|
Std ID |
Description (Standard Title) |
Detail |
|
GB/T 11313.36-2006
|
Radio-frequency connectors -- Part 36: Microminiature r.f. coaxial connectors with snap-on coupling -- Characteristic impedance 50 Ohms (Type MCX)
|
GB/T 11313.36-2006
|
|
GB/T 11313.37-2015
|
Radio-frequency connectors -- Part 37: Sectional specification for STWX8 series R.F. coaxial connectors
|
GB/T 11313.37-2015
|
|
GB/T 11313.4-2007
|
Radio-frequency connectors -- Part 4: R.F. coaxial connectors with inner diameter of outer conductor 16mm (0.63 in) with screw lock -- Characteristic impedance 50 ohms (Type 7-16)
|
GB/T 11313.4-2007
|
|
GB/T 11313.8-2015
|
Radio-frequency connectors -- Part 8: Sectional specification for RF coaxial connectors with inner diameter of outer conductor 6.5 mm (0.256 in) with bayonet lock -- Characteristic impedance 50 Ω (75 Ω) (type BNC)
|
GB/T 11313.8-2015
|
|
GB/T 11313.9-2013
|
Radio-frequency connectors -- Part 9: Sectional specification for SMC series R.F. coaxial connectors
|
GB/T 11313.9-2013
|
|
GB/T 11313-1996
|
Redio-frequency connectors--Part 1: Generic specification--General requirements and measuring methods
|
GB/T 11313-1996
|
|
GB/T 11318.10-1996
|
Equipments and components used in cabled distribution systems primarily intended for television and sound signals. Part 10: Generic specifications for splitter and subscriber’s trap
|
GB/T 11318.10-1996
|
|
GB/T 11318.11-1996
|
Equipments and components used in cabled distribution systemsprimarily intended for television and sound signals. Part 11: Generic specifications for attenuator, equalizer, filter and trap
|
GB/T 11318.11-1996
|
|
GB/T 11318.1-1996
|
Equipments and components used in cabled distribution systems primarily intended for television and sound signals. Part 1: Generic specifications
|
GB/T 11318.1-1996
|
|
GB/T 11318.12-1996
|
Equipments and components used in cabled distribution systems primarily intended for television and sound signals. Part 12: Generic specifications for systemoutlets
|
GB/T 11318.12-1996
|
|
GB/T 11318.13-1996
|
Equipments and components used in cabled distribution systems primarily intended for television and sound signals. Part 13: Generic specifications for set top converter
|
GB/T 11318.13-1996
|
|
GB/T 11318.14-1996
|
Equipments and components used in cabled distribution systems primarily intended for television and sound signals. Part 14: Generic specifications for arrester
|
GB/T 11318.14-1996
|
|
GB/T 11318.2-1996
|
Equitpments and components used in cabled distribution systems primarily intended for television and sound signals. Part 2: Generic specifications for pilot signals generator
|
GB/T 11318.2-1996
|
|
GB/T 11318.3-1996
|
Equipments and components used in cabled distribution systems primarily intended for television and sound signals. Part 3: Generic specifications for TV modulator
|
GB/T 11318.3-1996
|
|
GB/T 11318.4-1996
|
Equipments and components used in cabled distribution systems primarily intended for television and sound signals. Part 4: Generic specifications for channel processor
|
GB/T 11318.4-1996
|
|
GB/T 11318.5-1996
|
Equipments and components used in cabled distribution systems primarily intended for television and sound signals. Part 5: Generic specifications for channel converter
|
GB/T 11318.5-1996
|
|
GB/T 11318.6-1996
|
Equipments and components used in cabled distribution systems primarily intended for television and sound signals. Part 6: Generic specifications for combiners
|
GB/T 11318.6-1996
|
|
GB/T 11318.7-1996
|
Equipments and components used in cabled distribution systems primarily intended for television and sound signals. Part 7: Generic specifications for amplifier
|
GB/T 11318.7-1996
|
|
GB/T 11318.8-1996
|
Equipments and components used in cabled distribution systems primarily intended for television and sound signals. Part 8: Generic specifications for trunk amplifiers
