|
Std ID |
Description (Standard Title) |
Detail |
|
GB/T 17213.17-2010
|
Industrial-process control valves -- Part 2-5: Flow capacity -- Sizing equations for fluid flow through multistage control valves with inter-stage recovery
|
GB/T 17213.17-2010
|
|
GB/T 10119-2008
|
Determination of dezincification corrosion resistance of brass
|
GB/T 10119-2008
|
|
GB/T 17213.2-2005
|
Industrial-process control valves -- Part 2-1: Flow capacity -- Sizing equations for fluid flow under installed conditions
|
GB/T 17213.2-2005
|
|
GB/T 17213.3-2005
|
Industrial-process control valves -- Part 3-1: Dimensions -- Face-to-face dimensions for flanged, two-way, globe-type, straight pattern and center-to-face dimensions for flanged, two-way, globe-type, angle pattern control valves
|
GB/T 17213.3-2005
|
|
GB/T 17213.4-2005
|
Industrial-process control valves -- Part 4: Inspection and routine testing
|
GB/T 17213.4-2005
|
|
GB/T 101-1986
|
Slotted raised countersunk head wood screws
|
GB/T 101-1986
|
|
GB/T 17213.5-1998
|
Industrial-process control valves. Part 5: Marking
|
GB/T 17213.5-1998
|
|
GB/T 17213.5-2008
|
Industrial-process control valves -- Part 5: Marking
|
GB/T 17213.5-2008
|
|
GB/T 17213.6-2005
|
Industrial-process control valves -- Part 6-1: Mounting details for attachment of positioners to control valves -- Positioner mounting on linear actuators
|
GB/T 17213.6-2005
|
|
GB/T 17213.7-1998
|
Industrial-process control valves. Part 7: Control valve data sheet
|
GB/T 17213.7-1998
|
|
GB/T 17213.8-1998
|
Industrial-process control valves. Part 8: Noise considerations. Section 1: Laboratory measurement of noise generated by aerodynamic flow through control valves
|
GB/T 17213.8-1998
|
|
GB/T 10120-1996
|
Metallic materials--Stress relaxation test
|
GB/T 10120-1996
|
|
GB/T 17213.9-2005
|
Industrial-process control valves -- Part 2-3: Flow capacity -- Test procedures
|
GB/T 17213.9-2005
|
|
GB/T 17214.1-1998
|
Industrial-process measurement and control equipment. Operating conditions. Part 1: Climatic conditions
|
GB/T 17214.1-1998
|
|
GB/T 17214.2-2005
|
Operating conditions for industrial-process measurement and control equipment -- Part 2: Power
|
GB/T 17214.2-2005
|
|
GB/T 17214.3-2000
|
Operating conditions for industrial-process measurement and control equipment. Part 3: Mechanical influences
|
GB/T 17214.3-2000
|
|
GB/T 17214.4-2005
|
Operating conditions for industrial-process measurement and control equipment -- Part 4: Corrosive and erosive influence
|
GB/T 17214.4-2005
|
|
GB/T 17215.101-2010
|
Electricity metering -- Data exchange for meter reading, tariff and load control -- Glossary of terms -- Part 1: Terms related to data exchange with metering equipment using DLMS/COSEM
|
GB/T 17215.101-2010
|
|
GB/T 17215.211-2006
|
Electricity metering equipment (a.c.) -- General requirements, tests and test conditions -- Part 11: Metering equipment
|
GB/T 17215.211-2006
|
|
GB/T 17215.301-2007
|
Particular requirements for multi-function electricity meters
|
GB/T 17215.301-2007
|
|
GB/T 17215.302-2013
|
Electricity metering equipment (a.c.) -- Particular requirements -- Part 2: Static harmonic meters for active energy
|
GB/T 17215.302-2013
|
|
GB/T 17215.303-2013
|
Electricity metering equipment (a.c.) -- Particular requirements -- Part 3: Digital input electricity meters
|
GB/T 17215.303-2013
|
|
GB/T 17215.311-2008
|
Electricity metering equipment (a.c.) -- Particular Requirements -- Part 11: Electromechanical meter for active energy (classes0.5, 1and2)
|
GB/T 17215.311-2008
|
|
GB/T 17215.321-2008
|
Electricity metering equipment (a.c.) -- Particular requirements -- Part 21: Static meters for active energy (classes 1 and 2)
|
GB/T 17215.321-2008
|
|
GB/T 17175.1-1997
|
Information technology. Open Systems Interconnection. Structure of management information. Part 1: Management Information Model
|
GB/T 17175.1-1997
|
