|
Std ID |
Description (Standard Title) |
|
GB/T 33014.2-2025
|
Road vehicles - Component test methods for electrical/electronic disturbances from narrowband radiated electromagnetic energy - Part 2: Absorber-lined shielded enclosure
|
|
GB/T 33014.4-2025
|
Road vehicles - Component test methods for electrical/electronic disturbances from narrowband radiated electromagnetic energy - Part 4: Harness excitation methods
|
|
GB/T 20718.2-2025
|
Road vehicles - Connectors for the electrical connection of towing and towed vehicles (13-pole) - Part 2: 13-pole connectors for vehicles with 12 V nominal supply voltage intended to cross water fords
|
|
GB/T 45314-2025
|
Road vehicles - Performance requirements and test methods for hands free communication and voice interaction
|
|
GB/T 45315-2025
|
Technical requirements and test methods of vehicular information interactive systems based on LTE-V2X direct communication
|
|
GB/T 45500-2025
|
Automotive lidar performance requirements and test methods
|
|
GB/T 45529-2025
|
Road vehicles - Electrical electronic switching devices - Relay
|
|
GB/T 45627-2025
|
Inspection specification for automobile climatic wind tunnel
|
|
GB/T 20716.1-2025
|
Road vehicles - Connectors for the electrical connection of towing and towed vehicles(7-pole) - Part 1: Connectors for braking systems and running gears of vehicles with 24 V nominal supply voltage
|
|
GB/T 20716.2-2025
|
Road vehicles - Connectors for the electrical connection of towing and towed vehicles(7-pole) - Part 2: Connectors for braking systems and running gears of vehicles with 12 V nominal supply voltage
|
|
GB/T 33012.4-2025
|
Road vehicles - Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 4: Harness excitation methods
|
|
GB/T 45797-2025
|
Road vehicles - Low-voltage electrical system performance requirements and test methods
|
|
GB/T 44644.1-2024
|
Road vehicles - 50 Ω impedance radio frequency connection system interface - Part 1: Dimensions and electrical requirement
|
|
GB/T 44644.2-2024
|
Road vehicles - 50 Ω impedance radio frequency connection system interface - Part 2: Test procedures
|
|
GB/T 25085.1-2024
|
Road vehicles - Automotive cables - Part 1: Vocabulary and design guidelines
|
|
GB/T 45086.1-2024
|
Technical requirements and test methods for on-board positioning system - Part 1: Satellite positioning
|
|
GB/T 20717-2024
|
Road vehicles - Connectors for the electrical connection of towing and towed vehicles (15-pole) - 15-pole connector for vehicles with 24 V nominal supply voltage
|
|
GB/T 45120-2024
|
Road vehicles - Supply voltage of 48 V - Electrical requirements and tests
|
|
GB/T 25085.2-2024
|
Road vehicles - Automotive cables - Part 2: Test methods
|
|
GB/T 5054.1-2024
|
Road vehicles - Multi-core connecting cables - Part 1: Test methods and requirements for basic performance sheathed cables
|
|
GB/T 5054.2-2024
|
Road vehicles - Multi-core connecting cables - Part 2: Test methods and requirements for high performance sheathed cables
|
|
GB/T 5054.3-2024
|
Road vehicles - Multi-core connecting cables - Part 3: Construction, dimensions and marking of unscreened sheathed low-voltage cables
|
|
GB/T 5054.4-2024
|
Road vehicles - Multi-core connecting cables - Part 4: Test methods and requirements for coiled cable assemblies
|
|
GB/T 42691.1-2023
|
Road vehicles - Local Interconnect Network(LIN) - Part 1: General information and use case definition
|
|
GB/T 42691.2-2023
|
Road vehicles - Local Interconnect Network(LIN) - Part 2: Transport protocol and network layer services
|
|
GB/T 42691.3-2023
|
Road vehicles - Local Interconnect Network(LIN) - Part 3: Protocol specification
|
|
GB/T 42691.4-2023
|
Road vehicles - Local Interconnect Network(LIN) - Part 4: Electrical physical layer (EPL) specification 12 V/24 V
|
|
GB/T 42691.5-2023
|
Road vehicles - Local Interconnect Network(LIN) - Part 5: Application programmers interface (API)
|
|
GB/T 42691.6-2023
|
Road vehicles - Local Internet Network(LIN) - Part 6: Protocol conformance test specification
|
|
GB/T 42691.7-2023
|
Road vehicles - Local Interconnect Network(LIN) - Part 7: Electrical Physical Layer (EPL) conformance test specification
|
|
GB/T 42691.8-2023
|
Road vehicles - Local Interconnect Network(LIN) - Part 8: Electrical physical layer(EPL) specification: LIN over DC powerline(DC-LIN)
|
|
GB/T 33014.11-2023
|
Road vehicles - Component test methods for electrical/ electronic disturbances from narrowband radiated electromagnetic energy - Part 11: Reverberation chamber
