|
Std ID |
Description (Standard Title) |
Detail |
|
GB/T 30057-2013
|
Code of contracts for international freight forwarders
|
GB/T 30057-2013
|
|
GB/T 30058-2013
|
Rules for record filling and enquiry of international multimodal transportation documents
|
GB/T 30058-2013
|
|
GB/T 30059-2013
|
Seamless corrosion-resisting alloy tubes for heat-exchanger
|
GB/T 30059-2013
|
|
GB/T 30060-2013
|
Steel plates for line pipe fitting of petroleum and natural gas
|
GB/T 30060-2013
|
|
GB/T 30061-2013
|
Ferromanganese-silicon nitride
|
GB/T 30061-2013
|
|
GB/T 3006-1982
|
Test method for shot content of ordinary alumino-silicate refractory fiber felts
|
GB/T 3006-1982
|
|
GB/T 30062-2013
|
Terminology of steel pipes and tubes
|
GB/T 30062-2013
|
|
GB/T 30063-2013
|
Longitudinal submerged arc welded steel tubes for structural purpose
|
GB/T 30063-2013
|
|
GB/T 30064-2013
|
Metallic materials -- Method of constraint loss correction of CTOD fracture toughness for fracture assessment of steel components
|
GB/T 30064-2013
|
|
GB/T 30065-2013
|
Welded ferritic stainless steel tubes for feedwater heater
|
GB/T 30065-2013
|
|
GB/T 30066-2013
|
Welded ferritic stainless steel tubes for heat-exchanger and condenser
|
GB/T 30066-2013
|
|
GB/T 30067-2013
|
Standard terminology relating to metallography
|
GB/T 30067-2013
|
|
GB/T 30068-2013
|
Cold rolled steel sheets and strips for appliance
|
GB/T 30068-2013
|
|
GB/T 30069.1-2013
|
Metallic materials -- Tensile testing at high strain rates -- Part 1: Elastic-bar-type systems
|
GB/T 30069.1-2013
|
|
GB/T 30069.2-2016
|
Metallic materials -- Tensile testing at high strain rates -- Part 2: Servo-hydraulic and other test systems
|
GB/T 30069.2-2016
|
|
GB/T 30070-2013
|
Seamless alloy steel pipes for seawater service
|
GB/T 30070-2013
|
|
GB/T 30071-2013
|
High-density and fine-particle special graphite product
|
GB/T 30071-2013
|
|
GB/T 3007-1982
|
Test method for moisture content of ordinary alumino-silicate refractory fiber felts
|
GB/T 3007-1982
|
|
GB/T 10471-2008
|
Quick frozen fruits and vegetables -- Determination of net weight
|
GB/T 10471-2008
|
|
GB/T 30072-2013
|
Ferronickel -- Determination of nickel content -- EDTA titrimetric method
|
GB/T 30072-2013
|
|
GB/T 30073-2013
|
Seamless austenitic stainless steel tubes for heat exchangers in nuclear power plant
|
GB/T 30073-2013
|
|
GB/T 30074-2013
|
Method of measurement of hydrogen permeation and determination of hydrogen uptake and transport in metals by an electrochemical technique
|
GB/T 30074-2013
|
|
GB/T 30075-2013
|
Rare earth activated nitride red phosphors for LED
|
GB/T 30075-2013
|
|
GB/T 30076-2013
|
Silicate phosphors activated by rare earth for LED
|
GB/T 30076-2013
|
|
GB/T 30081-2013
|
Safe-production specification for reverberatory refining
|
GB/T 30081-2013
|
|
GB/T 3008-1982
|
Rule for preparing samples of ordinary alumino-silicate refractory fiber felts
|
GB/T 3008-1982
|
|
GB/T 30082-2013
|
Copper, lead and zinc sulfide concentrates -- Determination of mass of contained metal in a lot
|
GB/T 30082-2013
|
|
GB/T 30083-2013
|
Copper, lead and zinc ores and concentrates -- Precision and bias of mass measurement techniques
|
GB/T 30083-2013
|
|
GB/T 30084-2013
|
Portable fuel cell power system -- Safety
|
GB/T 30084-2013
|
|
GB/T 30085-2013
|
Industrial systems, installations and equipment and industrial products -- Labelling of cables and cores
|
GB/T 30085-2013
|
|
GB/T 30086-2013
|
Determination of axial coefficient of linear expansion of plastics pipes for water supply
|
GB/T 30086-2013
|
|
GB/T 30087-2013
|
Determination of phenylbutazone in cosmetics by high performance liquid chromatography method
|
GB/T 30087-2013
|
|
GB/T 30088-2013
|
Determination of methyl eugenol in cosmetics by gas chromatography/mass spectrometry method
|
GB/T 30088-2013
|
|
GB/T 30089-2013
|
Determination chlorpropamide, carbutamide and tolbutamide in cosmetics by LC-MS/MS method
|
GB/T 30089-2013
|
|
GB/T 30090-2013
|
Standard guide for temperature electromotive force (emf) tables for non-letter designated thermocouple combinations
