|
US$194.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 2424.11-2013: Environmental testing -- Part 2: Test methods -- Guidance to test Kc: Sulphur dioxide test for contacts and connections
Status: Valid GB/T 2424.11: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 2424.11-2013 | English | 194 |
Add to Cart
|
3 days [Need to translate]
|
Environmental testing -- Part 2: Test methods -- Guidance to test Kc: Sulphur dioxide test for contacts and connections
| Valid |
GB/T 2424.11-2013
|
| GB/T 2424.11-1982 | English | 199 |
Add to Cart
|
2 days [Need to translate]
|
Basic environmental testing procedures for electric and electronic products--Guidance for sulphur dioxide test for contacts and connections
| Obsolete |
GB/T 2424.11-1982
|
PDF similar to GB/T 2424.11-2013
Basic data | Standard ID | GB/T 2424.11-2013 (GB/T2424.11-2013) | | Description (Translated English) | Environmental testing -- Part 2: Test methods -- Guidance to test Kc: Sulphur dioxide test for contacts and connections | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | K04 | | Classification of International Standard | 19.040 | | Word Count Estimation | 10,133 | | Quoted Standard | GB/T 2423.19-2013 | | Adopted Standard | IEC 60068-2-49-1983; IDT | | Regulation (derived from) | National Standards Bulletin No. 22 of 2013 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard applies to: The design and testing personnel to provide guidance in the application of sulfur dioxide test specification. | GB/T 2424.11-2013: Environmental testing -- Part 2: Test methods -- Guidance to test Kc: Sulphur dioxide test for contacts and connections
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Environmental testing Part 2. Test methods Guidance to test Kc. Sulphur dioxide test for contacts and connections
ICS 19.040
K04
National Standards of People's Republic of China
Environmental testing - Part 2. Test methods Test Kc.
Sulfur dioxide test for contacts and connections of the
Environmentaltesting-Part 2. Testmethods-GuidancetotestKc.
(IEC 60068-2-49. 1983, Basicenvironmentaltestingprocedures-
Part 2. Tests-GuidancetotestKc. Sulphurdioxidetestfor
contactsandconnections, IDT)
Issued on. 2013-11-12
2014-03-07 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Preface Ⅰ
1 Scope 1
2 Normative references 1
3 1 Overview
4 1 of sulfur dioxide in the atmosphere
5 Test 1 Purpose and Application
6 2 test parameters
7 Test severities 3
Way test gas occurs 8 3
4 9 assessment results
10 use of the test and the preparation of specifications Note to 4
Appendix A (informative) sulfur dioxide pollution data 5
Reference 7
Foreword
GB/T 2424 contains the following sections.
--- GB/T 2424.1 electric and electronic products environmental testing high temperature and low temperature tests;
--- GB/T 2424.2 electric and electronic products environmental testing for damp heat tests;
--- GB/T 2424.5 electric and electronic products environmental testing to confirm performance of temperature chambers;
--- GB/T 2424.6 electric and electronic products environmental testing temperature/humidity chamber performance confirmation;
--- GB/T 2424.7 electric and electronic products environmental testing test A and B (with load) measure the temperature of the chamber;
--- GB/T 2424.10 Environmental testing atmospheric corrosion accelerated testing of common guidelines;
--- GB/T 2424.11 Environmental testing - Part 2. sulfur dioxide test for contacts and connections. Tests - Test Kc
Guidelines;
--- GB/T 2424.13 Environmental testing for electric and electronic products Part 2. Test methods for temperature change Test Guidelines;
--- GB/T 2424.14 Environmental testing for electric and electronic products Part 2. Test methods for solar radiation testing;
--- GB/T 2424.15 electric and electronic products environmental testing temperature/low air pressure tests guidelines;
--- GB/T 2424.17 Environmental testing for electric and electronic products soldering Test Guidelines;
--- Environmental Test Guidelines GB/T 2424.19 electric and electronic products environmental testing simulated the effects of storage;
--- GB/T 2424.22 electric and electronic products environmental testing procedures for temperature (cold and heat) and vibration (sinusoidal) tests
Guidelines;
--- GB/T 2424.25 Environmental testing for electric and electronic products - Part 3. Test pilot Seismic test methods;
--- GB/T 2424.26 Environmental testing for electric and electronic products - Part 3. Supporting documentation and guidance vibration test selection;
--- GB/T 2424.27 Environmental testing Supporting documentation and guidance temperature and humidity chamber uncertainty calculation.