|
|
GB/T 43187-2023
|
On-board wireless communication terminal
|
|
GB/T 43192.1-2023
|
Road vehicles - Interchange of digital information on electrical connections between towing and towed vehicles - Part 1: Physical and data-link layers
|
|
GB/T 43249-2023
|
Automotive passive infrared detection system
|
|
GB/T 43250-2023
|
Automotive active infrared detection system
|
|
GB/T 43258.2-2023
|
Road vehicles - Diagnostic communication over Internet Protocol (DoIP) - Part 2: Transport protocol and network layer services
|
|
GB/T 43258.3-2023
|
Road vehicles - Diagnostic communication over Internet Protocol (DoIP) - Part 3: Wired vehicle interface based on IEEE 802.3
|
|
GB/T 43258.4-2023
|
Road vehicles - Diagnostic communication over Internet Protocol (DoIP) - Part 4: Ethernet-based high-speed data link connector
|
|
GB/T 41484-2022
|
Automotive ultrasonic sensor assembly
|
|
GB/T 42284.1-2022
|
Road vehicles - Environmental conditions and testing for electrical and electronic equipment for drive system of electric propulsion vehicles - Part 1: General
|
|
GB/T 42284.3-2022
|
Road vehicles - Environmental conditions and testing for electrical and electronic equipment for drive system of electric propulsion vehicles - Part 3: Mechanical loads
|
|
GB/T 42284.4-2022
|
Road vehicles - Environmental conditions and testing for electrical and electronic equipment for drive system of electric propulsion vehicles - Part 4: Climatic loads
|
|
GB/T 42284.5-2022
|
Road vehicles - Environmental conditions and testing for electrical and electronic equipment for drive system of electric propulsion vehicles - Part 5: Chemical loads
|
|
GB/T 42289-2022
|
Leisure accommodation vehicle - Safety general requirements for the residential electric system
|
|
GB/T 39851.2-2021
|
Road vehicles - Diagnostic communication over Controller Area Network (DoCAN) - Part 2: Transport protocol and network layer services
|
|
GB/T 40430-2021
|
Road vehicles - Diagnostic communication over controller area network (DoCAN) - Dictionary
|
|
GB/T 40822-2021
|
Road vehicles - Unified diagnostic services
|
|
GB/T 25085.3-2020
|
Road vehicles--Automotive cables - Part 3: Dimensions and requirements for 30 V a. c. or 60 V d. c. single-core copper conductor cables
|
|
GB/T 38892-2020
|
On-board Driving Video Recording System
|
|
GB/T 25085.4-2020
|
Road vehicles--Automotive cables - Part 4: Dimensions and requirements for 30 V a. c. or 60 V d. c. single-core aluminium conductor cables
|
|
GB/T 33014.10-2020
|
Road vehicles. Component test methods for electrical/electronic disturbances from narrowband radiated electromagnetic energy - Part 10: Immunity to conducted disturbances in the extended audio frequency range
|
|
GB/T 33014.7-2020
|
Road vehicles. Component test methods for electrical/electronic disturbances from narrowband radiated electromagnetic energy - Part 7: Direct radio frequency power injection
|
|
GB/T 33014.8-2020
|
Road vehicles. Component test methods for electrical/electronic disturbances from narrowband radiated electromagnetic energy - Part 8: Immunity to magnetic fields
|
|
GB/T 33014.9-2020
|
Road vehicles - Component test methods for electrical/electronic disturbances from narrowband radiated electromagnetic energy - Part 9: Portable transmitters
|
|
GB/T 19951-2019
|
Road vehicles - Disturbances test methods for electrical/electronic component from electrostatic discharge
|
|
GB/T 28046.2-2019
|
Road vehicles -- Environmental conditions and testing for electrical and electronic equipment -- Part 2: Electrical loads
|
|
GB/T 38187-2019
|
Terminology of reliability for automotive electrical and electronics
|
|
GB/T 38444-2019
|
Electronic toll collection - On board unit
|
|
GB/T 34589-2017
|
Road vehicles - Diagnostic connector
|
|
GB/T 31465.6-2017
|
Road vehicles -- Fuse-links -- Part 6: Fuse-links with bolt-in contacts with high voltage
|
|
GB/T 31465.7-2017
|
Road vehicles -- Fuse-inks -- Part 7: Fuse-links with shortened tabs
|
|
GB/T 35175-2017
|
High speed on-off solenoid valve for automotive automatic transmission
|
|
GB/T 33012.1-2016
|
Road vehicles -- Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 1: General
|
|
GB/T 33012.2-2016
|
Road vehicles -- Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 2: Off-vehicle radiation sources
|
|
GB/T 33012.3-2016
|
Road vehicles -- Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 3: On-board transmitter simulation