|
GB/T 30090-2013
|
|
GB/T 30091-2013
|
Specifications for membrane key board
|
GB/T 30091-2013
|
|
GB/T 3009-1982
|
Ships-corrosion-resistant plugs
|
GB/T 3009-1982
|
|
GB/T 30092-2013
|
Metal bellows compensator used in high voltage combined electrical appliance
|
GB/T 30092-2013
|
|
GB/T 30093-2013
|
Reliability technique review procedure for automation control system
|
GB/T 30093-2013
|
|
GB/T 30094-2013
|
Technical specification for industrial Ethernet switch
|
GB/T 30094-2013
|
|
GB/T 30095-2013
|
Networked manufacturing environment business interoperability protocol and model
|
GB/T 30095-2013
|
|
GB/T 30096-2013
|
Major letter symbols for laboratory instrument and equipment
|
GB/T 30096-2013
|
|
GB/T 30097-2013
|
Thermal analyzer for molten cast iron
|
GB/T 30097-2013
|
|
GB/T 30098-2013
|
Laboratory magnetic driven autoclave
|
GB/T 30098-2013
|
|
GB/T 30099-2013
|
General specifications for laboratory centrifuge
|
GB/T 30099-2013
|
|
GB/T 30100-2013
|
Test methods for building wallboard
|
GB/T 30100-2013
|
|
GB/T 30101-2013
|
Polyvinyl alcohol water-soluble staple fiber
|
GB/T 30101-2013
|
|
GB/T 30102-2013
|
Plastics -- Guidelines for the recovery and recycling of plastic waste
|
GB/T 30102-2013
|
|
GB/T 30103.1-2013
|
Methods of testing for thermal performance on cold store -- Part 1: Temperature and humidity testing
|
GB/T 30103.1-2013
|
|
GB/T 30103.2-2013
|
Methods of testing for thermal performance on cold store -- Part 2: Air velocity testing
|
GB/T 30103.2-2013
|
|
GB/T 30103.3-2013
|
Methods of testing for thermal performance on cold store -- Part 3: Heat flux testing for envelop enclosure
|
GB/T 30103.3-2013
|
|
GB/T 30104.101-2013
|
Digital addressable lighting interface -- Part 101: General requirements -- System
|
GB/T 30104.101-2013
|
|
GB/T 30104.102-2013
|
Digital addressable lighting interface -- Part 102: General requirements -- Control gear
|
GB/T 30104.102-2013
|
|
GB/T 30104.201-2013
|
Digital addressable lighting interface -- Part 201: Particular requirements for control gear -- Fluorescent lamps (device type 0)
|
GB/T 30104.201-2013
|
|
GB/T 30104.202-2013
|
Digital addressable lighting interface -- Part 202: Particular requirements for control gear -- Self-contained emergency lighting (device type 1)
|
GB/T 30104.202-2013
|
|
GB/T 30104.203-2013
|
Digital addressable lighting interface -- Part 203: Particular requirements for control gear -- Discharge lamps (excluding fluorescent lamps) (device type 2)
|
GB/T 30104.203-2013
|
|
GB/T 30104.204-2013
|
Digital addressable lighting interface -- Part 204: Particular requirements for control gear -- Low voltage halogen lamps (device type 3)
|
GB/T 30104.204-2013
|
|
GB/T 30104.205-2013
|
Digital addressable lighting interface -- Part 205: Particular requirements for control gear -- Supply voltage controller for incandescent lamps (device type 4)
|
GB/T 30104.205-2013
|
|
GB/T 30104.206-2013
|
Digital addressable lighting interface -- Part 206: Particular requirements for control gear -- Conversion from digital signal into d.c. voltage (device type 5)
|
GB/T 30104.206-2013
|
|
GB/T 30104.207-2013
|
Digital addressable lighting interface -- Part 207: Particular requirements for control gear -- LED modules (device type 6)
|
GB/T 30104.207-2013
|
|
GB/T 30104.208-2013
|
Digital addressable lighting interface -- Part 208: Particular requirements for control gear -- Switching function (device type 7)
|
GB/T 30104.208-2013
|
|
GB/T 30104.209-2013
|
Digital addressable lighting interface -- Part 209: Particular requirements for control gear -- Colour control (device type 8)
|
GB/T 30104.209-2013
|
|
GB/T 30104.210-2013
|
Digital addressable lighting interface -- Part 210: Particular requirements for control gears -- Sequencer (Device Type 9)
|
GB/T 30104.210-2013
|
|
GB/T 30105-2013
|
Supermassive continuous rail static weighing device without foundation
|
GB/T 30105-2013
|
|
GB/T 30106-2013
|
Horology -- Water-resistant watches
|
GB/T 30106-2013
