|
Std ID |
Description (Standard Title) |
Detail |
|
GB/T 31249-2014
|
Environmentally conscious design for electrical and electronic products -- Materials selection
|
GB/T 31249-2014
|
|
GB/T 31250-2014
|
General requirements on environmental information of electrical and electronic products
|
GB/T 31250-2014
|
|
GB/T 5169.38-2014
|
Fire hazard testing for electric and electronic products -- Part 38: Toxicity of fire effluent -- Summary and relevance of test methods
|
GB/T 5169.38-2014
|
|
GB/T 17564.2-2013
|
Standard data element types with associated classification scheme for electric components -- Part 2: EXPRESS dictionary schema
|
GB/T 17564.2-2013
|
|
GB/T 23371.1-2013
|
Basic principles for graphical symbols for use on electrical equipment -- Part 1: Creation of graphical symbols for registration
|
GB/T 23371.1-2013
|
|
GB/T 2423.19-2013
|
Environmental testing - Part 2: Test methods - Test Kc: Sulphur dioxide test for contacts and connections
|
GB/T 2423.19-2013
|
|
GB/T 2423.23-2013
|
Environmental testing - Part 2: Test methods - Test Q: Sealing
|
GB/T 2423.23-2013
|
|
GB/T 2423.24-2013
|
Environmental testing - Part 2: Test methods - Test Sa: Simulated solar radiation at ground level and guidance for solar radiation testing
|
GB/T 2423.24-2013
|
|
GB/T 2423.30-2013
|
Environmental testing - Part 2: Test methods - Test XA and guidance: Immersion in cleaning solvents
|
GB/T 2423.30-2013
|
|
GB/T 2423.40-2013
|
Environmental testing - Part 2: Test methods - Test Cx: Damp heat, steady state (unsaturated pressurized vapour)
|
GB/T 2423.40-2013
|
|
GB/T 2423.41-2013
|
Environmental testing - Part 2: Test methods - Wind pressure
|
GB/T 2423.41-2013
|
|
GB/T 2424.11-2013
|
Environmental testing -- Part 2: Test methods -- Guidance to test Kc: Sulphur dioxide test for contacts and connections
|
GB/T 2424.11-2013
|
|
GB/T 2424.27-2013
|
Environmental testing -- Supporting documentation and guidance -- Calculation of uncertainty of conditions in climatic test chambers
|
GB/T 2424.27-2013
|
|
GB/T 2900.10-2013
|
Electrotechnical terminology -- Electric cables
|
GB/T 2900.10-2013
|
|
GB/T 2900.5-2013
|
Electrotechnical terminology -- Electrical insulating solids, liquids and gases
|
GB/T 2900.5-2013
|
|
GB/T 2900.64-2013
|
Electrotechnical terminology -- Time relays
|
GB/T 2900.64-2013
|
|
GB/T 29782-2013
|
Environmentally conscious design guide for electrical cables and wires
|
GB/T 29782-2013
|
|
GB/T 30137-2013
|
Power quality -- Voltage dips and short interruptions
|
GB/T 30137-2013
|
|
GB/T 30139-2013
|
General specification for industrial electromagnetic shielding fabric
|
GB/T 30139-2013
|
|
GB/T 30426-2013
|
Secondary cells and batteries containing alkaline or other non-acid electrolytes -- Secondary lithium cells and batteries for portable applications
|
GB/T 30426-2013
|
|
GB/T 5169.12-2013
|
Fire hazard testing for electric and electronic products -- Part 12: Glowing/hot-wire based test methods -- Glow-wire flammability index (GWFI) test method for materials
|
GB/T 5169.12-2013
|
|
GB/T 5169.13-2013
|
Fire hazard testing for electric and electronic product -- Part 13: Glowing/hot-wire based test methods -- Glow-wire ignition temperature (GWIT) test method for materials
|
GB/T 5169.13-2013
|
|
GB/T 5169.18-2013
|
Fire hazard testing for electric and electronic products -- Part 18: Toxicity of fire effluent -- General guidance
|
GB/T 5169.18-2013
|
|
GB/T 5169.20-2013
|
Fire hazard testing for electric and electronic products -- Part 20: Surface spread of flame -- Summary and relevance of test methods
