HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (18 Oct 2025)

GB/T 16755-2015 English PDF

US$489.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 16755-2015: Safety of machinery -- Rules for drafting and presentation of safety standards
Status: Valid

GB/T 16755: Evolution and historical versions

Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 16755-2015English489 Add to Cart 4 days [Need to translate] Safety of machinery -- Rules for drafting and presentation of safety standards Valid GB/T 16755-2015
GB/T 16755-2008English799 Add to Cart 5 days [Need to translate] Safety of machinery -- Rules for drafting and presentation of safety standards Obsolete GB/T 16755-2008
GB/T 16755-1997English599 Add to Cart 4 days [Need to translate] Safety of machinery--Rules for the drafting and presentation of safety standards Obsolete GB/T 16755-1997

PDF similar to GB/T 16755-2015


Standard similar to GB/T 16755-2015

GB/T 16754   GB/T 16855.1   GB/T 16855.2   GB/T 20850   

Basic data

Standard ID GB/T 16755-2015 (GB/T16755-2015)
Description (Translated English) Safety of machinery -- Rules for drafting and presentation of safety standards
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard J09
Classification of International Standard 13.110
Word Count Estimation 23,223
Date of Issue 2015-12-10
Date of Implementation 2016-07-01
Older Standard (superseded by this standard) GB/T 16755-2008
Quoted Standard GB/T 1.1; GB/T 15706-2012; GB/T 30174-2013
Adopted Standard ISO Guide 78-2012, MOD
Regulation (derived from) National Standard Announcement 2015 No.38
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary This standard specifies the drafting and presentation rules of mechanical safety standards, the main purpose is to make the various standards to achieve coherence and quality standards. This standard also specifies the requirements for selection criteria for new work items, as well as the requirements for rapid and efficient procedures for revising the machinery safety standards. Due to the special requirements of the machinery safety standard, the requirements specified in this standard are necessary supplementary to GB/T 1.1. This standard is mainly used for the drafting of Class C standards. This standard also applies to the drafting of the C standard. However, the expected changes in the format of such standards will hinder the application of this standard. When the requirements of this standard apply only to Class B standards, this standard gives a description.

GB/T 16755-2015: Safety of machinery -- Rules for drafting and presentation of safety standards

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Safety of machinery - Rules for drafting and presentation of safety standards ICS 13.110 J09 National Standards of People's Republic of China Replacing GB/T 16755-2008 Safety of machinery safety standards drafting and presentation rules (ISO GUIDE78.2012, MOD) Issued on. 2015-12-10 2016-07-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Table of Contents

Introduction Ⅲ Introduction Ⅳ 1 Scope 1 2 Normative references 1 3 Terms and definitions 4 General 3 4.1 All safety standards 3 4.2 Class B standard 3 4.3 C Class 3 standard 4.4 Class B requirements 4 4.5 C class standard 4 Differences 5 standard principles before drafting and drafting process to be considered 5 5.1 General 5 5.2 determine the need to develop and/or revised standards 5 5.3 determine the scope of 5 5.4 hazard identification, hazard or danger status event 5 6 5.5 risk estimation and evaluation of the danger arising 5.6 determine the risk decreases the target 6 5.7 identify ways of eliminating the risk of safety requirements and/or limit risk and/or risk mitigation measures 6 5.8 Safety requirements and/or measures to reduce the risk of compliance verification 6 6 safety standard format 7 6.1 General 7 6.2 "Preface" 7 6.3 "Introduction" 7 6.4 "scope" 8 6.5 "Normative references" 8 6.6 "Terms and Definitions [symbols and abbreviations]" 9 6.7 "Safety requirements and/or risk mitigation measures." 9 6.8 "Safety requirements and/or measures to reduce the verification risk" 10 6.9 "usage information" 10 6.10 Appendix 11 Appendix A (normative) Class B available without a standard procedure followed 12 Appendix B (Informative Appendix) C class standard format 13 References 16