|
|
GB/T 30107-2013
|
Health informatics -- HL7 Version 3 -- Reference information model
|
GB/T 30107-2013
|
|
GB/T 30108-2013
|
Information and documentation -- Requirements for binding of books, periodicals, serials and other paper documents for archive and library use -- Methods and materials
|
GB/T 30108-2013
|
|
GB/T 30109-2013
|
AC loss measurements -- Total AC loss measurement of round superconducting wires exposed to a transverse alternating magnetic field at liquid helium temperature by a pickup coil method
|
GB/T 30109-2013
|
|
GB/T 30110-2013
|
Measuring methods of parameters of HgCdTe epilayers used for space infrared detectors
|
GB/T 30110-2013
|
|
GB/T 30111-2013
|
General specification for star sensor
|
GB/T 30111-2013
|
|
GB/T 30112-2013
|
The lunar coordinate system
|
GB/T 30112-2013
|
|
GB/T 30113.1-2013
|
Optical measurement methods on flow field in microgravity fluid physics -- Part 1: Shadowgraph and Schlieren
|
GB/T 30113.1-2013
|
|
GB/T 30114.1-2013
|
Terminology for space science and application -- Part 1: General
|
GB/T 30114.1-2013
|
|
GB/T 30114.2-2014
|
Terminology for space science and application -- Part 2: Space physics
|
GB/T 30114.2-2014
|
|
GB/T 30114.3-2014
|
Terminology for space science and application -- Part 3: Space astronomy
|
GB/T 30114.3-2014
|
|
GB/T 30114.4-2014
|
Terminology for space science and application -- Part 4: Lunar and planetary science
|
GB/T 30114.4-2014
|
|
GB/T 30114.5-2014
|
Terminology for space science and application -- Part 5: Space life science and biotechnology
|
GB/T 30114.5-2014
|
|
GB/T 30114.6-2014
|
Terminology for space science and application -- Part 6: Space medicine
|
GB/T 30114.6-2014
|
|
GB/T 30114.7-2014
|
Terminology for space and application -- Part 7: Microgravity science
|
GB/T 30114.7-2014
|
|
GB/T 30115-2013
|
Specifications for vegetation index production from satellite remote sensing imagery
|
GB/T 30115-2013
|
|
GB/T 30116-2013
|
Requirements for semiconductor manufacturing facility electromagnetic compatibility
|
GB/T 30116-2013
|
|
GB/T 30117.2-2013
|
Photobiological safety of lamps and lamp systems -- Part 2: Guidance on manufacturing requirements relating to non-laser optical radiation safety
|
GB/T 30117.2-2013
|
|
GB/T 30118-2013
|
Single crystal wafers for surface acoustic wave (SAW) device applications -- Specifications and measuring methods
|
GB/T 30118-2013
|
|
GB/T 30119-2013
|
Preparation method of calibration solution for atomic absorption measurement
|
GB/T 30119-2013
|
|
GB/T 301-1995
|
Rolling bearings. Thrust ball bearings. Boundary dimensions
|
GB/T 301-1995
|
|
GB/T 1047-1995
|
Nominal size for pipe components
|
GB/T 1047-1995
|
|
GB/T 30120-2013
|
Temperature -- Electromotive force (EMF) tables for pure-element thermocouple combinations
|
GB/T 30120-2013
|
|
GB/T 30121-2013
|
Industrial platinum resistance thermometers and platinum temperature sensors
|
GB/T 30121-2013
|
|
GB/T 30123-2013
|
Busbar trunking systems (air insulation busbar) for wind power generation
|
GB/T 30123-2013
|
|
GB/T 30124-2013
|
Bamboo-charcoal polyester drawn textured yarn
|
GB/T 30124-2013
|
|
GB/T 30125-2013
|
Bamboo-charcoal polyester staple fiber
|
GB/T 30125-2013
|
|
GB/T 1047-2005
|
Pipework components -- Definition and selection of DN (nominal size)
|
GB/T 1047-2005
|
|
GB/T 30127-2013
|
Textiles - Testing and evaluation for far infrared radiation properties
|
GB/T 30127-2013
|
|
GB/T 30128-2013
|
Textiles -- Testing and evaluation for negative-ion concentration
|
GB/T 30128-2013
|
|
GB/T 30129-2013
|
Base paper of wallpaper
|
GB/T 30129-2013
|
|
GB/T 30130-2013
|
Offset paper
|
GB/T 30130-2013
|
|
GB/T 30131-2013
|
Textile -- Evaluation for electrostatic properties of garment system -- Dressing method
|
GB/T 30131-2013
|
|
GB/T 30132-2013
|
Hectograph books and periodicals paper
|
GB/T 30132-2013
|
|
GB/T 30133-2013
|
The specification of cover stock for sanitary absorbent pads
|
GB/T 30133-2013
|
|
GB/T 30134-2013
|
Cold store management regulation
|
GB/T 30134-2013
|