|
Std ID |
Description (Standard Title) |
|
GB/T 16895.34-2018
|
Low-voltage electrical installations -- Part 7-753: Requirements for special installations or locations -- Heating cables and embedded heating systems
|
|
GB/T 17116.1-2018
|
Pipe supports and hangers -- Part 1: Technical specification
|
|
GB/T 17116.3-2018
|
Pipe supports and hangers -- Part 3: Middle connection attachments and building structure attachments
|
|
GB/T 17737.100-2018
|
Coaxial communication cables -- Part 1-100: Electrical test methods -- General requirements
|
|
GB/T 17737.101-2018
|
Coaxial communication cables -- Part 1-101: Electrical test methods -- Test for conductor d.c. resistance of cable
|
|
GB/T 17737.102-2018
|
Coaxial communication cables -- Part 1-102: Electrical test methods -- Test for insulation resistance of cable dielectric
|
|
GB/T 17737.103-2018
|
Coaxial communication cables -- Part 1-103: Electrical test methods -- Test for capacitance of cable
|
|
GB/T 17737.104-2018
|
Coaxial communication cables -- Part 1-104: Electrical test methods -- Test for capacitance stability of cable
|
|
GB/T 17737.105-2018
|
Coaxial communication cables -- Part 1-105: Electrical test methods -- Test for withstand voltage of cable dielectric
|
|
GB/T 17737.106-2018
|
Coaxial communication cables -- Part 1-106: Electrical test methods -- Test for withstand voltage of cable sheath
|
|
GB/T 17737.108-2018
|
Coaxial communication cables -- Part 1-108: Electrical test methods -- Test for characteristic impedance, phase and group delay, electrical length and propagation velocity
|
|
GB/T 17737.112-2018
|
Coaxial communication cables -- Part 1-112: Electrical test methods -- Test for return loss (uniformity of impedance)
|
|
GB/T 17737.115-2018
|
Coaxial communication cables -- Part 1-115: Electrical test methods -- Test for regularity of impedance (pulse/step function return loss)
|
|
GB/T 17737.122-2018
|
Coaxial communication cables -- Part 1-122: Electrical test methods -- Test for crosstalk between coaxial cables
|
|
GB/T 17737.200-2018
|
Coaxial communication cables -- Part 1-200: Environmental test methods -- General requirements
|
|
GB/T 17737.203-2018
|
Coaxial communication cables -- Part 1-203: Environmental test methods -- Test for water penetration of cable
|
|
GB/T 17737.205-2018
|
Coaxial communication cables -- Part 1-205: Environmental test methods -- Resistance to solvents and contaminating fluids
|
|
GB/T 17737.301-2018
|
Coaxial communication cables -- Part 1-301: Mechanical test methods -- Test for ovality
|
|
GB/T 17737.308-2018
|
Coaxial communication cables -- Part 1-308: Mechanical test methods -- Test for tensile strength and elongation for copper-clad metals
|
|
GB/T 17737.310-2018
|
Coaxial communication cables -- Part 1-310: Mechanical test methods -- Test for torsion characteristics of copper-clad metals
|
|
GB/T 17737.314-2018
|
Coaxial communication cables -- Part 1-314: Mechanical test methods -- Test for cable bending
|
|
GB/T 17737.316-2018
|
Coaxial communication cables -- Part 1-316: Mechanical test methods -- Test for maximum pulling force of cable
|
|
GB/T 17737.317-2018
|
Coaxial communication cables -- Part 1-317: Mechanical test methods -- Test for crush resistance of cable
|
|
GB/T 17737.318-2018
|
Coaxial communication cables -- Part 1-318: Mechanical test methods -- Heat performance tests
|
|
GB/T 17737.324-2018
|
Coaxial communication cables -- Part 1-324: Mechanical test methods -- Test for abrasion resistance of cable
|
|
GB/T 17737.325-2018
|
Coaxial communication cables -- Part 1-325: Mechanical test methods -- Aeolian vibration
|
|
GB/T 17854-2018
|
Solid wire electrodes/flux combinations for submerged arc welding of stainless steels
|
|
GB/T 11263-2005
|
The hot-rolled H and cut T section [including MODIFICATION 1]
|
|
GB/T 18502-2018
|
Critical current measurement -- DC critical current of Ag-and/or Ag alloy-sheathed Bi-2212 and Bi-2223 oxide superconductors
|
|
GB/T 19532-2018
|
Packaging material -- Volatile corrosion inhibiting film
|
|
