|
Std ID |
Description (Standard Title) |
Detail |
|
GB/T 1506-2016
|
Manganese ores -- Determination of manganese content -- Potentiometric method and ammonium iron (Ⅱ) sulphate titrimetric method
|
GB/T 1506-2016
|
|
GB/T 16935.3-2016
|
Insulation coordination for equipment within low-voltage systems -- Part 3: Use of coating, potting or moulding for protection against pollution
|
GB/T 16935.3-2016
|
|
GB/T 20564.9-2016
|
Continuously cold rolled high strength steel sheet and strip for automobile -- Part 9: Quenching and partitioning steel
|
GB/T 20564.9-2016
|
|
GB/T 21561.3-2016
|
Railway applications -- Rolling stock pantographs characteristics and tests -- Part 3: Interface between pantograph and rolling stock for mainline vehicles
|
GB/T 21561.3-2016
|
|
GB/T 22080-2016
|
Information technology -- Security techniques -- Information security management systems -- Requirements
|
GB/T 22080-2016
|
|
GB/T 22081-2016
|
Information technology -- Security techniques -- Code of practice for information security controls
|
GB/T 22081-2016
|
|
GB/T 25000.51-2016
|
Systems and software engineering -- Systems and software Quality Requirements and Evaluation (SQuaRE) -- Part 51: Requirements for quality of Ready to Use Software Product (RUSP) and instructions for testing
|
GB/T 25000.51-2016
|
|
GB/T 26949.20-2016
|
Industrial trucks -- Verification of stability -- Part 20: Additional stability test for trucks operating in the special condition of offset load, offset by utilization
|
GB/T 26949.20-2016
|
|
GB/T 30984.3-2016
|
Solar glass -- Part 3: Reflective glass mirror
|
GB/T 30984.3-2016
|
|
GB/T 32620.2-2016
|
Lead-acid batteries used for electric road vehicles -- Part 2: Kinds of products and specifications
|
GB/T 32620.2-2016
|
|
GB/T 32838-2016
|
Nondestructive testing method of laser shearography for vehicle tyre
|
GB/T 32838-2016
|
|
GB/T 33009.1-2016
|
Industrial automation and control system security -- Distributed control system (DCS) -- Part 1: Protection requirements
|
GB/T 33009.1-2016
|
|
GB/T 33009.2-2016
|
Industrial automation and control system security -- Distributed control system (DCS) -- Part 2: Management requirements
|
GB/T 33009.2-2016
|
|
GB/T 33009.4-2016
|
Industrial automation and control system security -- Distributed control system (DCS) -- Part 4: Risk and vulnerability detection requirements
|
GB/T 33009.4-2016
|
|
GB/T 33045-2016
|
Comb honey
|
GB/T 33045-2016
|
|
GB/T 33082-2016
|
Mechanical parking systems -- Safety requirements for the application and operation
|
GB/T 33082-2016
|
|
GB/T 33206-2016
|
Performance testing of automotive V-ribbed belts
|
GB/T 33206-2016
|
|
GB/T 33234-2016
|
Reflectance test method of reflective glass mirror for concentrated solar power system
|
GB/T 33234-2016
|
|
GB/T 33235-2016
|
Hail impact test method of reflective glass mirror for concentrated solar power
|
GB/T 33235-2016
|
|
GB/T 33320-2016
|
Adhesives in food packaging materials and containers
|
GB/T 33320-2016
|
|
GB/T 33324-2016
|
Determination of heavy metal content of latex products -- Inductively coupled plasma atomic emission spectrometry
|
GB/T 33324-2016
|
|
GB/T 33460-2016
|
Specifications for compiling dismantling manual of end-of-life vehicles
|
GB/T 33460-2016
|
|
GB/T 3620.1-2016
|
Designation and composition of titanium and titanium alloys
|
GB/T 3620.1-2016
|
|
GB/T 479-2016
|
Determination of plastometric indices of bituminous coal
|
GB/T 479-2016
|
|
GB/T 5153-2016
|
Designation and composition of wrought magnesium and magnesium alloys
|
GB/T 5153-2016
|
|
GB/T 12496.8-2015
|
Test methods of wooden activated carbon -- Determination of iodine number
|
GB/T 12496.8-2015
|
|
GB/T 17618-2015
|
Information technology equipment -- Immunity characteristics -- Limits and methods of measurement
|
GB/T 17618-2015
|
|
GB/T 1859.1-2015
|
Reciprocating internal combustion engines -- Measurement of sound power level using sound pressure -- Part 1: Engineering method
|
GB/T 1859.1-2015
|
|
GB/T 1859.2-2015
|
Reciprocating internal combustion engines -- Measurement of sound power level using sound pressure -- Part 2: Survey method
|
GB/T 1859.2-2015
|
|