|
GB/T 17175.2-1997
|
Information technology. Open Systems Interconnection. Structure of management information. Part 2: Definition of management information
|
GB/T 17175.2-1997
|
|
GB/T 17175.4-1997
|
Information technology. Open Systems Interconnection. Structure of management information. Part 4: Guidelines for the definition of managed objects
|
GB/T 17175.4-1997
|
|
GB/T 17176-1997
|
Information technology. Open Systems Interconnection. Application layer structure
|
GB/T 17176-1997
|
|
GB/T 17177.1-1997
|
Information technology--Text and office systems--Referenced data transfer--Part 1: Abstract service definition
|
GB/T 17177.1-1997
|
|
GB/T 17177.2-1997
|
Information technology--Text and office systems--Referenced Data Transfer--Part 2: Protocol specification
|
GB/T 17177.2-1997
|
|
GB/T 17178.1-1997
|
Information technology. Open Systems Interconnection. Conformance testing methodology and framework. Part 1: General concepts
|
GB/T 17178.1-1997
|
|
GB/T 17178.2-2010
|
Information technology -- Open system interconnection -- Conformance testing methodology and framework -- Part 2: Abstract test suite specification
|
GB/T 17178.2-2010
|
|
GB/T 17178.4-2010
|
Information technology -- Open systems interconnection -- Conformance testing methodology and framework -- Part 4: Test realization
|
GB/T 17178.4-2010
|
|
GB/T 17178.5-2011
|
Information technology -- Open systems interconnection -- Conformance testing methodology and framework -- Part 5: Requirement on test laboratories and clients for the conformance assessment process
|
GB/T 17178.5-2011
|
|
GB/T 17178.6-2010
|
Information technology -- Open System Interconnection -- Conformance testing methodology and framework -- Part 6: Protocol profile test specification
|
GB/T 17178.6-2010
|
|
GB/T 17178.7-2011
|
Information technology -- Open systems interconnection -- Conformance testing methodology and framework -- Part 7: Implementation conformance statements
|
GB/T 17178.7-2011
|
|
GB/T 17179.1-1997
|
Information technology--Protocol for providing the connectionless-mode network service--Part 1: Protocol specification
|
GB/T 17179.1-1997
|
|
GB/T 17179.1-2008
|
Information technology -- Protocol for providing -- The connectionless-mode network service -- Part 1: Protocol specification
|
GB/T 17179.1-2008
|
|
GB/T 17179.2-2000
|
Information technology. Protocol for providing the connectionless-mode network service. Part 2: Provision of the underlying service by an ISO/IEC 8802 (GB/T 15629) subnetwork
|
GB/T 17179.2-2000
|
|
GB/T 17179.3-2000
|
Information technology. Protocol for providing the connectionless-mode network service. Part 3: Provision of the underlying service by an X.25 subnetwork
|
GB/T 17179.3-2000
|
|
GB/T 17179.4-2000
|
Information technology. Protocol for providing the connectionless-mode network service. Part 4: Provision of the underlying service by a subnetwork that provides the OSI data link service
|
GB/T 17179.4-2000
|
|
GB/T 17180-1997
|
Information processing systems. Telecommunications and information exchange between systems. End system to intermediate system routeing exchange protocol for use in conjunction with the protocol for providing the connectionless-mode network service
|
GB/T 17180-1997
|
|
GB/T 17181-1997
|
Integrating-averaging sound level meters
|
GB/T 17181-1997
|
|
GB/T 17182-1997
|
Peak programme level meters
|
GB/T 17182-1997
|
|
GB/T 17183-1997
|
High speed 25-position interface for data terminal equipment and data circuit-terminating equipment, including alternative 26-position connector
|
GB/T 17183-1997
|
|
GB/T 17184-1997
|
Bayplan/stowage plan. Occupied and empty locations message
|
GB/T 17184-1997
|
|
GB/T 17185-1997
|
Steel pipe fittings for flanged joint
|
GB/T 17185-1997
|
|
GB/T 10118-1988
|
High purity gallium
|
GB/T 10118-1988
|
|
GB/T 17186.1-2015
|
