HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189759 (19 Oct 2025)

GB/T 9414.2-2012 English PDF

US$794.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 9414.2-2012: Maintainability of equipment -- Part 2: Maintainability requirements and studies during the design and development phase
Status: Valid

GB/T 9414.2: Evolution and historical versions

Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 9414.2-2012English794 Add to Cart 3 days [Need to translate] Maintainability of equipment -- Part 2: Maintainability requirements and studies during the design and development phase Valid GB/T 9414.2-2012
GB/T 9414.2-1988English279 Add to Cart 3 days [Need to translate] Guide on maintainability of equipment--Part 2: Maintainability requirement in specification and contracts Obsolete GB/T 9414.2-1988

PDF similar to GB/T 9414.2-2012


Standard similar to GB/T 9414.2-2012

GB/T 12325   GB/T 5465.2   GB/T 5169.5   GB/T 9414.5   GB/T 9414.9   GB/T 9414.3   

Basic data

Standard ID GB/T 9414.2-2012 (GB/T9414.2-2012)
Description (Translated English) Maintainability of equipment -- Part 2: Maintainability requirements and studies during the design and development phase
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard K04
Classification of International Standard 21.020
Word Count Estimation 40,456
Older Standard (superseded by this standard) GB/T 9414.2-1988; GB/T 9414.4-1988
Quoted Standard IEC 60050-191-1990; IEC 60300-3-1; IEC 60300-3-10-2001; IEC 60300-3-11; IEC 60300-3-12; IEC 60300-3-14; IEC 60706-3; IEC 60706-5; IEC 60812; IEC 61025; IEC 61160; IEC 61649; IEC 60300-3-3
Adopted Standard IEC 60706-2-2006, IDT
Regulation (derived from) National Standards Bulletin No. 41 of 2012
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary This standard specifies requirements and associated maintenance and use of the design parameters are discussed to achieve maintainability requirements and the need to make the necessary work and maintenance of these relations program, describes the genera

GB/T 9414.2-2012: Maintainability of equipment -- Part 2: Maintainability requirements and studies during the design and development phase


---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Maintainability of equipment Part 2. Maintainability requirements and studies during the design and development phase ICS 21.020 K04 National Standards of People's Republic of China Replacing GB/T 9414.2-1988, GB/T 9414.4-1988 Maintainability Part 2. Design and development phase Maintainability requirements and studies Maintainabilityofequipment-Part 2. Maintainabilityrequirements (IEC 60706-2.2006, IDT) Issued on. 2012-12-31 2013-06-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Table of Contents

Preface Ⅰ Introduction Ⅱ 1 Scope 1 2 Normative references 1 3 Terms, definitions and abbreviations 2 3.1 Terms and definitions 2 3.2 Abbreviations 2 4 General Method 2 5 Repair Principle 3 6 life cycle maintenance work 3 6.1 General 3 6.2 Concepts and Definitions Phase 3 6.3 design and development phase 4 6.4 manufacture and installation of Phase 5 6.5 Use and maintenance phase 5 6.6 scrap Stage 5 7 maintainability specifications 5 5 7.1 Maintenance requirements 7.2 Maintainability characteristics 6 8 7.3 Constraints 7.4 Maintainability Program Requirements 8 7.5 Verify 8 Maintainability 8 in the design and development stage 9 8.1 General 9 8.2 Objective 9 8.3 Maintenance of the design process research 9 8.4 Analysis tools and analysis 13 9 Maintainability Design guarantee 19 19 9.1 Contact 9.2 Design criteria and maintenance checklist 19 20 9.3 Design Review Appendix A (informative) Maintainability Distribution 21 Annex B (informative) Maintainability Allocation Example 27 Annex C (informative) failure rate is not constant distribution system reliability and maintenance policy selection example 30

Foreword

GB/T 9414 "maintainability" or has plans to release the following sections. --- Part 1. Application guide; --- Part 2. design and development stage of the maintenance requirements and research; --- Part 3. Validation and data collection, analysis and representation; --- Part 4. Service and maintenance of security program guidelines; --- Part 5. diagnostic tests. This section GB/T 29414 Part of. This section drafted in accordance with GB/T 1.1-2009 given rules. This Part replaces GB/T 9414.2-1988 "Guide on maintainability of equipment Part II. specification and contract maintenance requirements" and GB/T 9414.4-1988 "Guide on maintainability of equipment Part V. Research design phase of repair." This portion of the GB/T 9414.2- 1988 and GB/T 9414.4-1988 compared to the main changes are as follows. --- Standard name "Guide on maintainability of equipment" unified to "repair" of; --- Standard structure using IEC 60706-2.2006; --- Additional three chapters. Chapter 4, the general procedure, Chapter 5 Servicing principle, Chapter 6 life cycle maintenance work; --- In other chapters also have relevant content revisions, such as increasing the fault tree analysis (see 8.4.8) and RCM analysis (see 8.4.9); --- Added two appendices. A maintainability allocation Appendices Appendix C failure rate is not constant distribution system reliability and maintenance side Needle selection, for example. This section uses the translation method is equivalent to using IEC 60706-2.2006 "on maintainability of equipment - Part 2. Design and development phase to the maintenance of Seek and research. " Consistency correspondence between this part of international documents and normative references of our files are as follows. --- GB/T 2900.13-2008 Electrotechnical terminology credibility and quality of service (IEC 60050 (191).1990, IDT); --- GB/T 7826-2012 Technical Systems Reliability Analysis Failure Mode and Effects Analysis (FMEA) procedure (IEC 60812. 2006, IDT); --- GB/T 9414.1-2012 Maintenance - Part 1. Application guide (IEC 60300-3-10.2001, IDT); Part --- GB/T 9414.3-2012 3 Maintainability. Maintainability of test data collection, analysis and representation (IEC 60706- 3.2006, IDT); --- GB/T 9414.7-2000 Guide on maintainability of equipment Part 4. Diagnostic tests (idt IEC 60706-5.1994). This part of the National Electrotechnical Standardization Technical Committee Electronic Product Reliability and Maintainability (SAC/TC24) centralized. This section drafted by. Ministry of Information Industry and Posts and Telecommunications Industry Standardization Institute, Beijing University of Posts and Telecommunications. The main drafters of this section. Wu Bingmei, Natsumi round, Zhang Tiankui, Hu Yi-hong, Zeng Zhimin, Guocai Li, Zhu Xinning. This part of the standard replaces the previous editions are. --- GB/T 9414.2-1988; --- GB/T 9414.4-1988.