|
GB/T 5169.20-2013
|
|
GB/T 5169.2-2013
|
Fire hazard testing for electric and electronic products -- Part 2: Guidance for assessing the fire hazard -- General guidelines
|
GB/T 5169.2-2013
|
|
GB/T 5169.44-2013
|
Fire hazard testing for electric and electronic products -- Part 44: Guidance for assessing the fire hazard -- Fire hazard assessment
|
GB/T 5169.44-2013
|
|
GB/T 5169.9-2013
|
Fire hazard testing for electric and electronic products -- Part 9: Guidance for assessing the fire hazard -- Preselection testing procedures -- General guidelines
|
GB/T 5169.9-2013
|
|
GB/T 2423.18-2012
|
Environmental testing - Part 2: Test methods - Test Kb: Salt mist, cyclic (sodium chloride solution)
|
GB/T 2423.18-2012
|
|
GB/T 2423.22-2012
|
Environmental testing - Part 2: Test methods - Test N: Change of temperature
|
GB/T 2423.22-2012
|
|
GB/T 2423.34-2012
|
Environmental testing - Part 2: Test methods - Test Z/AD: Composite temperature / humidity cyclic test
|
GB/T 2423.34-2012
|
|
GB/T 2423.45-2012
|
Environmental testing - Part 2: Test methods - Test Z/ABDM: Climatic sequence
|
GB/T 2423.45-2012
|
|
GB/T 2423.50-2012
|
Environmental testing - Part 2: Test methods - Test Cy: Damp heat, steady state, accelerated test primarily intended for components
|
GB/T 2423.50-2012
|
|
GB/T 2423.51-2012
|
Environmental testing - Part 2: Test methods - Test Ke: Flowing mixed gas corrosion test
|
GB/T 2423.51-2012
|
|
GB/T 2424.10-2012
|
Environmental testing -- General guidance of accelerated testing for atmospheric corrosion
|
GB/T 2424.10-2012
|
|
GB/T 29309-2012
|
Accelerated stress testing procedures for electric and electronic products -- Guidance for highly accelerated life test
|
GB/T 29309-2012
|
|
GB/T 29600-2012
|
Technical specification of the temperature and humidity control system for the mobile laboratory
|
GB/T 29600-2012
|
|
GB/T 10593.2-2012
|
Method of the measuring environmental parameters for electric and electronic products -- Part 2: Salt mist
|
GB/T 10593.2-2012
|
|
GB/T 9414.2-2012
|
Maintainability of equipment -- Part 2: Maintainability requirements and studies during the design and development phase
|
GB/T 9414.2-2012
|
|
GB/T 9414.3-2012
|
Maintainability of equipment -- Part 3: Verification and collection, analysis and presentation of data
|
GB/T 9414.3-2012
|
|
GB/T 17564.1-2011
|
Standard data element types with associated classification scheme for electric items -- Part 1: Definitions -- Principles and methods
|
GB/T 17564.1-2011
|
|
GB/T 26667-2011
|
Terminology for electromagnetic shielding materials
|
GB/T 26667-2011
|
|
GB/T 26669-2011
|
Environmentally conscious design for electrical and electronic products -- Glossary
|
GB/T 26669-2011
|
|
GB/T 26670-2011
|
Guide of eco-design for medium and small size electric motors
|
GB/T 26670-2011
|
|
GB/T 26671-2011
|
Guide for environmentally conscious design assessment of electrical and electronic products
|
GB/T 26671-2011
|
|
GB/T 26852-2011
|
Requirements concerning the interoperability between electromechanical and electrical applications in CAx-systems
|
GB/T 26852-2011
|
|
GB/T 26853.1-2011
|
Classification and designation of documents for plants, systems and equipment -- Part 1: Rules and classification tables
|
GB/T 26853.1-2011
|
|
GB/T 28179-2011
|
Environmentally conscious design for electrical and electronic product -- Identification of environmental aspects
|
GB/T 28179-2011
|
|
GB/T 28180-2011
|
Guide of eco-design for power and distribution transformers
|
GB/T 28180-2011
|
|
GB/T 2900.87-2011
|
Electrotechnical terminology -- Organisation/market of electricity
