|
Std ID |
Description (Standard Title) |
|
GB/T 14313-1993
|
Rigid precision coaxial lines and their associated precision connectors, Generic specification of
|
|
GB/T 14557-1993
|
Electrical tests and measuring procedures for ridio-frequency connectors: Reflection factor
|
|
GB/T 14865-1993
|
R. F coaxial connectors of type SMB
|
|
GB/T 13712-1992
|
Fibre optic modulators. Part 1: Generic specification
|
|
GB/T 13949-1992
|
Application characteristics for 21-pin connector in video systems
|
|
GB/T 12793-1991
|
Generic specification for installing and removal tools for connectors electrical contact
|
|
GB/T 12270-1990
|
Electrical tests and measuring procedures for radio-frequency coaxial connectors screening effectiveness
|
|
GB/T 12271-1990
|
Measuring methods of RF insertion loss for radio-frequency coaxial connectors
|
|
GB/T 12272-1990
|
Measuring method of radio-frequency high potential withstanding voltage for radio-frequency coaxial connectors
|
|
GB/T 12507-1990
|
Connectors for optical fibres and cables--Part 1: Generic specification
|
|
GB/T 9020-1988
|
Visual-frequency coaxial connectors, Generic specification of
|
|
GB/T 9538-1988
|
General specification of flat cable connector
|
|
GB/T 16514.2-2005
|
Electromechanical switches for use in electronic equipment -- Part 5: Sectional specification for pushbutton switches -- Section 1: Blank detail specification
|
|
GB/T 18496.2-2005
|
Electromechanical switches for use in electronic equipment -- Part 4-1: Sectional specification for lever (toggle) switches -- Blank detail specification
|
|
GB/T 18496-2001
|
Electromechanical switches for use in electronic equipment -- Part 4: Sectional specification for lever (toggle) switches
|
|
GB/T 13419-1998
|
Electromechanical switches for use in electronic equipment. Part 6: Sectional specification for sensitive switches
|
|
GB/T 13420-1998
|
Electromechanical switches for use in electronic equipment. Part 6: Sectional specification for sensitive switches. Section 1: Blank detail specification
|
|
GB/T 17209-1998
|
Electromechanical switches for use in electronic equipment. Part 2: Sectional specification for rotary switches
|
|
GB/T 17210-1998
|
Electromechanical switches for use in electronic equipment. Part 2: Sectional specification for rotary switches. Section 1-Blank detail specification
|
|
GB/T 16514-1996
|
Electromechanical switches for use in electronic equipment. Part 5: Sectional specification for pushbutton switches
|
|
GB/T 15461-1995
|
Electromechanical switches for use in electronic equipments. Part 3: Sectional specification for in-line package switches
|
|
GB/T 15462-1995
|
Electromechanical switches for use in electronic equipments. Part 3-1: Blank detail specification for in-line package switches
|
|
GB/T 9536-1995
|
Electromechanical switches for use in electronic equipment. Part 1: Generic specification
|
|
GB/T 14120-1993
|
Dimensions for the mounting of single-hole, bush-mounted, spendle-operated electronic components
|
|
GB/T 14280-1993
|
Thermal time delay switch, Generic specification of
|
|
GB/T 14281-1993
|
Thermostatic switch, Generic specification of
|
|
GB/T 13419-1992
|
Electromechanical switches for electronic equipment--Part 6: sectional specification--Sensitive switches
|
|
GB/T 13420-1992
|
Electromechanical switches for electronic equipment Part 6: blank detail specification sensitive switches
|
|
GB/T 9537-1988
|
Keyboard switches for use in electronic equipment. Part 1: Generic specification
|
|
GB/T 12274.401-2023
|
Quartz crystal controlled oscillators of assessed quality - Part 4-1: Blank detail specification - Capability approval
|
|
GB/T 22317.401-2023
|
Piezoelectric filters of assessed quality - Part 4-1: Blank detail specification - Capability approval
|
|
GB/T 22317.4-2023
|
Piezoelectric filters of assessed quality - Part 4: Sectional specification - Capability approval
|
|
GB/T 22318.1-2023
|
Surface acoustic wave (SAW) resonators - Part 1: Generic specification
|
|
GB/T 22318.2-2023
|