|
GB/T 11318.8-1996
|
|
GB/T 11318.9-1996
|
Equipments and components used in cabled distribution systems primarily intended for television and television signals. Part 9: Generic specifications of equipments for power supply
|
GB/T 11318.9-1996
|
|
GB/T 11320-1989
|
Test methods for the properties of piezoelectric ceramics material with the low mechanical quality factor
|
GB/T 11320-1989
|
|
GB/T 11321-1989
|
Guide for choosing modular dimensions for waveguide components
|
GB/T 11321-1989
|
|
GB/T 1132-1984
|
Machine reamers with parallel shanks
|
GB/T 1132-1984
|
|
GB/T 11322.1-1997
|
Radio-frequency cables. Part 0: Guide to the design of detail specifications. Section 1--Goaxial cables
|
GB/T 11322.1-1997
|
|
GB/T 11322.1-2013
|
Radio frequency cables -- Part 0: Guide to the design of detail specifications -- Section 1: Coaxial cables
|
GB/T 11322.1-2013
|
|
GB/T 1132-2004
|
Machine chucking reamers with parallel shanks or Morse taper shanks
|
GB/T 1132-2004
|
|
GB/T 11323-1989
|
General requirements and tests for single-unit coaxial cables for use in cabled distribution systems
|
GB/T 11323-1989
|
|
GB/T 11324-1995
|
Performance and test methods of the fourth order digital multiplex equimpent operating at 139264 kbit/s and using positive justification
|
GB/T 11324-1995
|
|
GB/T 11326.1-1989
|
High frequency rural telecommunication cables with polyolefin insulation and laminated aluminium polyolefin sheath. General
|
GB/T 11326.1-1989
|
|
GB/T 11326.2-1989
|
High frequency rural telecommunication cables with polyolefin insulation and laminated aluminium polyolefin sheath. Unfilled cables with copper conductors
|
GB/T 11326.2-1989
|
|
GB/T 11326.3-1989
|
High frequency rural telecommunication cables with polyolefin insulation and laminated aluminium polyolefin sheath--Unfilled cables with aluminium conductors
|
GB/T 11326.3-1989
|
|
GB/T 11326.4-1989
|
High frequency rural telecommunication cables with polyolefin insulation and laminated aluminium polyolefin sheath. Filled cables with copper conductors
|
GB/T 11326.4-1989
|
|
GB/T 11326.5-1989
|
High frequency rueal telecommunication cables with polyolefin insulation and laminated aluminium polyolefin sheath--Filled cables with aluminium conductors
|
GB/T 11326.5-1989
|
|
GB/T 11326.6-1989
|
High frequency rural telecommunication cables with polyolefin insulation and laminated aluminium polyolefin sheath--Cables with integral suspension strand
|
GB/T 11326.6-1989
|
|
GB/T 11327.1-1989
|
Low-frequency cables and wires with PVC--Insulation and PVC sheath--General test and measuring methods
|
GB/T 11327.1-1989
|
|
GB/T 11327.1-1999
|
Low-frequency telecommunication cables and wires with PVC insulation and PVC sheath-Part 1: General test and measuring methods
|
GB/T 11327.1-1999
|
|
GB/T 11327.2-1989
|
Low-frequency cables and wires with PVC insulation and PVC sheath--Cables in pairs, triples, quads and quintuples for installation
|
GB/T 11327.2-1989
|
|
GB/T 11327.2-1999
|
Low-frequency telecommunication cable and wires with PVC insulation and PVC sheath. Part 2: Cables in pairs, triples, quads and quintuples for inside installation
|
GB/T 11327.2-1999
|
|
GB/T 11327.3-1989
|
Low-frequency cables and wires with PVC insulation and PVC sheath--Distribution cables in pairs
|
GB/T 11327.3-1989
|
|
GB/T 11327.3-1999
|
Low-frequency telecommunication cables and wires with PVC insulation and PVC sheath. Part 3: Terminating cables in pairs
|
GB/T 11327.3-1999
|
|
GB/T 11328-1989
|
Specification for 24-channel telephone carrier--Terminal equipment used on the symmetric pair of 1. 2/2. 4mm synthetical coaxial cable
|
GB/T 11328-1989
|
|
GB/T 11329-1989
|
Specification for direct through connection--Equipment of carrier systems
|
GB/T 11329-1989