|
GB/T 2900.87-2011
|
|
GB/T 2900.88-2011
|
Electrotechnical terminology -- Ultrasonic
|
GB/T 2900.88-2011
|
|
GB/T 14597-2010
|
Environmental climatic conditions appearing in different altitudes for electrical products
|
GB/T 14597-2010
|
|
GB/T 24975.1-2010
|
Guide of environmental design for low-voltage apparatus -- Part 1: General rules
|
GB/T 24975.1-2010
|
|
GB/T 24975.2-2010
|
Guide of environmental design for low-voltage apparatus -- Part 2: Disconnectors
|
GB/T 24975.2-2010
|
|
GB/T 24975.3-2010
|
Guide of environmental design for low-voltage apparatus -- Part 3: Circuit breakers
|
GB/T 24975.3-2010
|
|
GB/T 24975.4-2010
|
Guide of environmental design for low-voltage apparatus -- Part 4: Contact
|
GB/T 24975.4-2010
|
|
GB/T 24975.5-2010
|
Guide of environmental design for low-voltage apparatus -- Part 5: Fuse
|
GB/T 24975.5-2010
|
|
GB/T 24975.6-2010
|
Guide of environmental design for low-voltage apparatus -- Part 6: Button lamp
|
GB/T 24975.6-2010
|
|
GB/T 24975.7-2010
|
Guide of environmental design for low-voltage apparatus -- Part 7: Terminal blocks
|
GB/T 24975.7-2010
|
|
GB/T 24976.1-2010
|
Guide of environmental design for electrical accessories -- Part 1: General rules
|
GB/T 24976.1-2010
|
|
GB/T 24976.2-2010
|
Guide of environmental design for electrical accessories -- Part 2: Cable conduiting system and cable trunking and ducting system for cable management
|
GB/T 24976.2-2010
|
|
GB/T 24976.3-2010
|
Guide of environmental design for electrical accessories -- Part 3: Cable reels for household application and similar purposes
|
GB/T 24976.3-2010
|
|
GB/T 24976.4-2010
|
Guide of environmental design for electrical accessories -- Part 4: Plugs, socket-outlets and couplers for industrial purposes
|
GB/T 24976.4-2010
|
|
GB/T 24976.5-2010
|
Guide of environmental design for electrical accessories -- Part 5: Plugs and socket-outlets for household and similar purposes
|
GB/T 24976.5-2010
|
|
GB/T 24976.6-2010
|
Guide of environmental design for electrical accessories -- Part 6: Appliance couplers for household and similar purpose
|
GB/T 24976.6-2010
|
|
GB/T 24976.7-2010
|
Guide of environmental design for electrical accessories -- Part 7: Connecting devices for low-voltage circuits for household and similar purposes
|
GB/T 24976.7-2010
|
|
GB/T 24976.8-2010
|
Guide of environmental design for electrical accessories -- Part 8: Switches for household and similar fixed electrical installations
|
GB/T 24976.8-2010
|
|
GB/T 13534-2009
|
[Including 2024XG1] Code for designation of colours
|
GB/T 13534-2009
|
|
GB/T 16901.3-2009
|
Classification of connect notes, networks and their encoding
|
GB/T 16901.3-2009
|
|
GB/T 17564.4-2009
|
Standard data element types with associated classification scheme for electric components -- Part 4: IEC reference collection of standard data element types and component classes
|
GB/T 17564.4-2009
|
|
GB/T 23371.2-2009
|
Basic principles for graphical symbols for use on electrical equipment -- Part 2: Form and use of arrows
|
GB/T 23371.2-2009
|
|
GB/T 23371.3-2009
|
Basic principles for graphical symbols for use on electrical equipment -- Part 3: Guidelines for the application of graphical symbols
|
GB/T 23371.3-2009
|
|
GB/T 23686-2009
|
Environmentally conscious design guide for electrical and electronic products
|
GB/T 23686-2009
|
|
GB/T 23687-2009
|
Guide of environmentally conscious design for ICT and CE products
|
GB/T 23687-2009
|
|
GB/T 23688-2009
|
Guide of eco-design for energy-using products
|
GB/T 23688-2009
|
|
GB/T 23689-2009
