|
Std ID |
Description (Standard Title) |
Detail |
|
GB/T 2930.6-2017
|
Rules of seed testing for forage, turfgrass and other herbaceous plant -- Seed health testing
|
GB/T 2930.6-2017
|
|
GB/T 2930.7-2017
|
Rules of seed testing for forage, turfgrass and other herbaceous plant -- Species and variety testing
|
GB/T 2930.7-2017
|
|
GB/T 2930.8-2017
|
Rules of seed testing for forage, turfgrass and other herbaceous plant -- Determination of moisture content
|
GB/T 2930.8-2017
|
|
GB/T 2930.9-2017
|
Rules of seed testing for forage, turfgrass and other herbaceous plant -- Weight determination
|
GB/T 2930.9-2017
|
|
GB/T 29618.62-2017
|
Field device tool (FDT) interface specification -- Part 62: Field device tool (FDT) style guide
|
GB/T 29618.62-2017
|
|
GB/T 29992-2017
|
Rubber sealing rings for pressure cooker
|
GB/T 29992-2017
|
|
GB/T 30104.103-2017
|
Digital addressable lighting interface -- Part 103: General requirements -- Control devices
|
GB/T 30104.103-2017
|
|
GB/T 30269.503-2017
|
Information technology -- Sensor networks -- Part 503: Identification: Identifier registration procedures for sensor node
|
GB/T 30269.503-2017
|
|
GB/T 30357.7-2017
|
Oolong tea -- Part 7: Foshou
|
GB/T 30357.7-2017
|
|
GB/T 3036-2017
|
Marine centric-pivoted butterfly valves
|
GB/T 3036-2017
|
|
GB/T 11213.6-1989
|
Sodium hydroxide for chemical fiber use--Determination of sulphate mass fraction--Turbidimetric method
|
GB/T 11213.6-1989
|
|
GB/T 30475.3-2017
|
Filters for compressed air -- Test methods -- Part 3: Particulates
|
GB/T 30475.3-2017
|
|
GB/T 30475.4-2017
|
Filters for compressed air -- Test methods -- Part 4: Water
|
GB/T 30475.4-2017
|
|
GB/T 30559.2-2017
|
Energy performance of lifts, escalators and moving walks -- Part 2: Energy calculation and classification for lifts (elevators)
|
GB/T 30559.2-2017
|
|
GB/T 30559.3-2017
|
Energy performance of lifts, escalators and moving walks -- Part 3: Energy calculation and classification of escalators and moving walks
|
GB/T 30559.3-2017
|
|
GB/T 307.1-2017
|
Rolling bearings -- Radial bearings -- Geometrical product specifications (GPS) and tolerance values
|
GB/T 307.1-2017
|
|
GB/T 307.4-2017
|
Rolling bearings -- Thrust bearings -- Geometrical product specifications (GPS) and tolerance values
|
GB/T 307.4-2017
|
|
GB/T 30843.3-2017
|
Variable-frequency drive above 1 kV and not exceeding 35 kV -- Part 3: Safety requirements
|
GB/T 30843.3-2017
|
|
GB/T 30850.4-2017
|
Standardized guidelines for e-government -- Part 4: Information sharing
|
GB/T 30850.4-2017
|
|
GB/T 311.3-2017
|
Insulation co-ordination -- Part 3: Procedures for high-voltage direct current (HVDC) converter stations
|
GB/T 311.3-2017
|
|
GB/T 32419.6-2017
|
Information technology -- Specification for SOA technical implementation -- Part 6: Identity management service
|
GB/T 32419.6-2017
|
|
GB/T 32910.1-2017
|
Data center -- Resource utilization -- Part 1: Terminology
|
GB/T 32910.1-2017
|
|
GB/T 33017.5-2017
|
Technical requirements of high efficiency air pollution control equipment for assessment -- Part 5: Air cleaners
|
GB/T 33017.5-2017
|
|
GB/T 33523.2-2017
|