|
|
GB/T 11330-1989
|
Specification for added equalization equipment of carrier systems supergroup link
|
GB/T 11330-1989
|
|
GB/T 1133-1984
|
Machine reamers with Morse taper shanks
|
GB/T 1133-1984
|
|
GB/T 11332-1989
|
Hygienic analytical method of rubber hose for food use
|
GB/T 11332-1989
|
|
GB/T 11334-1989
|
Cone tolerance
|
GB/T 11334-1989
|
|
GB/T 11334-2005
|
Geometrical Product Specifications (GPS) -- Cone tolerance
|
GB/T 11334-2005
|
|
GB/T 11335-1989
|
Limit deviations of angle without tolerance indication
|
GB/T 11335-1989
|
|
GB/T 11336-1989
|
Measurement of departures from straightness
|
GB/T 11336-1989
|
|
GB/T 11336-2004
|
Measurement of departures from straightness
|
GB/T 11336-2004
|
|
GB/T 11337-1989
|
Measurement of departures from flatness
|
GB/T 11337-1989
|
|
GB/T 11337-2004
|
Measurement of departures from flatness
|
GB/T 11337-2004
|
|
GB/T 11338-1989
|
Analytical methods of potassium-40 in water
|
GB/T 11338-1989
|
|
GB/T 1134-1984
|
Machine reamers with edge inclination Morse taper shanks
|
GB/T 1134-1984
|
|
GB/T 1134-2004
|
Machine reamers with edge inclination with Morse taper shanks
|
GB/T 1134-2004
|
|
GB/T 1134-2008
|
Machine reamers with edge inclination
|
GB/T 1134-2008
|
|
GB/T 11343-1989
|
Ultrasonic angle beam examination by the contact method
|
GB/T 11343-1989
|
|
GB/T 11343-2008
|
Non-destructive testing -- Practice for ultrasonic angle-beam testing by the contact method
|
GB/T 11343-2008
|
|
GB/T 11344-1989
|
Measuring thickness by ultrasonic pulse-echo contact method
|
GB/T 11344-1989
|
|
GB/T 11344-2008
|
Non-destructive testing -- Practice for measuring thickness by ultrasonic pulse-echo contact method
|
GB/T 11344-2008
|
|
GB/T 11345-1989
|
Method for manual ultrasonic testing and classification of testing results for ferritic steel welds
|
GB/T 11345-1989
|
|
GB/T 10009-1988
|
Acrylonitrile. Butadiene. Styrene (ABS) plastics extrusion plates
|
GB/T 10009-1988
|
|
GB/T 11346-1989
|
Standard radiographs for inspection grading of gas porosity(round) in aluminum alloy casting
|
GB/T 11346-1989
|
|
GB/T 11347-1989
|
Mechanical vibration of large rotating machines with speed range from 10 to 200 r/s--Measurement and evaluation of vibration severity in situ
|
GB/T 11347-1989
|
|
GB/T 11348.1-1989
|
Mechanical vibration of non-reciprocating machines--Measurements on rotating shafts and evaluation--Part 1: General guidelines
|
GB/T 11348.1-1989
|
|
GB/T 11348.1-1999
|
Mechanical vibration of non-reciprocating machines. Measurements on rotating shafts and evaluation criteria. Part 1: General guidelines
|
GB/T 11348.1-1999
|
|
GB/T 11348.2-1997
|
Mechanical vibration of non-reciprocating machines--Measurements on rotating shafts and evaluation criteria--Part 2: Large land-based steam turbine generator sets
|
GB/T 11348.2-1997
|
|
GB/T 11348.2-2007
|
Mechanical vibration -- Evaluation of machines vibration by measurements on rotating shafts -- Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1 500/r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min
|
GB/T 11348.2-2007
|
|
GB/T 11348.2-2012
|
Mechanical vibration -- Evaluation of machines vibration by measurements on rotating shafts -- Part 2: Land-based steam turbine-generators in excess of 50MW with normal operating speeds of 1500r/min, 1800r/min, 3000r/min and 3600r/min
|
GB/T 11348.2-2012
|
|
GB/T 11348.3-1999
|
Mechanical vibration of non-reciprocating machines--Measurements on rotating shafts and evaluation criteria-- Part 3: Coupled industrial machines
|
GB/T 11348.3-1999
|
|
GB/T 11348.3-2011
|
Mechanical vibration -- Evaluation of machine vibration by measurements on rotating shafts -- Part 3: Coupled industrial machines
|
GB/T 11348.3-2011
|
|
GB/T 11348.4-1999
|
Mechanical vibration of non-reciprocating machines. Measurements on rotating shafts and evaluation criteria. Part 4: Gas turbine sets