|
Guide of environmentally conscious declaration for ICT and CE products
|
GB/T 23689-2009
|
|
GB/T 23690-2009
|
Procedure for declaration of materials in products of the electrotechnical and electronic industry
|
GB/T 23690-2009
|
|
GB/T 24337-2009
|
Power quality -- Inter-harmonics in public supply network
|
GB/T 24337-2009
|
|
GB/T 2900.17-2009
|
Electrotechnical terminology -- Measuring relays
|
GB/T 2900.17-2009
|
|
GB/T 2900.8-2009
|
Electrotechnical terminology -- Insulators
|
GB/T 2900.8-2009
|
|
GB/T 2900.84-2009
|
Electrotechnical terminology -- Tariffs for electricity
|
GB/T 2900.84-2009
|
|
GB/T 2900.85-2009
|
Electrotechnical terminology -- Mathematics -- General concepts and linear algebra
|
GB/T 2900.85-2009
|
|
GB/T 2900.86-2009
|
Electrotechnical terminology -- Acoustics and electroacoustics
|
GB/T 2900.86-2009
|
|
GB/T 5170.14-2009
|
Inspection methods for basic parameters of environmental testing equipment -- Electrodynamic vibrating type machines for vibration (sinusoidal) test
|
GB/T 5170.14-2009
|
|
GB/T 5465.1-2009
|
Graphical symbols for use on electrical equipment -- Part 1: Overview and classification
|
GB/T 5465.1-2009
|
|
GB/T 15543-2008
|
Power quality -- Three-phase voltage unbalance
|
GB/T 15543-2008
|
|
GB/T 2423.10-2008
|
Environmental testing - Part 2: Test methods - Test Fc: Vibration (sinusoidal)
|
GB/T 2423.10-2008
|
|
GB/T 2423.1-2008
|
Environmental testing for electric and electronic products - Part 2: Test methods - Tests A: Cold
|
GB/T 2423.1-2008
|
|
GB/T 2423.17-2008
|
Environmental testing for electric and electronic products - Part 2: Test method - Test Ka: Salt mist
|
GB/T 2423.17-2008
|
|
GB/T 2423.2-2008
|
Environmental testing for electric and electronic products - Part 2: Test methods - Tests B: Dry heat
|
GB/T 2423.2-2008
|
|
GB/T 2423.4-2008
|
Environmental testing for electric and electronic products - Part 2: Test method - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
|
GB/T 2423.4-2008
|
|
GB/T 2423.43-2008
|
Environmental testing for electric and electronic products - Part 2: Test methods - Mounting of specimens for vibration, impact and similar dynamic tests
|
GB/T 2423.43-2008
|
|
GB/T 5169.5-2008
|
Fire hazard testing for electric and electronic products -- Part 5: Test flames -- Needle test method -- Apparatus, confirmatory arrangement and guidance
|
GB/T 5169.5-2008
|
|
GB/T 12325-2008
|
Power quality - Deviation of supply voltage
|
GB/T 12325-2008
|
|
GB/T 18135-2008
|
Electrotechnical engineering drawings rules of CAD
|
GB/T 18135-2008
|
|
GB/T 20643.2-2008
|
Specific environment condition -- Environmental test methods -- Part 2: Artificial environment test method and guidance -- Electric and electronic products (including communication products)
|
GB/T 20643.2-2008
|
|
GB/T 2423.101-2008
|
Environmental testing for electric and electronic products - Part 2: Test methods - Test: inclinations and swings
|
GB/T 2423.101-2008
|
|
GB/T 2423.102-2008
|
Environmental testing for electric and electronic products - Part 2: Test methods - Test: Combined temperature (cold and heat) / low air pressure / vibration (sinusoidal)
|
GB/T 2423.102-2008
|
|
GB/T 2423.15-2008
|
Environmental testing for electric and electronic products - Part 2: Test methods - Test Ga and guidance: Acceleration, steady
|
GB/T 2423.15-2008
|
|
GB/T 2423.16-2008
|
Environmental testing - Part 2: Test methods - Test J and guidance: Mold growth
|
GB/T 2423.16-2008
|
|
GB/T 2423.21-2008
|
Environmental testing - Part 2: Test methods - Test M: Low air pressure
|
GB/T 2423.21-2008
|