Home Cart Quotation About-Us
www.ChineseStandard.net
SEARCH

GB/T 21412.7-2018 English PDF

Standard IDUSDBUY PDFLead-DaysStandard Title (Description)Status
GB/T 21412.7-2018RFQ ASK 3 days Petroleum and natural gas industries -- Design and operation of subsea production systems -- Part 7: Completion/workover riser systems Valid

Similar standards

GB/T 21447   SY/T 5164   SY/T 5324   GB/T 21412.2   GB/T 21412.11   GB/T 21412.10   

Basic data

Standard ID: GB/T 21412.7-2018 (GB/T21412.7-2018)
Description (Translated English): Petroleum and natural gas industries -- Design and operation of subsea production systems -- Part 7: Completion/workover riser systems
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: E94
Classification of International Standard: 75.180.10
Word Count Estimation: 194,136
Date of Issue: 2018-03-15
Date of Implementation: 2018-10-01
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 21412.7-2018: Petroleum and natural gas industries -- Design and operation of subsea production systems -- Part 7: Completion/workover riser systems


---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Petroleum and natural gas industries--Design and operation of subsea production systems--Part 7. Completion/workover riser systems ICS 75.180.10 E94 National Standards of People's Republic of China Oil and gas industry Design and operation of underwater production systems Part 7. Completion or workover riser system Part 7. Completion/workoverrisersystems (ISO 13628-7.2005, IDT) Published on.2018-03-15 2018-10-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China China National Standardization Administration issued

Content

Foreword V 1 Scope 1 2 Normative references 1 3 Terms, definitions, abbreviations and symbols 4 3.1 Terms and Definitions 4 3.2 Abbreviations 18 3.3 Symbol 18 4 system requirements 23 4.1 Purpose 23 4.2 Completion or workover riser system description 23 4.3 System Engineering 23 4.4 System Definition 25 4.5 System Design 25 4.6 System Review 25 4.7 Operating mode 26 4.8 Design Principles 34 4.9 Principles of Operation 34 4.10 Safety Principles 34 4.11 Safety Barrier Requirements 34 4.12 Regulations, Specifications and Standards 34 4.13 Operational Requirements 36 4.14 Organization and personnel qualification requirements 38 4.15 Quality System 38 4.16 Archiving, Recording and Traceability 38 4.17 Verification 38 4.18 Party A/User Responsibility 39 4.19 Manufacturer's Responsibilities 39 5 Functional requirements 39 5.1 Purpose 39 5.2 System function requirements 39 5.3 Path requirements 39 5.4 Component Requirements 41 5.5 Workover Control System 54 6 Design Requirements 60 6.1 Purpose 60 6.2 Design Principles 60 6.3 Load and load effects 62 6.4 Component Design Standards 70 6.5 Body Design Guidelines 75 6.6 Connector 80 6.7 Design criteria for other components 83 7 Materials and Manufacturing 84 7.1 Introduction 84 7.2 General requirements for materials 84 7.3 Product 90 7.4 Production and Manufacturing 93 7.5 Visual inspection and non-destructive testing 95 7.6 Assembly (installation) procedures and qualifications for assembly equipment 96 8 test 96 8.1 Overview 96 8.2 Pre-test requirements 96 8.3 Stress Test 96 8.4 Hydraulic fluid cleanliness 97 8.5 Compliance Test 97 8.6 riser and FAT 97 8.7 Workover Control System and FAT 98 8.8 System Integration Test 98 8.9 System Stress Test 99 9 Marking, storage and transport 99 9.1 riser 99 9.2 Parts 100 9.3 Workover Control System and Hydraulic Equipment 100 10 Inspection, maintenance, reassessment and monitoring 100 10.1 Overview 100 10.2 Inspection and Maintenance 100 10.3 Reevaluation of the riser 101 10.4 Monitoring 102 11 Documentation 102 11.1 Use 102 11.2 Overview 102 11.3 Design basis 102 11.4 Design Analysis 103 11.5 Connector file 104 11.6 Production and manufacturing 106 11.7 Completion Document 106 11.8 Design and Manufacturing History 107 11.9 Installation and Operation Manual 107 11.10 Working condition history 107 11.11 File Archive 108 Appendix A (informative) Completion or workover riser interface (vertical tree) standardization 109 Appendix B (informative) Working mode and overall analysis of the riser system 112 Appendix C (Informative Appendix) Fatigue Analysis and Assessment 128 Appendix D (Normative Appendix) Structural Resistance Analysis Method 151 Appendix E (informative) Example calculation of pipe pressure design 158 Appendix F (informative) Procurement Guide 161 Appendix G (informative) Bolt preload 174 Appendix H (informative) Seal 178 Appendix I (Normative) Connector quality requirements 180 References 186