|
GB/T 11348.4-1999
|
|
GB/T 1001.1-2003
|
Insulators for overhead lines with a nominal voltage above 1000V- Part 1: Ceramic or glass insulator units for a.c. systems -- Definitions, test methods and acceptance criteria
|
GB/T 1001.1-2003
|
|
GB/T 11348.5-2002
|
Mechanical vibration of non-reciprocating machines -- Measurements on rotating shafts and evaluation criteria -- Part 5: Machine sets in hydraulic power generating and pumping plants
|
GB/T 11348.5-2002
|
|
GB/T 11348.5-2008
|
Mechanical vibration evaluation of machine vibration by measurements on rotating shafts -- Part 5: Machine sets in hydraulic power generating and pumping plants
|
GB/T 11348.5-2008
|
|
GB/T 11349.1-1989
|
Experimental determination of mechanical mobility--Basic definitions and transducers
|
GB/T 11349.1-1989
|
|
GB/T 11349.1-2006
|
Vibration and shock -- Experimental determination of mechanical mobility -- Part 1: Basic definitions and transducers
|
GB/T 11349.1-2006
|
|
GB/T 11349.2-1989
|
Experimental determination of mechanical mobility--Measurements using single-point translation excitation with an attached vibration exciter
|
GB/T 11349.2-1989
|
|
GB/T 11349.2-2006
|
Mechanical vibration and shock testing to determine admittance -- Part 2: Using a single point of translational vibration exciter excitation measurements
|
GB/T 11349.2-2006
|
|
GB/T 11349.3-1992
|
Experimental determination of mechanical mobility. Measurements using impact excitation
|
GB/T 11349.3-1992
|
|
GB/T 11349.3-2006
|
Vibration and shock -- Experimental determination of mechanical mobility -- Part 3: Measurement using impact excitation
|
GB/T 11349.3-2006
|
|
GB/T 11350-1989
|
Machining allowances on castings
|
GB/T 11350-1989
|
|
GB/T 11351-1989
|
Mass tolerances for castings
|
GB/T 11351-1989
|
|
GB/T 1135-1984
|
Shell machine reamers
|
GB/T 1135-1984
|
|
GB/T 1135-2004
|
Shell machine reamers and arbors
|
GB/T 1135-2004
|
|
GB/T 11352-1989
|
Carbon steel castings for general engineering purposes
|
GB/T 11352-1989
|
|
GB/T 1001.2-2010
|
Insulators for overhead lines with a nominal voltage above 1000V -- Part 2: Insulator strings and insulator sets for a.c. systems -- Definitions, test methods and acceptance criteria
|
GB/T 1001.2-2010
|
|
GB/T 11353-1989
|
Auxiliary tables for vibration generators--Methods of describing equipment characteristics
|
GB/T 11353-1989
|
|
GB/T 11354-1989
|
Steel-iron parts--Determination of nitrided case depth and metallographic examination of nitriding structure
|
GB/T 11354-1989
|
|
GB/T 10016-1988
|
Tree seed storage
|
GB/T 10016-1988
|
|
GB/T 11355-1989
|
V-belt drives--Calculation of power ratings
|
GB/T 11355-1989
|
|
GB/T 11355-2008
|
V-belt and V-ribbed belt drives -- Calculation of power ratings
|
GB/T 11355-2008
|
|
GB/T 11356.1-1997
|
Belt drives--Pulleys for classical and narrow V-belts drives (system based on datum width)--Geometrical inspection of grooves
|
GB/T 11356.1-1997
|
|
GB/T 11356.1-2008
|
Belt drives -- Pulleys for V-belts (system based on datum width) -- Geometrical inspection of grooves
|
GB/T 11356.1-2008
|
|
GB/T 11356.2-1997
|
Belt drives. Pulley for classical and narrow V-belts drives (system based on effective width). Geometrical inspection of groove
|
GB/T 11356.2-1997
|
|
GB/T 11356-1989
|
Pulley for classical and narrow V-belts drires--Geometrical inspection of groove
|
GB/T 11356-1989
|
|
GB/T 11357-1989
|
Quality, Surfaceroughness and balance of transmission pulleys
|
GB/T 11357-1989
|
|
GB/T 11357-2008
|
Quality, roughness and balance of transmission pulleys
|
GB/T 11357-2008
|
|
GB/T 11358-1989
|
Flat belt drive--Pulleys diameters
|
GB/T 11358-1989
|
|
GB/T 11358-1999
|
Belt drives. Flat transmission belts and corresponding pulleys. Dimensions and tolerances
|
GB/T 11358-1999
|