|
US$244.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 36148.3-2022: Ships and marine technology - Marine environment protection - Oil booms - Part 3: End connectors
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 36148.3-2022 | English | 244 |
Add to Cart
|
3 days [Need to translate]
|
Ships and marine technology - Marine environment protection - Oil booms - Part 3: End connectors
| Valid |
GB/T 36148.3-2022
|
PDF similar to GB/T 36148.3-2022
Basic data | Standard ID | GB/T 36148.3-2022 (GB/T36148.3-2022) | | Description (Translated English) | Ships and marine technology - Marine environment protection - Oil booms - Part 3: End connectors | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | U30 | | Classification of International Standard | 47.020.99; 13.020.99 | | Word Count Estimation | 14,112 | | Date of Issue | 2022-10-14 | | Date of Implementation | 2022-10-12 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 36148.3-2022: Ships and marine technology - Marine environment protection - Oil booms - Part 3: End connectors
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Ships and marine technology -- Marine environment protection -- Oil booms -- Part 3.End connectors
ICS 47.020.99; 13.020.99
CCSU30
National Standards of People's Republic of China
Ships and Offshore Technology Marine Environmental Protection Oil Booms
Part 3.End Connectors
Part 3.Endconnectors
(ISO 17325-3.2018, IDT)
Published on 2022-10-12
2022-10-12 Implementation
State Administration for Market Regulation
Released by the National Standardization Administration
directory
Preface III
Introduction IV
1 Scope 1
2 Normative references 1
3 Terms and Definitions 1
4 Design Considerations 1
5 Connector Type 2
6 Material property requirements8
7 Testing and recording 8
Reference 9
foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules of Standardization Documents"
drafted.
This document is part 3 of GB/T 36148 "Oil Booms for Marine Environmental Protection of Ships and Offshore Technology". GB/T 36148 has
The following sections have been published.
--- Part 1.Design requirements;
--- Part 2.Strength and performance requirements;
--- Part 3.End connectors.
This document is equivalent to ISO 17325-3.2018 "Oil Booms for Marine Environmental Protection in Ships and Offshore Technology - Part 3.End Connections"
Connector".
Please note that some content of this document may be patented. The issuing agency of this document assumes no responsibility for identifying patents.
This document is proposed and managed by the National Marine Machinery Standardization Technical Committee (SAC/TC137).
This document is drafted by. China Shipbuilding Industry Research Institute of Comprehensive Technology and Economics, Taizhou Jinhai Shipping Marine Equipment Co., Ltd., Qingdao
Guangming Environmental Protection Technology Co., Ltd., Qingdao Marine Equipment R&D Center Co., Ltd., Zhoushan Quality and Technical Supervision and Inspection Institute.
The main drafters of this document. Shen Hongbin, Lu Bing, Chen Haibin, Chen Xianlei, Leng Jiangnan, He Rui, Xiang Li, Hao Huadong, Lian Junshuai, Wei Huaxing.
Introduction
With the development of offshore oil, the consequent oil spill pollution is also serious year by year, posing a threat to people's living environment and the marine environment.
cause damage. The oil boom is the key equipment used to prevent the spread of oil spills, and each section of the oil boom needs to be connected by the end connector of the oil boom.
GB/T 36148 "Oil Booms for Marine Environmental Protection of Ships and Offshore Technology" aims at the design, performance, test and connection of oil booms
According to the requirements of equipment, auxiliary equipment, etc., it is used for the design, production and use of oil booms in the scope of regulation, and it is planned to be composed of the following parts.
--- Part 1.Design requirements. The purpose is to specify basic design requirements, general functions, markings and signs, and to specify that manufacturers are required to provide
Provided information on boom design, dimensions and materials, applicable to the design of the boom.
--- Part 2.Strength and performance requirements. The purpose is to specify the strength and performance requirements of the oil boom and the corresponding test methods.
Design and testing of strength and performance of oil booms.
--- Part 3.End connectors. The purpose is to specify the design of boom end connectors used to prevent the spread of oil spills at sea
requirements, and specifies the minimum mating characteristics of connectors, which are suitable for the design, production and use of end connectors.
--- Part 4.Auxiliary equipment. The purpose is to specify the design requirements of auxiliary equipment for oil boom, which is suitable for the design, production and production of auxiliary equipment.
production and use.
This document is part 3 of GB/T 36148.
Ships and Offshore Technology Marine Environmental Protection Oil Booms
Part 3.End Connectors
1 Scope
This document specifies the design requirements for oil boom end connectors (hereinafter referred to as connectors) used to prevent the spread of oil spills at sea, and specifies
The minimum mating characteristics of the connector are specified, but are not limited to a specific configuration.
Different types of connectors should be considered in different areas. This document does not define any priorities. Manufacturers and users are responsible for
Select the appropriate connector for the intended application.
The stable characteristics of the connector are the result of the interaction between the boom float and the connector.
This document is not intended to address all security concerns, if any, associated with its use. However, it is the responsibility of the user of this document to establish safety
Complete and healthy procedures and ensure compliance with regulatory requirements.
2 Normative references
The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, dated citations
documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to
this document.
ISO 16165 Ships and marine technology Marine environmental protection oil spill handling related terms (Ships and marine
Note. GB/T 21478-2016 Terminology related to oil spill handling for marine environmental protection of ships and marine technology (ISO 16165.2013, IDT)
ISO 17325-2 Marine environment protection booms for ships and marine technology - Part 2.Strength and performance requirements (Shipsand
Note. GB/T 36148.2-2018 Ships and Offshore Technology Marine Environmental Protection Oil Boom Part 2.Strength and Performance Requirements (ISO 17325-2.
2014, IDT).
3 Terms and Definitions
Terms and definitions defined in ISO 16165 apply to this document.
4 Design Considerations
The designed end connectors should have the following characteristics.
--- Sufficient mechanical strength;
---Minimum oil leakage;
--- There is no connection required for coordination (does not distinguish right or left potential);
--- the full height of the boom;
--- Do not damage the stability of the boom;
--- does not reduce freeboard;
--- No special assembly tools are required.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 36148.3-2022_English be delivered?Answer: Upon your order, we will start to translate GB/T 36148.3-2022_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 36148.3-2022_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 36148.3-2022_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|