|
Std ID |
Description (Standard Title) |
|
GB/T 39705-2020
|
Track bed vibration isolating mat for rail traffic
|
|
GB/T 37564-2019
|
Test method of creep performance for dipped cords
|
|
GB/T 38054-2019
|
Polyurethane part for tensioner used in offshore pipelay vessel
|
|
GB/T 38348-2019
|
Multipole magnetic rubber encoders
|
|
GB/T 38387-2019
|
Noise reduction rubber expansion joint device for bridges
|
|
GB/T 38391-2019
|
Rubber components for solar photovoltaic
|
|
GB/T 18241.3-2018
|
Rubber lining -- Part 3: Rubber lining for floatation machine
|
|
GB/T 36208-2018
|
Anticorrosion lining technical requirements and procedure evaluation for industrial exhaust gas systems
|
|
GB/T 36375-2018
|
Railway transportation -- Primary rubber spring suspension -- General technical requirement
|
|
GB/T 36363-2018
|
Polyolefin separator for lithium-ion battery
|
|
GB/T 36768-2018
|
Dipped polyamide canvas technical requirements and evaluation methods
|
|
GB/T 36795-2018
|
Dipped aramid cord fabric technical requirements and evaluation methods
|
|
GB/T 36798-2018
|
Test methods of diameter and weight of fixed length for dipped cords and yarns
|
|
GB/T 23659-2017
|
Rubber roller for copier
|
|
GB/T 31334.5-2017
|
Test methods for dipped canvas -- Part 5: Tensile properties
|
|
GB/T 34225-2017
|
Dipped aramid straight warp straight weft canvas technical requirements and evaluation methods
|
|
GB/T 34227-2017
|
Rubber wheel lining for passenger ropeway
|
|
GB/T 34228-2017
|
Dipped heat-resistant canvas -- Test method for adhesion strength at high temperature
|
|
GB/T 34232-2017
|
Rubber pad for tracked machines
|
|
GB/T 34235-2017
|
Dipped polyester canvas technical requirements and evaluation methods
|
|
GB/T 31334.4-2016
|
Test methods for dipped canvas -- Part 4: Hot air thermal shrinkage
|
|
GB/T 33091-2016
|
Sieve of polyurethane elastomer
|
|
GB/T 33092-2016
|
Polyurethane scraper of cleaning device for belt conveyor
|
|
GB/T 33096-2016
|
General technical specification for wind power rubber to metal parts
|
|
GB/T 33097-2016
|
Metro rigid catenary elastic suspension insulating component
|
|
GB/T 33099-2016
|
Test methods of stiffness for dipped reinforcing material -- Three-point bending
|
|
GB/T 33100-2016
|
Test methods of belt flexing fatigue for dipped cords
|
|
GB/T 33101-2016
|
Dipped flame-resistant canvas -- Test methods of burning character
|
|
GB/T 33330-2016
|
Polyamide 6 dipped cord fabric technical requirements and evaluation methods
|
|
GB/T 33331-2016
|
Polyamide 66 dipped cord fabric technical requirements and evaluation methods
|
|
GB/T 33338-2016
|
Test methods of twist for dipped yarns and cords
|
|
GB/T 18241.5-2015
|
Rubber lining -- Part 5: Anticorrosion lining with high temperature resistance for equipment
|
|
GB/T 20786-2015
|
Rubber track
|
|
GB/T 31334.1-2015
|
Test methods for dipped canvas -- Part 1: Adhesion strength
|
|
GB/T 31334.2-2015
|
Test methods for dipped canvas -- Part 2: Yarn crimp on warp and density
|
|
GB/T 31334.3-2015
|
Test methods for dipped canvas -- Part 3: Stiffness
|
|
GB/T 31399-2015
|
Sinking rubber roller for cold rolled sheet
|
|
GB/T 32104-2015
|
General technical requirement of polyurethane rubber cushions for rubber capsule processing machine
|
|
GB/T 32105-2015
|
Dipped polyester cord fabric technical requirements and evaluation methods
|
|
GB/T 32108-2015
|
Test methods of tensile properties for dipped yarns and cords
|
|
GB/T 32109-2015
|
Test methods of peel adhesion properties for dipped yarns and cord fabric
|
|
GB/T 32110-2015
|
Terms and definition of dipped reinforcing materials
|
|
GB/T 32111-2015
|
Rubber clamp ring for cutting cold-rolling sheet
|
|
GB/T 18173.3-2014
|
Polymer water-proof materials - Part 3: Hydrophilic expansion rubber
|
|
GB/T 30649-2014
|
Rubber articles for sound barriers
|
|
GB/T 30680-2014
|
Fluorine rubber sheet general technical conditions
|
|
GB/T 31061-2014
|
Cork-rubber gasket for shield-driven tunnel
|
|
GB/T 31333-2014
|
Dipped cords -- Test methods adhesion strength
|
|
GB/T 30310-2013
|
Determination of dip solids pickup on yarns and cords of synthetic fiber
|
|
GB/T 30311-2013
|
Test method for tensile properties of dipped aramid yarns and cords