Geometrical product specifications (GPS) -- Surface texture: Areal -- Part 2: Terms, definitions and surface texture parameters
|
GB/T 33523.2-2017
|
|
GB/T 33846.4-2017
|
Information technology -- SOA supportive functional units interoperability -- Part 4: Service orchestration
|
GB/T 33846.4-2017
|
|
GB/T 33941.3-2017
|
Earth-moving machinery -- Structure stress test method -- Part 3: Equipment and attachments of loaders, excavators and backhoe loaders
|
GB/T 33941.3-2017
|
|
GB/T 34048-2017
|
Ultraviolet radiometer
|
GB/T 34048-2017
|
|
GB/T 11213.7-1989
|
Sodium hydroxide for chemical fiber use--Determination of copper mass fraction--Spectrometric method
|
GB/T 11213.7-1989
|
|
GB/T 34272-2017
|
Safety requirements of small amusement device
|
GB/T 34272-2017
|
|
GB/T 34327-2017
|
Terminology for curtain wall
|
GB/T 34327-2017
|
|
GB/T 34329-2017
|
General requirements of fiber reinforced plastics pressure vessel
|
GB/T 34329-2017
|
|
GB/T 34354-2017
|
Full face tunnel boring machine -- Terms and commercial specification
|
GB/T 34354-2017
|
|
GB/T 34369-2017
|
General technical conditions for electrical control device of passenger ropeway
|
GB/T 34369-2017
|
|
GB/T 34370.2-2017
|
Nondestructive testing of amusement equipment -- Part 2: Visual examination
|
GB/T 34370.2-2017
|
|
GB/T 34370.4-2017
|
Nondestructive testing of amusement equipment -- Part 4: Penetrant testing
|
GB/T 34370.4-2017
|
|
GB/T 34370.5-2017
|
Nondestructive testing of amusement equipment -- Part 5: Ultrasonic testing
|
GB/T 34370.5-2017
|
|
GB/T 34377-2017
|
Technical code for application design, installation and acceptance of domestic solar water heating systems
|
GB/T 34377-2017
|
|
GB/T 34378-2017
|
Dynamic balance test method for motorcycle tyres
|
GB/T 34378-2017
|
|
GB/T 34381-2017
|
Evaluation method for reliability on CNC turret punch press
|
GB/T 34381-2017
|
|
GB/T 34385-2017
|
General technical specifications for cold roll forming machinery
|
GB/T 34385-2017
|
|
GB/T 34386-2017
|
Web-fed print quality inspection system
|
GB/T 34386-2017
|
|
GB/T 34391-2017
|
Reciprocating positive displacement pumps for petroleum, petrochemical and natural gas industries
|
GB/T 34391-2017
|
|
GB/T 34428.1-2017
|
Communication rules of the devices of surveillance and control system for expressway -- Part 1: Universal rules
|
GB/T 34428.1-2017
|
|
GB/T 34428.2-2017
|
Communication rules of the devices of surveillance and control system for expressway -- Part 2: Vehicle detector
|
GB/T 34428.2-2017
|
|
GB/T 34428.3-2017
|
Communication rules of the devices of surveillance and control system for expressway -- Part 3: LED changeable message sign
|
GB/T 34428.3-2017
|
|
GB/T 34428.5-2017
|
Communication rules of the devices of surveillance and control system for expressway -- Part 5: Tunnel environment detector
|
GB/T 34428.5-2017
|
|
GB/T 34472-2017
|
General technical requirements of stainless steel for building curtain wall
|
GB/T 34472-2017
|
|
GB/T 34474.1-2017
|
Determination of banded structure of steel -- Part 1: Micrographic method using standards diagrams
|
GB/T 34474.1-2017
|
|
GB/T 34477-2017
|
Metallic materials -- Sheet and strip -- Dent resistance test method
|
GB/T 34477-2017
|
|
GB/T 34480-2017