GB/T 21562.2-2015
|
Railway applications -- Specification and demonstration of reliability, availability, maintainability and safety (RAMS) -- Part 2: Guide to the application for safety
|
GB/T 21562.2-2015
|
|
GB/T 21562.3-2015
|
Railway applications -- Specification and demonstration of reliability, availability, maintainability and safety (RAMS) -- Part 3: Guide to the application for rolling stock RAM
|
GB/T 21562.3-2015
|
|
GB/T 31886.1-2015
|
Test method about the influence of gaseous contaminants in reaction gas on the performance of proton exchange membrane fuel cells -- Part 1: Gaseous contaminants in air
|
GB/T 31886.1-2015
|
|
GB/T 31886.2-2015
|
Test method about the influence of gaseous contaminants in reaction gas on the performance of proton exchange membrane fuel cells -- Part 2: Gaseous contaminants in hydrogen
|
GB/T 31886.2-2015
|
|
GB/T 32117-2015
|
Cellulose diacetate flake for industrial use
|
GB/T 32117-2015
|
|
GB/T 32401-2015
|
Technical requirements and measurement methods for VHF/UHF frequency band radio monitoring receiver
|
GB/T 32401-2015
|
|
GB/T 3280-2015
|
Cold rolled stainless steel plate, sheet and strip
|
GB/T 3280-2015
|
|
GB/T 4369-2015
|
Lithium
|
GB/T 4369-2015
|
|
GB/T 1599-2014
|
Antimony ingot
|
GB/T 1599-2014
|
|
GB/T 16739.1-2014
|
Certification requirements for motor vehicle maintenance and repair enterprise -- Part 1: for motor vehicle maintenance and repair
|
GB/T 16739.1-2014
|
|
GB/T 19826-2014
|
General specification and safety requirements for DC power supply equipment of power projects
|
GB/T 19826-2014
|
|
GB/T 21268-2014
|
General technical conditions for garden patrol minibus
|
GB/T 21268-2014
|
|
GB/T 30519-2014
|
Determination of hydrocarbon types and benzene in light petroleum distillates and products -- Multidimensional gas chromatographic method
|
GB/T 30519-2014
|
|
GB/T 30976.1-2014
|
Industrial control system security -- Part 1: Assessment specification
|
GB/T 30976.1-2014
|
|
GB/T 31035-2014
|
Test methods for proton exchange membrane fuel cell stack at subzero environment
|
GB/T 31035-2014
|
|
GB/T 31037.1-2014
|
Fuel cell power system used for industrial lift truck applications -- Part 1: Safety
|
GB/T 31037.1-2014
|
|
GB/T 31037.2-2014
|
Fuel cell power system used for industrial lift truck applications -- Part 2: technical specification
|
GB/T 31037.2-2014
|
|
GB/T 31070.1-2014
|
Building intercom systems -- Part 1: General technical requirements
|
GB/T 31070.1-2014
|
|
GB/T 31167-2014
|
Information security technology -- Security guide of cloud computing services
|
GB/T 31167-2014
|
|
GB/T 31168-2014
|
Information security technology -- Security capability requirements of cloud computing services
|
GB/T 31168-2014
|
|
GB/T 31258-2014
|
Specifications of strop
|
GB/T 31258-2014
|
|
GB/T 5223-2014
|
Steel wire for prestressing of concrete
|
GB/T 5223-2014
|
|
GB/T 5224-2014
|
Steel strand for prestressed concrete
|
GB/T 5224-2014
|
|
GB/T 11446.10-2013
|
Test method for total bacterial count in electronic grade water by membrane filters
|
GB/T 11446.10-2013
|
|
GB/T 18204.3-2013
|
Examination methods for public places -- Part 3: Airborne microorganism
|
GB/T 18204.3-2013
|
|
GB/T 29658-2013
|
High-purity sputtering aluminium and aluminium alloy target used in electronic film
|
GB/T 29658-2013
|
|
GB/T 29838-2013
|
Fuel cell modules
|
GB/T 29838-2013
|
|
GB/T 30038-2013
|
Road vehicles -- Degrees of electrical equipment protection (IP-Code)
|
GB/T 30038-2013
|
|
GB/T 5008.1-2013
|
Lead-acid starter batteries -- Part 1: Technical conditions and methods of test
|
GB/T 5008.1-2013
|
|
GB/T 15704-2012
|
Road vehicles -- Light alloy wheels -- Impact test procedure
|
GB/T 15704-2012
|
|
GB/T 2423.18-2012
|
Environmental testing - Part 2: Test methods - Test Kb: Salt mist, cyclic (sodium chloride solution)
|
GB/T 2423.18-2012
|
|
GB/T 28300-2012
|
Surface quality classes for hot-rolled bars and rods technical delivery conditions
|
GB/T 28300-2012
|
|
GB/T 29091-2012
|
Copper and copper alloy designation and code system
|
GB/T 29091-2012
|
|
GB/T 29094-2012
|
Temper designations for copper and copper alloys
|
GB/T 29094-2012