This section GB/T 2424 Part 11.
This section drafted in accordance with GB/T 1.1-2009 given rules.
This section uses the translation method identical with IEC 60068-2-49. 1983 (first edition) "Basic environmental testing procedures - Part 2. Test
Test Kc. the point of contact and connections sulfur dioxide test guidelines. "
This part of IEC 60068-2-49. compared to 1983 (first edition), mainly to do the following editorial changes.
Name --- this section read as follows. sulfur dioxide contact points and connections. "Environmental testing - Part 2. Tests - Test Kc
Test Guidelines ";
--- For the/T 2424 standard format is consistent with the new GB , increased Chapter 1, "scope" and Chapter 2, "Normative references" and phase
Other clauses should be adjusted number;
--- According to the national standard guidelines for the preparation made editorial changes;
--- The Chapter 8 Table 1 and Table 2 as an information appendix "sulfur dioxide pollution data" (see Appendix A).
This part of the National Electrical and Electronic Products Environmental conditions and environmental tests for Standardization Technical Committee (SAC/TC8) and focal points.
This section drafted by. China Electric Apparatus Research Institute Co., Ltd. Southern Jiangsu Wuxi Test Equipment Co., Ltd., Ningbo Jiesheng Ocean Development
Co., Ningbo Branch of the IC Design Center Co., Ltd., Ningbo-Run Auto Parts Co. shaft.
The main drafters of this section. dare to expose new, Ni Yiming, thanks Ke Long, Xu Xuedong, Geng Shu.
Environmental testing - Part 2. Test methods Test Kc.
Sulfur dioxide test for contacts and connections of the
1 Scope
This section GB/T 2424 applies to the relevant design and test personnel to provide guidance in the application of sulfur dioxide test specification.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 2423.19-2013 Environmental testing - Part 2. sulfur dioxide test for contacts and connections. Tests - Test Kc
Test (IEC 60068-2-42.2003, IDT)
3 Overview
Contacts and connections during the life expectancy of whether it has good performance depends on many parameters, some of which parameters are set by
Count determined (such as type, material, stress, etc.), the other part is determined by its working environment parameters of the decision. The environmental impact, with particular
Note pollutants contained in the atmosphere (usually very little content). GB/T 2423.19-2013 relates to urban and industrial pollution in the atmosphere is the most important
One was that the sulfur dioxide (SO2).
4 atmospheric sulfur dioxide
Atmospheric corrosion of metals is usually caused by atmospheric moisture and contaminants caused. Products of combustion of fossil fuels is the main pollutant to
One source. These combustion products there are a lot of sulfur dioxide (SO2) corrosive components; also can detect a very low concentration of sulfur trioxide
(SO3), oxides of nitrogen and chlorine.
Appendix A gives the concentration of sulfur dioxide in air of urban and industrial environment, usually in the 1 × 10-9 ~ 100 × 10-9 (volume concentration
Degree), but in some areas the peak can reach 10-6 (volume concentration), or even more.
In humid atmosphere, in addition to precious metals and silver, sulfur dioxide can corrode all other metals, and can significantly affect the provisional type contact
Performance points. In extreme cases, the contact points due to the accumulation of corrosion products prevents metal to metal contact of which was open.
5 Test purpose and application
5.1 Type of contacts and connections
This test is designed for a specific type of contacts and connections (except for welding and brazing), it is necessary to briefly describe these type contact
And the connecting member.
Contacts and connections can be divided into two categories. permanent and temporary type. Both types are the metal surface by an external force combined with each other.
Permanent connection force is very large, often lead to permanent deformation of the metal, and may form a local welding. Such connections are not
Can-off during its lifetime. Permanent connections have inclusion and wrap form.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 2424.11-2013_English be delivered?Answer: Upon your order, we will start to translate GB/T 2424.11-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 2424.11-2013_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 2424.11-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 2424.11-2013?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 2424.11-2013 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|