Calculation methods for the pipe flange joints -- Part 1: Calculation method satisfies both strength and rigidity requirements
|
GB/T 17186.1-2015
|
|
GB/T 17186-1997
|
Calculating method for the strength of steel pipe flanged joint
|
GB/T 17186-1997
|
|
GB/T 17187-1997
|
Agricultural irrigation equipment--Emitter--Specification and test methods
|
GB/T 17187-1997
|
|
GB/T 17187-2009
|
Agricultural irrigation equipment -- Emitters and emitting pipe -- Specification and test methods
|
GB/T 17187-2009
|
|
GB/T 17188-1997
|
Aricultural irrigation equipment--Emitting-pipe systems--Speecification and test methods
|
GB/T 17188-1997
|
|
GB/T 17189-1997
|
Code for field measurement of vibrations and pulsations in hydraulic machines
|
GB/T 17189-1997
|
|
GB/T 17189-2007
|
Code for field measurement of vibrations and pulsation in hydraulic machines (turbines, storage pumps and pump-turbines)
|
GB/T 17189-2007
|
|
GB/T 17190-1997
|
Piezoelectric ceramic filters for use in electronic equipment. A specification in the quality assessment system for electronic components. Part 1: Generic specification. Qualification approval
|
GB/T 17190-1997
|
|
GB/T 17191.1-1997
|
Information technology. Coding of moving pictures and associated audio for digital storage media at up to about 1.5Mbit/s. Part 1: Systems
|
GB/T 17191.1-1997
|
|
GB/T 17191.2-1997
|
Information technology. Coding of moving pictures and associated audio for digital storage media at up to about 1.5Mbit/s. Part 2: Video
|
GB/T 17191.2-1997
|
|
GB/T 17191.3-1997
|
Information technology - Coding of moving pictures and associated audio for digital storage media at up to about 1.5Mbit/s - Part 3: Audio
|
GB/T 17191.3-1997
|
|
GB/T 17191.4-2000
|
Information technology. Coding of moving pictures and associated audio for digital storage media at up to about 1.5 Mbit/s. Part 4: Compliance testing
|
GB/T 17191.4-2000
|
|
GB/T 1719-1979
|
Determination of dyestuff fluidity
|
GB/T 1719-1979
|
|
GB/T 17192.1-1997
|
Information technology. Computer graphics. Interfacing techniques for dialogues with graphical devices (CGI). Part 1: Overview, profile, and conformance
|
GB/T 17192.1-1997
|
|
GB/T 17192.2-1997
|
Information technology. Computer graphics. Interfacing techniques for dialogues with graphical devices (CGI). Functional specification. Part 2: Control
|
GB/T 17192.2-1997
|
|
GB/T 17192.3-1997
|
Information technology. Computer graphics. Interfacing techniques for dialogues with graphical devices (CGI). Functional specification. Part 3: Output
|
GB/T 17192.3-1997
|
|
GB/T 17192.4-1998
|
Information technology. Computer graphics. Interfacing techniques for dialogues with graphical devices (CGI). Functional specification. Part 4: Segment
|
GB/T 17192.4-1998
|
|
GB/T 17192.5-2000
|
Information technology. Computer graphics. Interfacing techniques for dialogues with graphical devices (CGI). Functional specification. Part 5: Input and echoing
|
GB/T 17192.5-2000
|
|
GB/T 17192.6-2000
|
Information technology. Computer graphics. Interfacing techniques for dialogues with graphical devices (CGI). Functional specification. Part 6: Raster
|
GB/T 17192.6-2000
|
|
GB/T 17193-1997
|
Extra-heavy duty rigid steel conduits for electrical installations
|
GB/T 17193-1997
|
|
GB/T 17194-1997
|
Conduits for electrical purposes. Outside diameters of conduits for electrical installations and threads of conduits and fittings
|
GB/T 17194-1997
|
|
GB/T 17195-1997
|
Industrial furnace terminology
|
GB/T 17195-1997
|
|
GB/T 17197-1997
|
Belt drives--Grooved pulleys for joined classical V-belts (effective system)
|
GB/T 17197-1997
|
|
GB/T 17198-1997
|
Verification of Vickers hardness testers (less than HV 0. 2)
|
GB/T 17198-1997
|
|
GB/T 17199-1997
|
Calibration of Vickers hardness reference blocks (less than HV 0. 2)
|
GB/T 17199-1997
|
|
GB/T 17200-1997
|
Requirements for tensile, flexural and compression testing machines for rubbers and plastics