Foreword

GB/T 21412 "Design and Operation of Underwater Production System for Oil and Gas Industry" is divided into fifteen parts. --- Part 1. General requirements and recommended practices; --- Part 2. Flexible pipe systems for subsea and offshore; --- Part 3. Over-the-out pipe (TFL) system; --- Part 4. Underwater wellhead installations and tree equipment; --- Part 5. Underwater umbilical cable; ---Part 6. Underwater production control system; --- Part 7. Completion or workover riser system; --- Part 8. Underwater robot (ROV) interface for underwater production systems; ---Part 9. Remote Operation Tool (ROT) Maintenance System; ---Part 10. Adhesive flexible pipe specifications; --- Part 11. Flexible pipe systems for seabed and ocean; --- Part 12. Dynamic production riser; --- Part 13. Remote operation tools and interfaces for underwater production systems; --- Part 14. Underwater high integrity pressure protection system; --- Part 15. Underwater structures and manifolds. This part is part 7 of GB/T 21412. This part is drafted in accordance with the rules given in GB/T 1.1-2009. This section uses the translation method equivalent to ISO 13628-7.2005 "Design and operation of the underwater production system of the oil and gas industry. Part 7. Completion or workover riser system (English version). The documents of our country that have a consistent correspondence with the international documents referenced in this part are as follows. ---GB/T 20972 (all parts) Oil and gas industry oil and gas mining for materials containing hydrogen sulfide [ISO 15156 (all parts)] ---GB/T 22513-2013 Oil and gas industry drilling and production equipment wellhead facilities and tree equipment (ISO 10423.2009, MOD) ---GB/T 28259-2012 Oil and gas industry downhole equipment downhole safety valve equipment (ISO 10432.2004, MOD) This part is proposed and managed by the National Oil and Gas Standardization Technical Committee (SAC/TC355). This section drafted by. CNOOC Research Institute. The main drafters of this section. Xu Liangbin, Sheng Leixiang, Wang Yu, Wang Rongyao, Jiang Shiquan, Zheng Lijun. Oil and gas industry Design and operation of underwater production systems Part 7. Completion or workover riser system