Introduction

Maintainability refers to the product during use, the availability of repair and maintenance support features. It is necessary to repair and open design of a product The part of the development process to consider, so the maintenance requirements as the initial part of the specification is very important. GB/T 9414 standard is intended to guide designers How can a high level of maintainability to better integrate them into a product, from And makes the maintenance costs can be reduced to an acceptable level. Can be taken to ensure that the necessary maintenance work to make products in a safe environment, And to ensure that the product can be run according to performance requirements is very important. GB/T 9414 This section introduces the concept of the maintenance and repair of how to combine the specification and contracts, and how Maintainability As part of the design process to consider the guidance given. The following section constitutes the credibility of a part of the standard system. GB/T 6992.1 and GB/T 6992.2 standard is the credibility of the top, which is how the credibility (including reliability, availability and maintenance Repairability) combine to provide guidance on product manufacturing. GB/T 9414.1 standard is the top level of maintenance, it is as an application guide GB /part of the task described in T 6992.2, can be used to implement complete, including product design, development and maintenance of the session count Draw. This part also to achieve optimum maintainability, consider how the maintenance task provides guidelines. Maintainability Part 2. Design and development phase Maintainability requirements and studies

1 Scope

This section GB/T 9414 raised maintainability requirements and related design and use parameters are discussed to achieve the maintenance requirements and needs Relationship between the necessary work to be carried out and how they work and maintenance plans, and describes a general method for this purpose as well as in the contract or regulations How to explain the scope of the maintenance of the properties. This section does not give a detailed description of how the maintenance of all the guidelines and how to enter into service contracts of. Only it sets out (to mention only When the maintenance of the properties included in a beginning) product development, how to consider the maintenance requirements. This section details the maintenance study in the preliminary design stage and detailed design stage, as with the other two phases of repair Maintenance and support tasks interlinkages, will be described in the relevant standard. This section also includes maintenance considerations in the design review. This section will help you determine the maintenance product targets and associated maintenance plan.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. IEC 60050 (191).1990 Electrotechnical terminology credibility and quality of service (InternationalElectrotechnicalVocabulary (IEV) -Chapter191. Dependabilityandqualityofservice) IEC 60300-3-1 Dependability management - Part 3-1. Application guide credibility analysis methodological guide (Dependabilitymanagement-Part 3-1. Applicationguide-Guideonmethodology) IEC 60300-3-3 Dependability management - Part 3-3. Application guide life-cycle costing (Dependabilitymanage- ment-Part 3-12. Applicationguide-Lifecyclecosting) IEC 60300-3-10.2001 Dependability management - Part 3-10. Application guide (Dependabilitymanagement-Part 3- 10. Applicationguide-maintainability) IEC 60300-3-11 Dependability management - Part 3-11. Application guide reliability centered maintenance (Dependability management-Part 3-12. Applicationguide-Reliabilitycentredmaintenance) IEC 60300-3-12 Dependability management - Part 3-12. Application guide Integrated Logistics Support (Dependabilitymanage- ment-Part 3-12. Applicationguide-Integratedlogisticsupport) IEC 60300-3-14 Dependability management - Part 3-14. Application guide repair and maintenance support (Dependabilitymanage- ment-Part 3-14. Applicationguide-MaintenanceandMaintenancesupport) IEC 60706-3 Guide on maintainability of equipment - Part 3. Maintenance of test data collection, analysis and presentation of (Guideonma- intainabilityofequipment-Part 3. Verificationandcolection, analysisandpresentationofdata) IEC 60706-5 Guidelines maintainability of equipment - Part 4 diagnostic tests (Guideonmaintainabilityofequipment- Part 5. Diagnostictesting) IEC 60812 system reliability analysis Failure Mode and Effects Analysis (FMEA) program (Analysistechniquesfor systemreliability-Procedureforfailuremodeandeffectsanalysis (FMEA)) IEC 61025 Fault Tree Analysis (FTA) (Faulttreeanalysis (FTA)) IEC 61160 Design Review (Designreview)

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 9414.2-2012_English be delivered?

Answer: Upon your order, we will start to translate GB/T 9414.2-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 9414.2-2012_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 9414.2-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 9414.2-2012?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 9414.2-2012 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.