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard replaces GB/T 16755-2008 "Safety of machinery safety standards drafting and presentation rules." And GB/T 16755- Compared to 2008, in addition to editorial changes, the major technical changes are as follows. --- Text, the term "risk mitigation measures" instead of the term "protection measures"; --- Delete the contents of the 2008 version of the list of major risk 6.7; --- Determine the need for an increase in the revision of the standard list of questions in a question [see 5.2d)]; --- Modify the contents of the Class B and Class C standards described in the introduction (see 63, 2008. Version 6.3.); --- Increasing the range described for NA machinery or mechanical parts (642, 2008 Edition 6.4.2.); --- Modified C class standard format described range (see Appendix B, 2008 edition Appendix B); --- Increase in C class standard format Appendix D (see Appendix B, 2008 edition Appendix B). This standard uses redrafted law modified version of ISO Guide 78.2012 "Safety of machinery safety standards drafting and presentation rules." This standard and ISO Guide 78.2012 compared to major technological changes are as follows. --- The ISO Guide 78.2012 provision to ISO /IEC Guide specific provisions of Part 2 replace references GB/T 1.1 in Claim; --- Normative references added GB/T 30174-2013 Safety of machinery - Terminology; --- Deleted 4.1,5.2b) and 6.5 on regional standardization related content. Please note that some of the content of this document may involve patents. Release mechanism of the present document does not assume responsibility for the identification of these patents. This standard by the national security machinery Standardization Technical Committee (SAC/TC208) and focal points. This standard was drafted. Rugao packaging Food Machinery Co., Jinling Institute of Technology, the National Machine Products Quality Supervision and Inspection Center, Nanjing Forestry University, the Institute of Electrical and Mechanical Instrument Engineering, Mechanical Science Research Institute, Guangxi Liugong Machinery Co., Ltd., Omron Automation (China) Ltd., Pilz Automation Trading (Shanghai) Co., Ltd. The main drafters of this standard. Shizhuan Ming, Yang Zhong, ranking Ronghua, Liu Zhiyong, Zhao Qin Zhi, Li Qin, ROCKETS, Ning Yan, Li Liyan, Zhang Tianqiang, Luo Guang, Cheng Hongbing, Mao Yu Lin, Yu Chen can, Lin JR, Huang Jiong, Zhang Xin, Ma Liqiang, Li Yang, now, Bao Chen Jun, Zhao Chunhui, Li Jing, Wang Jingyi, Zhao Mao Cheng, Wu Jian, Curie Kai, Zhang Xiaofei, Fu Hui Qing, Jiang Tao. This standard replaces the standards previously issued as follows. --- GB/T 16755-1997, GB/T 16755-2008.

Introduction

Safety is an important part of the machinery of production safety, Standardization Technical Committee related to China has developed a series of mechanical safety The relevant standards. Therefore, there is need for preparation, drafting and presentation rules such safety standards as GB/T 1.1 in the general principles And requirements for the supplement. The rules specified in this standard within the machinery intended for the field of security standards and the drafting of Class B Class C standard (see 3.2 and 3.3 for definition) standard Associate Technical Committee to use. And references used in this standard principles and concepts GB/T 15706 in established, and taking into account possible GB/T 20000.4 of the principles and concepts. Safety of machinery safety standards drafting and presentation rules

1 Scope

This standard specifies the mechanical safety standards drafting and presentation of the rules, the main purpose is to make all kinds of standards developed to achieve coherent and Quality standards. This standard also provides for a new work item selection criteria requirements, as well as fast and efficient machinery safety standards revision procedures. Due to the special requirements of machinery safety standards, given the requirements of this standard is a necessary complement to the GB/T 1.1 in. This standard is mainly used for Class C standard drafting. This standard also applies to Class B standard drafting, however, such standards in the pre-format Changes will hinder the scope of this standard. When the requirements of this standard apply only to Class B standards, this standard gives instructions.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 1.1 Standardization Guide Part 1. The structure and preparation of standard (GB/T 1.1-2009, ISO /IEC Directives, Part 2.2004, NEQ) GB/T 15706-2012 Safety of machinery - General principles for design risk assessment and risk decreases (ISO 12100.2010, IDT) GB/T 30174-2013 Safety of machinery - Terminology

3 Terms and Definitions

GB/T 1.1 and GB/T 30174 and defined by the following terms and definitions apply to this document. For ease of use, the following duplicate columns Out of the GB/T 30174 in some terms and definitions. 3.1 Class A standard type-Astandard Basic safety standards The basic concept can be applied to all mechanical safety, design principles and general characteristics of the standard. [GB/T 30174-2013, the definition 2.49] 3.2 Class B standard type-Bstandard General safety standards A security feature mechanical energy in a wide range of applications or standard safety device for a class requirement. [GB/T 30174-2013, the definition 2.50] 3.2.1 B1 class standard type-B1standard To provide for specific security features (such as safety distances, surface temperature, noise) standards. [GB/T 30174-2013, the definition 2.50.1] 3.2.2 B2 class standard type-B2standard The required standard safety devices (such as hands controls, interlocking devices, pressure sensitive protective devices, protective devices).

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 16755-2015_English be delivered?

Answer: Upon your order, we will start to translate GB/T 16755-2015_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 16755-2015_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 16755-2015_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 16755-2015?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 16755-2015 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.