|
GB/T 17200-1997
|
|
GB/T 10118-2009
|
High purity gallium
|
GB/T 10118-2009
|
|
GB/T 1720-1979
|
Method of test for adhesion of paint films
|
GB/T 1720-1979
|
|
GB/T 17204-1998
|
Classification of alcoholic beverages
|
GB/T 17204-1998
|
|
GB/T 17204-2008
|
Classification of alcoholic beverages
|
GB/T 17204-2008
|
|
GB/T 17205-1998
|
Exchange of television programmes on magnetic tape
|
GB/T 17205-1998
|
|
GB/T 17206-1998
|
Fixed capacitors for use in electronic equipment. Part 18: Sectional specification. Fixed aluminium electrolytic chip capacitors with solid (MnO2) and non-solid electrolyte
|
GB/T 17206-1998
|
|
GB/T 17207-1998
|
Fixed capacitors for use in electronic equipment. Part 18: Blank detail specification. Fixed Aluminium electrolytic chip capacitors with solid (MnO) electrolyte. Assessment level E
|
GB/T 17207-1998
|
|
GB/T 17207-2012
|
Fixed capacitors for use in electronic equipment -- Part 18-1: Blank detail specification -- Fixed aluminium electrolytic surface mount capacitors with solid (MnO2) electrolyte -- Assessment level EZ
|
GB/T 17207-2012
|
|
GB/T 17208-1998
|
Fixed capacitors for use in electronic equipment. Part 18: Blank detail specification. Fixed Aluminium electrolytic chip capacitors with non-solid electrolyte. Assessment level E
|
GB/T 17208-1998
|
|
GB/T 17209-1998
|
Electromechanical switches for use in electronic equipment. Part 2: Sectional specification for rotary switches
|
GB/T 17209-1998
|
|
GB/T 17210-1998
|
Electromechanical switches for use in electronic equipment. Part 2: Sectional specification for rotary switches. Section 1-Blank detail specification
|
GB/T 17210-1998
|
|
GB/T 17211-1998
|
Loading guide for dry-type power transformers
|
GB/T 17211-1998
|
|
GB/T 1721-1979
|
Methods of test for appearance and transparency of varnishes, boiled oils and thinners
|
GB/T 1721-1979
|
|
GB/T 1721-2008
|
Determination of appearance and transparency of varnishes, boiled oils and thinners
|
GB/T 1721-2008
|
|
GB/T 17212-1998
|
Industrial-process measurement and control. Terms and definitions
|
GB/T 17212-1998
|
|
GB/T 17213.10-2005
|
Industrial-process control valves -- Part 2-4: Flow capacity -- Inherent flow characteristics and rangeability
|
GB/T 17213.10-2005
|
|
GB/T 17213.10-2015
|
Industrial-process control valves -- Part 2-4: Flow capacity -- Inherent flow characteristics and rangeability
|
GB/T 17213.10-2015
|
|
GB/T 17213.11-2005
|
Industrial-process control valves -- Part 3-2: Dimensions -- Face to face dimensions for rotary control valves except butterfly valves
|
GB/T 17213.11-2005
|
|
GB/T 17213.1-1998
|
Industrial-process control valves. Part 1: Control valve terminology and general considerations
|
GB/T 17213.1-1998
|
|
GB/T 17213.1-2015
|
Industrial-process control valves -- Part 1: Control valve terminology and general considerations
|
GB/T 17213.1-2015
|
|
GB/T 17213.12-2005
|
Industrial-process control valves -- Part 3-3: Dimensions -- End dimensions for buttweld, two-way, globe-type, straight pattern control valves
|
GB/T 17213.12-2005
|
|
GB/T 17213.13-2005
|
Industrial-process control valves -- Part 6-2: Mounting details for attachment of positioners to valves -- Positioner mounting on rotary actuators
|
GB/T 17213.13-2005
|
|
GB/T 17213.14-2005
|
Industrial-process control valves -- Part 8-2: Noise considerations -- Laboratory of noise generated by hydrodynamic flow through control valves
|
GB/T 17213.14-2005
|
|
GB/T 17213.15-2005
|
Industrial-process control valves -- Part 8-3: Noise considerations -- Control valves aerodynamic noise prediction method
|
GB/T 17213.15-2005
|
|
GB/T 17213.16-2005
|
Industrial-process control valves -- Part 8-4: Noise considerations -- Prediction of noise generated by hydrodynamic flow
|
GB/T 17213.16-2005
|
|
GB/T 10119-1988
|
Copper-zinc alloys--Determination of dezincification corrosion resistance
|
GB/T 10119-1988
|