|
|
GB/T 29304-2012
|
Safety guide for explosion protection in explosive hazardous areas
|
GB/T 29304-2012
|
|
GB/T 5117-2012
|
Covered electrodes for manual metal arc welding of non-alloy and fine grain steels
|
GB/T 5117-2012
|
|
GB/T 6003.1-2012
|
Test sieves -- Technical requirements and testing -- Part 1: Test sieves of metal wire cloth
|
GB/T 6003.1-2012
|
|
GB/T 6003.2-2012
|
Test sieves -- Technical requirements and testing -- Part 2: Test sieves of metal wire cloth
|
GB/T 6003.2-2012
|
|
GB/T 12716-2011
|
Pipe threads with the thread angle of 60 degrees where pressure-tight joints are made on threads
|
GB/T 12716-2011
|
|
GB/T 1346-2011
|
Test methods for water requirement of normal consistency, setting time and soundness of the Portland cement
|
GB/T 1346-2011
|
|
GB/T 14684-2011
|
Sand for construction
|
GB/T 14684-2011
|
|
GB/T 14685-2011
|
Pebble and crushed stone for construction
|
GB/T 14685-2011
|
|
GB/T 16935.4-2011
|
Insulation coordination for equipment within low-voltage systems -- Part 4: Consideration of high-frequency voltage stress
|
GB/T 16935.4-2011
|
|
GB/T 20042.6-2011
|
Proton exchange membrane fuel cell -- Part 6: Test method of bipolar plate properties
|
GB/T 20042.6-2011
|
|
GB/T 26992-2011
|
Specification for services on theme park
|
GB/T 26992-2011
|
|
GB/T 27553.1-2011
|
Specification of plastics-bronze-steel backing triple layer self-lubricating materials -- Part 1: Plastic overlay with modified PTFE
|
GB/T 27553.1-2011
|
|
GB/T 28004-2011
|
Disposal diapers
|
GB/T 28004-2011
|
|
GB/T 28183-2011
|
Test methods of fuel cell power system for bus
|
GB/T 28183-2011
|
|
GB/T 3634.2-2011
|
Hydrogen -- Part 2: Pore hydrogen, high pure hydrogen and ultrapure hydrogen
|
GB/T 3634.2-2011
|
|
GB/T 4844-2011
|
Pure helium, high pure helium and ultra-pure helium
|
GB/T 4844-2011
|
|
GB/T 15923-2010
|
Method for chemical analysis of nickel ores -- Determination of nickel content
|
GB/T 15923-2010
|
|
GB/T 16294-2010
|
Test method for settling microbe in clean room (zone) of the pharmaceutical industry
|
GB/T 16294-2010
|
|
GB/T 16716.2-2010
|
Packaging and packaging waste -- Part 2: Means and program for evaluation
|
GB/T 16716.2-2010
|
|
GB/T 16767-2010
|
Service quality in the amusement park
|
GB/T 16767-2010
|
|
GB/T 19584-2010
|
Specification on magnetic stripe data content and application for bank card
|
GB/T 19584-2010
|
|
GB/T 20564.4-2010
|
Continuously cold rolled high strength steel sheet and strip for automobile -- Part 4: High strength low alloy steel
|
GB/T 20564.4-2010
|
|
GB/T 20564.5-2010
|
Continuously cold rolled high strength steel sheet and strip for automobile -- Part 5: Isotropic steel
|
GB/T 20564.5-2010
|
|
GB/T 25180-2010
|
Technical requirements for integrated treatment and resource utilization of municipal solid waste
|
GB/T 25180-2010
|
|
GB/T 25307-2010
|
High-voltage direct current by-pass switches
|
GB/T 25307-2010
|
|
GB/T 25322-2010
|
Safety label of consumer product
|
GB/T 25322-2010
|
|
GB/T 2566-2010
|
Determination of transmittance for low rank coal
|
GB/T 2566-2010
|
|
GB/T 25985-2010
|
Protective of devices against unauthorized use of motor vehicles
|
GB/T 25985-2010
|
|
GB/T 26314-2010
|
Designation and composition of zirconium and zirconium alloys
|
GB/T 26314-2010
|
|
GB/T 3198-2010
|
Aluminium and aluminium alloys foils
|
GB/T 3198-2010
|
|
GB/T 12898-2009
|
Specification for the third and fourth order leveling
|
GB/T 12898-2009
|
|
GB/T 15114-2009
|
Aluminum alloy die castings
|
GB/T 15114-2009
|
|
GB/T 16578.2-2009
|
Plastics -- Film and sheeting -- Determination of tear resistance -- Part 2: Elmendorf method
|
GB/T 16578.2-2009
|
|
GB/T 19367-2009
|
Wood-based panels -- Determination of dimensions of panels
|
GB/T 19367-2009
|
|
GB/T 20042.3-2009
|
Proton exchange membrane fuel cell -- Part 3: Test method for proton exchange membrane
|
GB/T 20042.3-2009
|
|
GB/T 20042.4-2009
|
Proton exchange membrane fuel cell -- Part 4: Test method for electrocatalysts
|
GB/T 20042.4-2009
|
|
GB/T 20042.5-2009
|
Proton exchange membrane fuel cell -- Part 5: Test method for membrane electrode assembly
|
GB/T 20042.5-2009
|