|
|
GB/T 33012.4-2016
|
Road vehicles -- Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 4: Bulk current injection (BCI)
|
|
GB/T 33014.1-2016
|
Road vehicles -- Component test methods for electrical/electronic disturbances from narrowband radiated electromagnetic energy -- Part 1: General
|
|
GB/T 33014.2-2016
|
Road vehicles -- Component test methods for electrical/electronic disturbances from narrowband radiated electromagnetic energy -- Part 2: Absorber-lined shielded enclosure
|
|
GB/T 33014.3-2016
|
Road vehicles -- Component test methods for electrical/electronic disturbances from narrowband radiated electromagnetic energy -- Part 3: Transverse electromagnetic (TEM) cell
|
|
GB/T 33014.4-2016
|
Road vehicles -- Component test methods for electrical/electronic disturbances from narrowband radiated electromagnetic energy -- Part 4: Bulk current injection (BCI)
|
|
GB/T 33014.5-2016
|
Road vehicles -- Component test methods for electrical/electronic disturbances from narrowband radiated electromagnetic energy -- Part 5: Strip line
|
|
GB/T 32691-2016
|
Automobile A/C electromagnetic clutch
|
|
GB/T 31465.1-2015
|
Road vehicles -- Fuse-link -- Part 1: Definitions and general test requirements
|
|
GB/T 31465.2-2015
|
Road vehicles -- Fuse-link -- Part 2: Users guide
|
|
GB/T 31465.3-2015
|
Road vehicles -- Fuse-link -- Part 3: Fuse-link with blade type
|
|
GB/T 31465.4-2015
|
Road vehicles -- Fuse-link -- Part 4: Fuse-links with female contacts and bolt-in contacts
|
|
GB/T 31465.5-2015
|
Road vehicles -- Fuse-link -- Part 5: Fuse-links with axial terminals (strip fuse-links)
|
|
GB/T 30038-2013
|
Road vehicles -- Degrees of electrical equipment protection (IP-Code)
|
|
GB/T 28046.5-2013
|
Road vehicles -- Environmental conditions and testing for electrical and electronic equipment -- Part 5: Chemical loads
|
|
GB/T 28672-2012
|
The technical specifications for remanufacture of automotive components -- Alternator
|
|
GB/T 28673-2012
|
The technical specifications for remanufacturing of automotive components -- Starter
|
|
GB/T 28046.1-2011
|
Road vehicles -- Environmental conditions and testing for electrical and electronic equipment -- Part 1: General
|
|
GB/T 28046.2-2011
|
Road vehicles -- Environmental conditions and testing for electrical and electronic equipment -- Part 2: Electrical loads
|
|
GB/T 28046.3-2011
|
Road vehicles -- Environmental conditions and testing for electrical and electronic equipment -- Part 3: Mechanical loads
|
|
GB/T 28046.4-2011
|
Road vehicles -- Environmental conditions and testing for electrical and electronic equipment -- Part 4: Climatic loads
|
|
GB/T 26776-2011
|
Road vehicles -- Alarm systems for commercial vehicles of maximum authorized total mass greater than 3.5 t
|
|
GB/T 28045-2011
|
Road vehicles -- Electrical and electronic equipment for a supply voltage of 42 V -- Electrical loads
|
|
GB/T 25087-2010
|
Road vehicles -- Round, screened and unscreened 60V and 600V multi-core sheathed cables
|
|
GB/T 25089-2010
|
Road vehicles -- Data cables
|
|
GB/T 25085-2010
|
Road vehicles. 60V and 600V single-core cables
|
|
GB/T 25984.1-2010
|
Automobiles Electric Fuel Pump - Part 1: Brush Electric Fuel Pump
|
|
GB/T 5054.1-2008
|
Road vehicles -- Multi-core connecting cables -- Part 1: Test methods and requirements for basic performance sheathed cables
|
|
GB/T 5054.2-2008
|
Road vehicles -- Multi-core connecting cables -- Part 2: Test methods and requirements for high performance sheathed cables
|
|
GB/T 5053.1-2006
|
Road vehicles -- Connectors for the electrical connection of towing and towed vehicles-7-pole connector type 24 N (normal) for vehicles with 24 V nominal supply voltage
|
|
GB/T 5053.2-2006
|
Road vehicles - Connectors for the electrical connection of towing and towed vehicles. 7-pole connector type 12 N (normal) for vehicles with 12 V nominal supply voltage
|
|
GB/T 5053.3-2006
|
Road vehicles -- Connectors for the electrical connection of towing and towed vehicles -- Definitions tests and requirements
|
|
GB/T 5054.3-2006
|
Road vehicles -- Multicore connecting cables -- Part 3: Construction, dimensions and marking of unscreened sheathed low-voltage cables
|
|
GB/T 18487.1-2001
|
Electric vehicle conductive charging system -- Part 1: General requirements
|
|
GB/T 18487.2-2001
|
Electric vehicle conductive charging system -- Electric vehicles requirements for conductive connection to an AC/DC supply
|