|
|
GB/T 30312-2013
|
Test method for thermal shrinkage of yarns and cords
|
|
GB/T 30315-2013
|
Test method for reciprocating flex fatigue of dipped cords
|
|
GB/T 26518-2011
|
Reinforced and composite polymeric sheets for water proof
|
|
GB/T 23659-2009
|
Cots copier
|
|
GB/T 23660-2009
|
Building structure crack split-stopping tape
|
|
GB/T 21527-2008
|
Elastic pads for rail transit fasten system
|
|
GB/T 21537-2008
|
Cone rubber fender
|
|
GB/T 21538-2008
|
Rubber roller for metal foil-purpose coating
|
|
GB/T 21539-2008
|
Cement-purpose PU piston
|
|
GB/T 21897-2008
|
load-bearing waterproof sheet
|
|
GB/T 5574-2008
|
Industrial rubber sheet
|
|
GB/T 20688.1-2007
|
Rubber bearings -- Part 1: Seismic-protection isolators test methods
|
|
GB/T 20779.2-2007
|
Rubber for electric power safety -- Part 2: Rubber for cable accessories
|
|
GB/T 21282-2007
|
Rubber/plastics weatherstrip for automobile
|
|
GB/T 20779.1-2006
|
Rubber for electric power safety -- Part 1: General
|
|
GB/T 20786-2006
|
Rubber track
|
|
GB/T 20029-2005
|
Rubber isolation bearings for instruments and equipment
|
|
GB/T 18173.3-2002
|
Polymer water-proof materials -- Part 3 -- Hydrophilic expansion rubber
|
|
GB/T 5766-1996
|
Test method of Rockwell hardness for friction materials
|
|
GB/T 15520-1995
|
Test method for steam tightness of asbestos-rubber sheets
|
|
GB/T 3985-1995
|
Asbestos-rubber sheets
|
|
GB/T 539-1995
|
Oil-resisting asbestos-rubber sheets
|
|
GB/T 24786-2025
|
Single-use medical poly (vinyl chloride) examination gloves
|
|
GB/T 7543-2020
|
Single-use sterile rubber surgical gloves
|
|
GB/T 36796-2018
|
Rubber latex gloves for food services -- Limits for extractable substances
|
|
GB/T 35510-2017
|
Determination of released-particle count for closures of butyl rubber
|
|
GB/T 35511-2017
|
Biological requirements and test methods for closures of butyl rubber
|
|
GB/T 35512-2017
|
Characterization and identification for closures of butyl rubber
|
|
GB/T 19381-2015
|
Physical function requirements and testing for pharmaceutical closures of butyl rubber
|
|
GB/T 32103-2015
|
Rubber latex coated-fabric gloves for protection use
|
|
GB/T 21869-2008
|
Medical gloves -- Determination of removable surface powder
|
|
GB/T 21870-2008
|
Medical gloves made from natural rubber latex -- Determination of water-extractable protein using the modified Lowry method
|
|
GB/T 19381-2003
|
General methods of test for medical closures of butyl rubber
|
|
GB/T 10213-2025
|
Single-use medical rubber examination gloves
|
|
GB/T 46165-2025
|
Nitrile cleanroom glove
|
|
GB/T 46166-2025
|
Natu ralrubber latex cleanroom gloves
|
|
GB/T 46059-2025
|
Single-use rubber gloves for general applications
|
|
GB/T 41766-2022
|
Meteorological balloons
|
|
GB/T 39860-2021
|
Rapid identification of the surface residual mineral powder on latex products - X-ray diffraction spectrometry
|
|
GB/T 33325-2016
|
Latex rubber breast
|
|
GB/T 18943-2008
|
Cellular rubbers and plastics -- Determination of dynamic cushioning performance
|
|
GB/T 20467-2006
|
Flexible cellular polymeric materials -- Moulded and extruded sponge or expanded cellular rubber products -- Compressibility test on finished parts
|
|
GB/T 12825-2003
|
polymeric materials, cellular flexible -- Determination of hardness by indentation technique
|
|
GB/T 14274-2003
|
Polymeric materials cellular flexible -- Accelerated ageing tests
|
|
GB/T 14831-2003
|
Test method of resistance to steam ageing for rubber latex products
|
|
GB/T 18941-2003
|
Flexible cellular polymeric materials -- Determination of fatigue constant-load pounding
|
|
GB/T 18942.1-2003
|
Polymeric materials, cellular flexible -- Determination of stress-strain characteristic in compression -- Part 1: Low-density materials
|
|
GB/T 18942.2-2003
|
Flexible cellular polymeric materials -- Determination of stress-strain characteristics in compression -- Part 2: High-density materials
|
|
GB/T 18943-2003
|
Cellular rubbers and plastics -- Determination of dynamic cushioning performance
|
|
GB/T 18944.1-2003
|
Flexible cellular polymeric materials -- Sponge and expanded cellular rubber products -- Part 1: Sheeting
|