1 Scope

This part of GB/T 21412 specifies the design, analysis, materials, manufacturing, testing and design of underwater completion or workover (C/WO) riser systems. Requirements and recommendations for installation from floating installations. This section applies to all new completion or workover riser systems, as well as adjustments and operations for existing systems, as well as Reuse of locations and different floating installations. This section is limited to risers made of low alloy carbon steel. Made of special materials such as titanium and composite materials The riser made of flexible pipe is outside the scope of this section. This section includes the following equipment. ---Water pipe single root; ---Connector; ---Workover control system; --- Ground flow test tree; --- Ground test tree lifting frame; ---The lower workover riser assembly; ---Blowout valve; ---Conduit valve; ---Underwater test tree; ---Cut short section; ---Tubing hanging positioning system; ---Drilling faucet; --- Annulus circulation hose; ---Water separator chuck; ---Umbilical cord cable clamp; ---Installation and testing tools; ---The tree hat is placed under the tool. The relevant equipment not included in this section is as follows. ---Tubing hanging; ---The inner and outer caps of the tree; ---Tubing hanging into the tool; --- Ground coiled tubing system; ---Ground cable operating system; --- Ground test tree killing and production of jumper.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. IEC 60089-0 Electrical equipment for explosive atmospheres - Part 0. General requirements, fourth edition (Electricalapparatusfor explosivegasatmospheres-Part0.GeneralRequirements,FourthEdition) ISO 148 steel Charpy impact test (V-shaped cut) [Steel-Charpyimpacttest (V-notch)] ISO 377 Steel and Steel Products Mechanical Properties Test Sampling Location and Sample Preparation (Steelandsteelproducts-Location Andpreparationofsamplesandtestpiecesformechanicaltesting) ISO 783 metal material high temperature tensile test (Metalicmaterials-Tensiletestingatelevatedtemperature) Carbon steel and cast steel - Casting fasteners - Mechanical properties - Part 1. Bolts, screws and studs (Mechanicalproper- tiesoffastenersmadeofcarbonsteelandaloysteel-Part 1.Bolts,screwsandstuds) Mechanical properties of fasteners - Part 2. Nuts with specified test load values - coarse thread (Mechanical propertiesoffasteners-Part 2. Nutswithspecifiedproofloadvalues-Coarsethread) ISO 1461 Specification for hot dip galvanized coatings and test methods for iron and steel preforms (Hotdipgalvanizedcoatingsonfabri- catedironandsteelarticles-Specificationsandtestmethods) ISO 2566-1 Conversion of steel elongation values Part 1. Carbon steel and low alloy steel (Steel-Conversion of elongation values-Part 1. Carbonandlowaloysteels) ISO 3183 (all parts) Oil and gas industry pipeline steel pipe supply technical conditions (Petroleumandnaturalgas industries-Steelpipeforpipelines-Technicaldeliveryconditions) ISO 4885 Iron Products Heat Treatment Vocabulary (Ferrousproducts-Heattreatment-Vocabulary) ISO 6507-1 Metallic materials - Vickers hardness test - Part 1 . Test method (Metalicmaterials-Vickers hardnesstest-Part 1. Testmethod) ISO 6892 metal material ambient temperature tensile test (Metalicmaterials-Tensiletestingatambienttemper- Nature) Steel forgings and rolled or forged pipes for pressure applications - Part 1 . General requirements (Steel forgingsandroledorforgedbarsforpressurepurposes-Technicaldeliveryconditions-Part 1.Gen- Eralrequirements) ISO 9606-1 welder acceptance test fusion welding Part 1. Steel (Approvaltestingofwelders-Fusionweld- ing-Part 1. Steels) ISO 9712 non-destructive testing personnel qualification and certification (Non-destructive testing-Qualificationandcertifi- Cationofpersonnel) ISO 10423 Oil and gas industry drilling and production equipment wellhead facilities and tree equipment (Petroleumand naturalgasindustries-Drilingandproductionequipment-Welheadandchristmastreeequipment) ISO 10432 Underground safety valve equipment for underground equipment in the oil and gas industry (PetroleumAndNaturalGasIndus- tries-DownholeEquipment-SubsurfaceSafetyValveEquipment) ISO 10474 Steel and Steel Products Inspection Document (Steelandsteelproducts-Inspectiondocuments) ISO 10945 Hydraulic Transmission Pressure Accumulator Valve Dimensions (Hydraulicfluidpower-Gas-loadedaccumula- tors-Dimensionsofgasports) ISO 11960.2004 oil and gas industry oil well casing and tubing steel pipe (Petroleum and naturalgasindus- tries-Steelpipesforuseascasingortubingforwels-Specification) ISO 11961 oil and gas industry steel pipe for drill pipe - Specification (Petroleum and naturalgasindustries-Steel Pipesforuseasdrilpipe-Specification) ISO 13533 Oil and gas industry drilling and production equipment drilling equipment drilling equipment (Petroleumandnatural gasindustries-Drilingandproductionequipment-Dril-throughequipment) ISO 13535 Oil and gas industry drilling and production equipment lifting equipment (Petroleum and naturalgasin- dustries-Drilingandproductionequipment-Hoistingequipment) ISO 13628-2 Design and operation of underwater production systems for the oil and gas industry - Part 2. Sexual tube system (Petroleum and naturalgasindustries-Designandoperationofsubseaproductionsystems- Part 2. Unbondedflexiblepipesystemsforsubseaandmarineapplications) ISO 13628-4.1999 Design and operation of underwater production systems - Part 4. Underwater wellheads And tree equipment (Petroleum and naturalgasindustries-Designandoperationofsubseaproductionsys- tem-Part 4. Subseawelheadandtreeequipment) ISO 13628-5.2002 Design and operation of underwater production systems - Part 5. Underwater umbilical (Petroleum and naturalgasindustries-Designandoperationofsubseaproductionsystem-Part 5. Subseaumbilicals) ISO 13628-6.2000 Design and operation of underwater production systems - Part 6. System (Designandoperationofsubseaproductionsystem -Part 6.Subseaproductioncontrolsystem) ISO 14693 Oil and gas industry drilling and downhole equipment (Petroleum and naturalgasindustries-Dril- Ingandwel-servicingequipment) ISO 15156 (all parts) Materials used in oil and gas industry for oil and gas production (Petroleumand) naturalgasindustries-MaterialsforuseinH2S-containingenvironmentsinoilandgasproduction) ISO 15579 Metallic Materials Low Temperature Tensile Test (Metalicmaterials-Tensiletestingatlowtemperature) ISO 17025 calibration and testing laboratory capability requirements (Generalrequirementsforthecompetenceoftesting Andcalibrationlaboratories) APISpec16C Throttling and Killing System (Specificationforchokeandkilsystems) APIRP17B Flexible Pipe Recommended Practice (Recommendedpracticeforflexiblepipe) ASME Boiler and Pressure Vessel Code, Volume VIII..2001, Volume 1. Pressure Vessel Construction Rules (Boilerandpressure Vesselcode, Section VIII..2001, Rulesforconstructionofpressurevessels, Division1) ASME Boiler and Pressure Vessel Code, Volume IX..2001, Welding and Brazing Assessment (Boilerandpressurevesselcode, Section IX..2001, Weldingandbrazingqualification) ASTMA193 alloy steel and stainless steel bolt material at high temperatures (Standardspecificationforaloy-steelandstain- Lesssteelboltingmaterialsforhigh-temperatureservice) ASTMA194 Standard Specification for Carbon Steel and Alloy Steel Nuts for High Temperature and High Pressure Bolts (Standardspecificationfor Carbonandaloysteelnutsforboltsforhighpressureandhightemperatureservice) ASTMA320 alloy steel and stainless steel bolt material at low temperatures (Standardspecificationforaloy-steelandstain- Lesssteelboltingmaterialsforlow-temperatureservice) Standard Test Methods and Definitions for Mechanical Testing of ASTMA370 Steel Products (Standardtestmethodsanddefinitionsfor Mechanicaltestingofsteelproducts) Standard Specification for Tempered and Quenched Vacuum Carbon Steel and Alloy Steel Forgings for ASTMA508 Pressure Vessels (Standard) Specificationforquenchedandtemperedvacuum-treatedcarbonandaloysteelforgingsforpressure Vessels) Hydraulic fluid power-loaded accumulators - Part 1 . Specification for seamless steel accumulators (Hydro-pneumaticaccumulatorsforfluidpowerpurposes-Part 1.Specificationforseamlesssteelac- Cumululatorbodiesabove0,5lwatercapacity) EN287-1 Welding wage test fusion welding Part 1. Steel (Qualificationtestofwelders-Fusionwelding- Part 1. Steels) EN288 Welding procedure specification and approval for metal materials (Specificationandapprovalofweldingproceduresforme- Talicmaterials) EN1418 Welding operator welding of metal materials for all-mechanical welding and welding and welding of resistance welding positioners Approval test for personnel (Weldingpersonnel-Approvaltestingofweldingoperatorsforfusionweldingand Resistanceweldsettersforfulymechanizedandautomaticweldingofmetalicmaterials) Standard marking method for MSSSP-25 valves, fittings, flanges and pipe connections (Standardmarkingsystemsforvalves, Fittings,flangesandunions) SAEAS4059 Aerospace hydraulic systems for cleanliness of hydraulic fluids (Aerospacefluidpower-Cleanliness Classificationforhydraulicsystems) 3 terms, definitions, abbreviations and symbols 3.1 Terms and definitions The following terms and definitions apply to this document. 