GB/T 197-2018
|
General purpose metric screw threads -- Tolerances
|
|
GB/T 19972-2018
|
Sterilization of health care products -- Biological indicators -- Guidance for the selection, use and interpretation of results
|
|
GB/T 19973.2-2018
|
Sterilization of medical devices -- Microbiological methods -- Part 2: Tests of sterility performed in the definition, validation and maintenance of a sterilization process
|
|
GB/T 20223-2018
|
Cotton linter
|
|
GB/T 20485.33-2018
|
Methods for the calibration of vibration and shock transducers -- Part 33: Testing of magnetic field sensitivity
|
|
GB/T 20485.42-2018
|
Methods for the calibration of vibration and shock transducers -- Part 42: Calibration of seismometers with high accuracy using acceleration of gravity
|
|
GB/T 20501.4-2018
|
Public information guidance systems -- Design principles and requirements for guidance elements -- Part 4: Street guidance map
|
|
GB/T 20880-2018
|
Edible dextrose
|
|
GB/T 20935.1-2018
|
Metal materials -- Method of electromagnetic acoustic inspection -- Part 1: Standard guide for electromagnetic acoustic transducers (EMATs)
|
|
GB/T 20935.2-2018
|
Metal materials -- Method of electromagnetic acoustic inspection -- Part 2: Standard practice for ultrasonic testing using electromagnetic acoustic transducer (EMAT) techniques
|
|
GB/T 20935.3-2018
|
Metal materials -- Method of electromagnetic acoustic inspection -- Part 3: Standard practice for ultrasonic surface examinations using electromagnetic acoustic transducer (EMAT) techniques
|
|
GB/T 20961-2018
|
Single-rope mine drum hoist
|
|
GB/T 21231.1-2018
|
Acoustics -- Measurement of airborne noise emitted and structure-borne vibration induced by small air-moving devices -- Part 1: Airborne noise measurement
|
|
GB/T 21231.2-2018
|
Acoustics -- Measurement of airborne noise emitted and structure-borne vibration induced by small air-moving devices -- Part 2: Structure-borne vibration measurements
|
|
GB/T 21412.6-2018
|
Petroleum and natural gas industries -- Design and operation of subsea production systems -- Part 6: Subsea production control systems
|
|
GB/T 21412.7-2018
|
Petroleum and natural gas industries -- Design and operation of subsea production systems -- Part 7: Completion/workover riser systems
|
|
GB/T 22157-2018
|
Acoustics -- Specification of test tracks for measuring noise emitted by road vehicles and their tyres
|
|
GB/T 22319.11-2018
|
Measurement of quartz crystal unit parameters -- Part 11: Standard method for the determination of the load resonance frequency fL and the effective load capacitance C Leff using automatic network analyzer techniques and error correction
|
|
GB/T 22319.9-2018
|
Measurement of quartz crystal unit parameters -- Part 9: Measurement of spurious resonances of piezoelectric crystal units
|
|
GB/T 22344-2018
|
Polyester strapping for packaging
|
|
GB/T 22517.7-2018
|
Technical requirements and test methods for sports field -- Part 7: Tennis
|
|
GB/T 22586-2018
|
Electronic characteristic measurements -- Surface resistance of superconductors at microwave frequencies
|
|
GB/T 24218.15-2018
|
Textiles -- Test methods for nonwovens -- Part 15: Determination of air permeability
|
|
GB/T 24369.2-2018
|
Characterization of gold nanorods -- Part 2: Measurement methods for optical properties
|
|
GB/T 25742.3-2018
|
Condition monitoring and diagnostics of machines -- Data processing, communication and presentation -- Part 3: Communication
|
|
GB/T 26332.1-2018
|
Optics and photonics -- Optical coatings -- Part 1: Definitions
|
|
GB/T 29716.2-2018
|
Mechanical vibration and shock -- Signal processing -- Part 2: Time domain windows for Fourier Transform analysis
|
|
GB/T 29716.4-2018
|
Mechanical vibration and shock -- Signal processing -- Part 4: Shock-response spectrum analysis
|
|
GB/T 32392.5-2018
|
Information technology -- Metamodel framework for interoperability (MFI) -- Part 5: Metamodel for process model registration
|
|
GB/T 32392.7-2018
|
Information technology -- Metamodel framework for interoperability (MFI) -- Part 7: Metamodel for service model registration