|
Aluminum alloys die forgings, hand forgings, and rolled ring forgings from spray-formed billet
|
GB/T 34480-2017
|
|
GB/T 34481-2017
|
Test method for measuring etch pit density (EPD) in low dislocation density monocrystalline germanium slices
|
GB/T 34481-2017
|
|
GB/T 34488-2017
|
Aluminium alloys extruded profiles for aluminium bridges
|
GB/T 34488-2017
|
|
GB/T 34491-2017
|
Coatings for sintered neodymium iron boron permanent magnets
|
GB/T 34491-2017
|
|
GB/T 34496-2017
|
Catalyst for heavy-duty gas engine vehicle exhaust purification
|
GB/T 34496-2017
|
|
GB/T 34506-2017
|
Aluminum alloys extruded profiles, bars, rods and tubes from spray-formed billet
|
GB/T 34506-2017
|
|
GB/T 34509.1-2017
|
In-orbit field radiometric calibration for optical remote sensor of land observation satellite -- Part 1: Visible-near infrared
|
GB/T 34509.1-2017
|
|
GB/T 34509.2-2017
|
In-orbit field radiometric calibration for optical remote sensor of land observation satellite -- Part 2: Thermal infrared
|
GB/T 34509.2-2017
|
|
GB/T 34511-2017
|
Relative motion analysis elements after LV/SC separation
|
GB/T 34511-2017
|
|
GB/T 34512-2017
|
Requirement for interface of manned spacecraft peripheral docking mechanism
|
GB/T 34512-2017
|
|
GB/T 34513-2017
|
Space debris mitigation requirements
|
GB/T 34513-2017
|
|
GB/T 34514-2017
|
Requirements of remote sensing data distribution and user service for land observation satellite
|
GB/T 34514-2017
|
|
GB/T 34515-2017
|
Thermal balance test method for spacecraft
|
GB/T 34515-2017
|
|
GB/T 34516-2017
|
Vibration test method for spacecraft
|
GB/T 34516-2017
|
|
GB/T 34517-2017
|
Evaluating method for spacecraft non-metal materials outgassing in vacuum
|
GB/T 34517-2017
|
|
GB/T 34518-2017
|
Requirements of data transmission and exchange interface for land observation satellite ground system
|
GB/T 34518-2017
|
|
GB/T 34519-2017
|
Specifications of amusement device kiddie rocking category
|
GB/T 34519-2017
|
|
GB/T 34520.1-2017
|
Test methods for continuous silicon carbide fiber -- Part 1: Size content of filament yarn
|
GB/T 34520.1-2017
|
|
GB/T 34520.2-2017
|
Test methods for continuous silicon carbide fiber -- Part 2: Diameter of single-filament fiber
|
GB/T 34520.2-2017
|
|
GB/T 34520.3-2017
|
Test methods for continuous silicon carbide fiber -- Part 3: Linear density and density
|
GB/T 34520.3-2017
|
|
GB/T 34520.4-2017
|
Test methods for continuous silicon carbide fiber -- Part 4: Tensile properties of filament yarn
|
GB/T 34520.4-2017
|
|
GB/T 34520.5-2017
|
Test methods for continuous silicon carbide fiber -- Part 5: Tensile properties of single-filament fiber
|
GB/T 34520.5-2017
|
|
GB/T 34520.6-2017
|
Test methods for continuous silicon carbide fiber -- Part 6: Resistivity
|
GB/T 34520.6-2017
|
|
GB/T 34520.7-2017
|
Test methods for continuous silicon carbide fiber -- Part 7: High temperature strength retention rate
|
GB/T 34520.7-2017
|
|
GB/T 34521-2017
|
Controller of small wind turbines
|
GB/T 34521-2017
|
|
GB/T 34522-2017
|
Thermal vacuum test method for spacecraft
|
GB/T 34522-2017
|
|
GB/T 34523-2017
|
Estimating methods for the mass of remaining propellant of spacecraft