3.1.1 Agreement agreement Unless otherwise stated, “agreement” means “an agreement between the manufacturer and Party A at the time of enquiry and ordering”. 3.1.2 Wet weight wetweight Includes internal fluid weight minus wet weight of buoyancy. 3.1.3 Auxiliary pipeline auxiliaryline Auxiliary lines outside the riser main pipe (excluding throttling and kill lines). For example. hydraulic supply lines and annulus circulation lines. 3.1.4 Ball joint baljoint A ball and ball groove assembly having a center passage equal to or greater than the inner diameter of the riser. Note. It can be placed in the riser string to reduce local bending stress. 3.1.5 Barrier barrier One or more barrier units designed to avoid accidental formation fluid intrusion. 3.1.6 Barrier element barrierelement As a single component, it is not possible in itself to avoid components that flow from one side to the other. 3.1.7 Extrusion stress bearingstress The average normal stress acting on the interface of the abutting surface. 3.1.8 Blowout preventer blow-outpreventer; BOP Installed at the wellhead to isolate the casing annulus pressure, or the wellbore pressure of the open hole during drilling, completion, testing, or workover. 3.1.9 BOP stack BOPstack The well control equipment assembly includes a blowout preventer, a cross, a valve, a hydraulic connector, and a throttling line connected to the subsea wellhead. Note. In most cases, the term sometimes includes LMRP. 3.1.10 Buoyancy block buoyancymodule The low specific gravity material structure, usually a foamed polymer, is bundled or stuck on the outside of the riser to reduce the wet weight of the riser. 3.1.11 Calculate calculation Study the structural safety of components/systems by methods based on analytical formulas or numerical simulations, such as finite element methods or boundary element methods. 3.1.12 Charpy test Charpytest A test showing fracture toughness in terms of energy absorption, lateral expansion, or fracture appearance. 3.1.13 Throttle and kill line choke-and-killine Arranged circumferentially along the periphery of the riser to circulate fluid into and out of the wellbore and control the peripheral pipe line of the well pressure. 3.1.14 Connector connector Used to connect adjacent components of the riser system to form a joint that withstands loads and prevents leakage. For example. thread type, including (i) an externally threaded connection (male), an internally threaded fitting (mother) and seal (S), or (i) two male and one connections Short section and seal ring (s); flange type. including two flanges, bolts and washers/seal ring; clamp type, including hoop, clamp, bolt and seal ring (s); pin type Connector. 3.1.15 Control module controlmodule The system assembly of the platform to control the underwater equipment is realized by pilot or sequential hydraulic or electrohydraulic operation. Note. It can be configured as a riser control module for the tubing hanging mode to be sent to the column work, or as a workover control module, in the oil tree mode. Department workover assembly operations. 3.1.16 Completion riser completionriser Temporary riser for completion operations in blowout preventers and drilling risers. Note. Completion operations are carried out in the drilling riser. Completion risers can also be used for open water workovers. 3.1.17 Completion or workover riser completion/workoverriser Temporary riser for completion or workover operations. 3.1.18 Component Pressure equipment components are the basic unit of calculation and analysis. Note. Including structural components such as pipe body, joints, stress short sections, tensioners, mounting blocks, telescopic nipples, tubing hanging directional short sections, adapters Wait. 3.1.19 Corrosion allowance corrosionalowance The safety margin of the wall or part design wall thickness, considering materials due to corrosion, scale, ......
Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 21412.7-2018_English be delivered?

Answer: Upon your order, we will start to translate GB/T 21412.7-2018_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 21412.7-2018_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 21412.7-2018_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.