Surface acoustic wave (SAW) resonators - Part 2: Guide to the use
|
|
GB/T 22319.6-2023
|
Measurement of quartz crystal unit parameters - Part 6: Measurement of drive level dependence (DLD)
|
|
GB/T 27700.1-2023
|
Surface acoustic wave(SAW) filters of assessed quality - Part 1: Generic specification
|
|
GB/T 43023-2023
|
Guidelines for the measurement method of nonlinearity for surface acoustic wave(SAW) and bulk acoustic wave(BAW) devices in radio frequency(RF)
|
|
GB/T 43024.2-2023
|
Measurement techniques of piezoelectric, dielectric and electrostatic oscillators - Part 2: Phase jitter measurement method
|
|
GB/T 43186.1-2023
|
Surface acoustic wave (SAW) and bulk acoustic wave(BAW) duplexers of assessed quality - Part 1: Generic specification
|
|
GB/T 43186.2-2023
|
Surface acoustic wave (SAW) and bulk acoustic wave (BAW) duplexers of assessed quality - Part 2: Guidelines for the use
|
|
GB/T 8553-2023
|
Generic specification for enclosures for crystal units
|
|
GB/T 12274.4-2021
|
Quartz crystal controlled oscillators of assessed quality - Part 4: Sectional specification - Capability approval
|
|
GB/T 22319.11-2018
|
Measurement of quartz crystal unit parameters -- Part 11: Standard method for the determination of the load resonance frequency fL and the effective load capacitance C Leff using automatic network analyzer techniques and error correction
|
|
GB/T 22319.9-2018
|
Measurement of quartz crystal unit parameters -- Part 9: Measurement of spurious resonances of piezoelectric crystal units
|
|
GB/T 12273.1-2017
|
Quartz crystal units of assessed quality -- Part 1: Generic specification
|
|
GB/T 32988-2016
|
Synthetic quartz crystal wafer for optical low pass filter (OLPF)
|
|
GB/T 15156-2015
|
Generic specification for piezoelectric ceramic transducing elements
|
|
GB/T 22319.7-2015
|
Measurement of quartz crystal unit parameters -- Part 7: Measurement of activity dips of quartz crystal units
|
|
GB/T 30118-2013
|
Single crystal wafers for surface acoustic wave (SAW) device applications -- Specifications and measuring methods
|
|
GB/T 11297.12-2012
|
Test method for extinction ratio of optical crystal
|
|
GB/T 12273.501-2012
|
Quartz crystal units -- A specification in the quality assessment system for electronic components -- Part 5.1: Blank detail specification -- Qualification approval
|
|
GB/T 12274.1-2012
|
Quartz crystal controlled oscillators of assessed quality -- Part 1: Generic specification
|
|
GB/T 12859.1-2012
|
Piezoelectric ceramic resonators -- A specification in the IEC quality assessment System for electronic components (IECQ) -- Part 1: Generic specification -- Qualification approval
|
|
GB/T 12859.201-2012
|
Piezoelectric ceramic resonators -- A specification in the quality assessment System for electronic components (IECQ) -- Part 2-1: Blank detail specification -- Assessment level E
|
|
GB/T 12859.2-2012
|
Piezoelectric ceramic resonators -- A specification in the IEC quality assessment System for electronic components (IECQ) -- Part 2: Sectional specification -- Qualification approval
|
|
GB/T 3352-2012
|
Synthetic quartz crystal -- Specifications and guide to the use
|
|
GB/T 9532-2012
|
Designations for piezoelectric crystals
|
|
GB/T 27700.1-2011
|
Surface acoustic wave (SAW) filters of assessed quality -- Part 1: Generic specification
|
|
GB/T 27700.2-2011
|
Surface acoustic wave (SAW) filters of assessed quality -- Part 2: Guidance on use
|
|
GB/T 22317.1-2008
|
Piezoelectric filters of assessed quality -- Part 1: Generic specification
|
|
GB/T 22318.1-2008
|
Surface acoustic wave (SAW) resonators -- Part 1-1: General information and standard values
|
|
GB/T 22318.2-2008
|
Surface acoustic wave (SAW) resonators -- Part 1-2: Test conditions
|
|
GB/T 22319.8-2008
|
Measurement of quartz crystal unit parameters -- Part 8: Test fixture for surface mounted quartz crystal units
|
|
GB/T 3389.6-1997
|
Test methods for properties of piezoelectric ceramics. Thickness-shear vibration mode for rectangular plate
|
|
GB/T 12273-1996
|