|
|
GB/T 32392.8-2018
|
Information technology -- Metamodel framework for interoperability (MFI) -- Part 8: Metamodel for role and goal model registration
|
|
GB/T 32392.9-2018
|
Information technology -- Metamodel framework for interoperability (MFI) -- Part 9: On demand model selection
|
|
GB/T 3303-2018
|
Terminology of defects for domestic ceramics
|
|
GB/T 33767.4-2018
|
Information technology -- Biometric sample quality -- Part 4: Finger image data
|
|
GB/T 33842.5-2018
|
Information technology -- Conformance testing methodology for biometric data interchange formats defined in GB/T 26237 -- Part 5: Face image data
|
|
GB/T 35001-2018
|
Microwave circuits -- Measuring methods for noise source
|
|
GB/T 35002-2018
|
Microwave circuits -- Measuring methods for frequency source
|
|
GB/T 35003-2018
|
Test methods for endurance and data retention of non-volatile memory
|
|
GB/T 35004-2018
|
Logic digital integrated circuits -- Specification for I/O interface model for integrated circuit
|
|
GB/T 35005-2018
|
Test methods for flip chip integrated circuits
|
|
GB/T 35006-2018
|
Semiconductor integrated circuits -- Measuring method of level converter
|
|
GB/T 35007-2018
|
Semiconductor integrated circuits -- Measuring method of low voltage differential signaling circuitry
|
|
GB/T 35008-2018
|
Specification for serial NOR flash interface
|
|
GB/T 35009-2018
|
Specification for serial NAND flash interface
|
|
GB/T 35010.1-2018
|
Semiconductor die products -- Part 1: Requirements for procurement and use
|
|
GB/T 35010.2-2018
|
Semiconductor die products -- Part 2: Exchange data formats
|
|
GB/T 35010.3-2018
|
Semiconductor die products -- Part 3: Guide for handling, packing and storage
|
|
GB/T 35010.4-2018
|
Semiconductor die products -- Part 4: Requirements for die users and suppliers
|
|
GB/T 35010.5-2018
|
Semiconductor die products -- Part 5: Requirements for concerning electrical simulation
|
|
GB/T 35010.6-2018
|
Semiconductor die products -- Part 6: Requirements for concerning thermal simulation
|
|
GB/T 35010.7-2018
|
Semiconductor die products -- Part 7: XML schema for data exchange
|
|
GB/T 35010.8-2018
|
Semiconductor die products -- Part 8: EXPRESS model schema for data exchange
|
|
GB/T 35011-2018
|
Microwave circuits -- Measuring methods for voltage-controlled oscillator
|
|
GB/T 35403.3-2018
|
National articles numbering and basic information specification -- Part 3: Means of production
|
|
GB/T 35979-2018
|
Technical specification for selection, installation, use and maintenance of metal bellows expansion joints
|
|
GB/T 35990-2018
|
Metal bellows expansion joints for pressure piping
|
|
GB/T 35991-2018
|
Inspection of grain and oils -- Steamed buns of wheat flour processing quality evaluation
|
|
GB/T 35992-2018
|
Grain and oil machinery -- Volumetric wheat measurer
|
|
GB/T 35993-2018
|
Grain and oil machinery -- Glutomatic instruments
|
|
GB/T 35994-2018
|
Grain and oil machinery -- Extensograph
|
|
GB/T 35995-2018
|
Carbon monoxide
|
|
GB/T 35996-2018
|
Rapid determination of eight elements content for phosphate rock and concentrate -- X-ray fluorescence spectrometry
|
|
GB/T 35997-2018
|
Ecological security port -- Categorization, recognition and management for ecological risk
|
|
GB/T 35998-2018
|
Determination of sucrose, brix and fibre in cane and bagasse -- The wet disintegrator method
|
|
GB/T 35999.3-2018
|
Prerequisite programmes on food safety -- Part 3: Farming
|
|
GB/T 35999.4-2018
|
Prerequisite programmes on food safety -- Part 4: Food packaging manufacturing
|
|
GB/T 36003-2018
|
Food can made of tinplate or electrolytic chromium-coated steel (ECCS)
|
|
GB/T 36004-2018
|
Food contact surfaces cleaning and disinfection efficacy test method -- ATP bioluminescence method
|
|
GB/T 36005-2018
|
Measuring methods of optical radiation safety for semiconductor lighting equipment and systems
|
|
GB/T 36006-2018
|
Control and communication network -- Safety-over-Ether CAT specification
|