|
GB/T 34523-2017
|
|
GB/T 34524-2017
|
Wind turbines -- Shaft
|
GB/T 34524-2017
|
|
GB/T 34526-2017
|
Rules for filling of gas mixture cylinder
|
GB/T 34526-2017
|
|
GB/T 34527-2017
|
Specification of gas cylinder valve for air rebreather
|
GB/T 34527-2017
|
|
GB/T 34531-2017
|
Periodic inspection and evaluation of liquefied dimethyl ether steel cylinders
|
GB/T 34531-2017
|
|
GB/T 34550.1-2017
|
Method for evaluation of cooling seawater treatment agents -- Part 1: Determination of corrosion inhibition performance
|
GB/T 34550.1-2017
|
|
GB/T 34553-2017
|
Test method of door-set opening performance in diagonal deformation under seismic aspects
|
GB/T 34553-2017
|
|
GB/T 34555-2017
|
Test method of air permeability, water tightness, wind load resistance performance for building skylight system
|
GB/T 34555-2017
|
|
GB/T 34558-2017
|
Terminology of metal matrix composites
|
GB/T 34558-2017
|
|
GB/T 34560.2-2017
|
Structural steels -- Part 2: Technical delivery conditions for structural steels for general purposes
|
GB/T 34560.2-2017
|
|
GB/T 34570.1-2017
|
Safety for rechargeable battery packs and chargers for electric tools -- Part 1: Safety for rechargeable battery packs
|
GB/T 34570.1-2017
|
|
GB/T 34578-2017
|
Technical requirements for operation, maintenance and test of instrumentation and actuating equipment in thermal power plant
|
GB/T 34578-2017
|
|
GB/T 34590.10-2017
|
Road vehicles -- Functional safety -- Part 10: Guideline
|
GB/T 34590.10-2017
|
|
GB/T 34590.5-2017
|
Road vehicles -- Functional safety -- Part 5: Product development at the hardware level
|
GB/T 34590.5-2017
|
|
GB/T 34597-2017
|
Passenger cars -- Stopping distance at straight-line braking with ABS -- Open loop test method
|
GB/T 34597-2017
|
|
GB/T 34606-2017
|
Evaluation method of overall energy-saving performance of building envelope
|
GB/T 34606-2017
|
|
GB/T 34607-2017
|
Performance assessment of the desulfurization equipment and dust collector for sintering flue gas from iron and steel industry
|
GB/T 34607-2017
|
|
GB/T 34618-2017
|
Temperature detection method for judging internal leakage faults of working valves in steam drainage steam
|
GB/T 34618-2017
|
|
GB/T 34625-2017
|
Metallic and other inorganic coatings -- Electrodeposited gold and gold alloy coatings for electrical, electronic and engineering purposes -- Specification and test methods
|
GB/T 34625-2017
|
|
GB/T 34626.1-2017
|
Metallic and other inorganic coatings -- Cleaning and preparation of metal surfaces -- Part 1: Ferrous metals and alloys
|
GB/T 34626.1-2017
|
|
GB/T 34628-2017
|
Non-destructive testing of welds -- General rules for metallic materials
|
GB/T 34628-2017
|
|
GB/T 34630.4-2017
|
Friction stir welding -- Aluminium and its alloys -- Part 4: Specification and qualification of welding procedures
|
GB/T 34630.4-2017
|
|
GB/T 34633.1-2017
|
Plain bearings -- Pedestal plain bearings -- Part 1: Pillow blocks
|
GB/T 34633.1-2017
|
|
GB/T 34633.2-2017
|
Plain bearings -- Pedestal plain bearings -- Part 2: Side flange bearings
|
GB/T 34633.2-2017
|
|
GB/T 34633.3-2017
|
Plain bearings -- Pedestal plain bearings -- Part 3: Centre flange bearings
|
GB/T 34633.3-2017
|