Quartz crystal units. A specification in the quality assessment system for electronic components. Part 1: Generic specification
|
|
GB/T 16516-1996
|
Quartz crystal units. A specification in the quality assessment system for electronic components. Part 2: Sectional specification. Capability approval
|
|
GB/T 16517-1996
|
Quartz crystal units. A specification in the quality assessment system for electronic components. Part 3: Sectional specification. Qualification approval
|
|
GB/T 15020-1994
|
Quartz crystal units for use in electronic equipment. Bland detail specification for. Resistance welded quartz crystal units. Assessment level E
|
|
GB/T 15156-1994
|
Generic specification for piezoelectric ceramic transducing elements
|
|
GB/T 14843-1993
|
Lithium niobate single crystals
|
|
GB/T 12859-1991
|
Generic specification for piezoelectric ceramic resonators for use in electronic equipment
|
|
GB/T 12860-1991
|
Piezoelectric ceramic resonators for use in electronic equipment--Sectional specification for piezoelectric ceramic resonators for low frequency
|
|
GB/T 12861-1991
|
Piezoelectric ceramic resonators for use in electronic equipment--Blank detail specification for piezoelectric ceramic resonators for low frequency--Assessment level E
|
|
GB/T 12862-1991
|
Piezoelectric ceramic resonators for use in electronic equipment--Sectional specification for piezoeletric ceramic resonators for high frequency
|
|
GB/T 12863-1991
|
Piezoelectric ceramic resonators for use in electronic equipment--Blank detail specification for piezoelectric ceramic resonators for high frequency--Assessment level E
|
|
GB/T 12274-1990
|
Quartz crystal controlled oscillators--Generic specification for
|
|
GB/T 12275-1990
|
The rule of type designation for quarz crystal oscillators
|
|
GB/T 9532-1988
|
Designations for LiNbO3, LiTaO3, Bi12GeO20, Bi12SiO20 piezoelectric crystals
|
|
GB/T 8553-1987
|
Holders (Enclosures), crystal, General specification for
|
|
GB/T 6429-1986
|
The rule of type designation for quartz crystal units
|
|
GB/T 6430-1986
|
The rule of type designation for crystal holders (enclosures)
|
|
GB/T 6627-1986
|
Designation for lumbered synthetic quartz crystal
|
|
GB/T 43795-2024
|
Test method for the mechanical strength of cores made of magnetic oxides
|
|
GB/T 43870.1-2024
|
Measurement methods for Curie temperature of magnetic materials - Part 1: Permanent magnetic materials
|
|
GB/T 43870.2-2024
|
Measurement methods for Curie temperature of magnetic materials - Part 2: Soft magnetic materials
|
|
GB/T 44058-2024
|
Marking on ferrite cores
|
|
GB/T 44069.4-2024
|
Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 4: RM-cores
|
|
GB/T 21219-2023
|
Magnetic materials - Classification
|
|
GB/T 28869.2-2023
|
Cores made of soft magnetic materials - Measuring methods - Part 2: Magnetic properties at low excitation level
|
|
GB/T 28869.3-2023
|
Cores made of soft magnetic materials - Measuring methods - Part 3: Magnetic properties at high excitation level
|
|
GB/T 43593-2023
|
Ferrite cores - Standard inductance factor for gapped cores and its tolerance
|
|
GB/T 40675.1-2021
|
Noise suppression sheet for digital devices and equipment - Part 1: Definitions and general properties
|
|
GB/T 40675.2-2021
|
Noise suppression sheet for digital devices and equipment - Part 2: Measuring methods
|
|
GB/T 40675.3-2021
|
Noise suppression sheet for digital devices and equipment - Part 3: Characterization of parameters of noise suppression sheet
|
|
GB/T 36103.1-2018
|
Ferrite cores -- Dimensions -- Part 1: General specification
|
|
GB/T 36103.14-2018
|
Ferrite cores -- Dimensions -- Part 14: EFD-cores for use in power supply applications
|
|
GB/T 36103.7-2018
|
Ferrite cores -- Dimensions -- Part 7: EER-cores
|
|
GB/T 9634.8-2018
|
Ferrite cores -- Guideline on the limits of surface irregularities -- Part 8: PQ-cores
|
|
GB/T 11436-2012
|
Chemical analysis methods for products and semi-finished products made of soft ferrite materials
|
|
GB/T 12796.1-2012
|
Permanent ferrite magnets -- Part 1: Generic specification
|