ltd:, Hunan Kaishi Times Technology Co:, Ltd:
The main drafters of this document: Nie Zilin, Yin Zuozhong, Su Hongye, Huang Shuangxi, Chen Bin, Chai Senchun, Sun Jiexiang, Wang Haidan, Liu Xianhui, Wang Lei,
Li Xiaobin, Chai Runqi, Hu Wen, Wang Shoumo, Jiang Jiang, Yang Xiantao, Shan Yicheng, Chen Jianping, Li Zhangjian, Wen Degang, Guo Dong, Yu Junsheng, Xu Dan, Mo Tong,
Chen Qizhi, Zhou Yong, Wang Kai, Li Wei, Zhang Tianwei, Qin Xiugong, Wang Xianfeng, Liu Yongping, Zhao Yixun, Chen Guo, Zhou Guoping, Jiang Zuyuan, Yi Zhengyu, Chen Biaofa,
Liang Chaojian, Qiao Anying, Huang Pianchan, Li Changfeng, Li Xinli, Yi Chunhong, Liu Zhengwen, Wan Jinmei, Huang Jianming, Yi Wei, Wu Xuemian, Yao Wenzheng, Zhang Kai:
Introduction
GB/T 40283 addresses the needs of manufacturing software users and suppliers for software interoperability in the field of industrial automation:
User interoperability requirements include:
---Integrate automation application systems through the ability to combine a set of software components provided by various sources;
---Integrate the capabilities of software units from one resource system platform to another;
---Verify and confirm the ability of the software unit to meet the requirements of the automation application system:
Supplier requirements include:
---Represents the set of capabilities provided by the software components used in the software unit;
---Verify whether the software component capabilities are part of the required software unit capabilities;
---Catalog software units based on their interoperability in automation application systems to support broad distribution:
GB/T 40283 also involves software interoperability services, including:
--- Access descriptions of software capabilities to enable interoperability assessment;
---It is best to use a search engine to automatically search and locate candidate software units and components;
---Represents dependencies between software components of an automation application running on a specific system platform:
First, software capabilities are defined as standards with a set of capabilities and services that are used to evaluate the performance of capability providers: and then express it
and are expressed as facts about software, capabilities, and capabilities: ISO 16100 (all parts) deals with interoperability capability building for manufacturing software
The specification aims to provide a standardized method to describe the capabilities of manufacturing software based on the Manufacturing Software Unit (MSU) capability specification: exist
In ISO 16100, software components are included in the MSU: ISO 16100 also provides a way to incorporate MSU capabilities as information through capability specifications:
way of exchange: Software capability building planning is the basis for providing the above software interoperability services: ISO 16100 is used as the basis for GB/T 40283
Base:
To establish GB/T 40283, many steps need to be performed: Initial steps show which interops are enabled using software capability specifications
Sexual services: Subsequent steps develop specific methods and mechanisms for providing these interoperability services: The output results of GB/T 40283 are planned to be divided into four
composed of parts:
---Part 1: Application requirements capability unit interoperability criteria: The purpose is to describe automation in terms of capabilities provided by a set of MSUs
solution:
---Part 2: Capability templates and software unit classification: The purpose is to describe the capabilities of a software unit of an automation solution that
Capability requirements that can be mapped to target manufacturing applications:
---Part 3: Verification and validation of competency unit interoperability: The purpose is to use a verification and validation framework to interoperate with the
Describe the steps for using and implementing operational criteria:
---Part 4: Assessment of units of competency for manufacturing application requirements: The purpose is to indicate that candidates in the software unit catalog have manufacturing applications
The degree of correspondence with needs:
Automation systems and integration
Unit of competency interoperability for manufacturing application solutions
Part 4: Assessment of units of competency for manufacturing application requirements
1 Scope
This document specifies a search method for obtaining candidate capability units that meet the requirements of manufacturing applications from the software unit catalog:
2 Normative reference documents
The contents of the following documents constitute essential provisions of this document through normative references in the text: Among them, the dated quotations
For undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to
this document:
ISO 16100-1 Capability-building regulations for interoperability of industrial automation systems and integrated manufacturing software Part 1: Framework (Industrial
Framework)
Note: GB/T 19902:1-2005 Regulations on Capability Building for Interoperability of Industrial Automation Systems and Integrated Manufacturing Software Part 1: Framework (ISO 16100-1:
2002)
ISO 16100-3 Interoperability Capability Establishment of Industrial Automation Systems and Integrated Manufacturing Software Part 3: Interface Services, Protocols
Note: GB/T 19902:3-2006 Industrial automation system and integrated manufacturing software interoperability capability building regulations Part 3: Interface services, protocols and capabilities
Force template (ISO 16100-3:2005, IDT)
ISO 16100-5 Capability building regulations for interoperability of industrial automation systems and integrated manufacturing software Part 5: Based on multi-capability classification
Note: GB/T 19902:5-2011 Industrial automation system and integrated manufacturing software interoperability capability construction regulations Part 5: Based on multi-capability class structure
Methodology for specific regulation matching (ISO 16100-5:2009, IDT)
ISO 16100-6 Capability building regulations for interoperability of industrial automation systems and integrated manufacturing software Part 6: Based on multi-capability classification
Note: GB/T 19902:6-2012 Industrial automation system and integrated manufacturing software interoperability capability construction regulations Part 6: Based on multi-capability class structure
Interface services and protocols for specialized matching (ISO 16100-6:2011, IDT)
ISO 16300-1 Interoperability units of automation systems and integrated manufacturing application solutions Part 1: Application requirement capabilities
requirements)
ISO 16300-2 Competency unit interoperability between automation systems and integrated manufacturing application solutions Part 2: Competency templates and
|