|
US$209.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 30315-2013: Test method for reciprocating flex fatigue of dipped cords
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 30315-2013 | English | 209 |
Add to Cart
|
3 days [Need to translate]
|
Test method for reciprocating flex fatigue of dipped cords
| Valid |
GB/T 30315-2013
|
PDF similar to GB/T 30315-2013
Basic data | Standard ID | GB/T 30315-2013 (GB/T30315-2013) | | Description (Translated English) | Test method for reciprocating flex fatigue of dipped cords | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | G47 | | Classification of International Standard | 83.140.99 | | Word Count Estimation | 9,968 | | Quoted Standard | GB/T 6529; GB/T 8170 | | Regulation (derived from) | National Standards Bulletin 2013 No. 27 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the use of rubber products dipped cord under a certain load reciprocating fatigue test methods cords after bending fatigue resistance of the subject. This standard applies dipped polyester (PET) cord, dipped polyamides (nylon) Dete | GB/T 30315-2013: Test method for reciprocating flex fatigue of dipped cords---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Test method for reciprocating flex fatigue of dipped cords
ICS 83.140.99
G47
National Standards of People's Republic of China
Fatigue Test Method dipped cords reciprocating Flexing
Issued on. 2013-12-31
2014-09-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
The standard proposed by China Petroleum and Chemical Industry Association.
This standard by the National Rubber and rubber products Standardization Technical Committee dipped skeleton material Technical Committee (SAC/TC35/SC13)
Centralized.
This standard is mainly drafted by. Horse Chemical Fiber Co., Ltd., Dah Sing Qingdao Branch Rubber Technology Services Limited, Qingdao University of Science and Technology.
The main drafters of this standard. Hao Zhenhua, Bing Xin, Liu Li, Huang Feng.
Fatigue Test Method dipped cords reciprocating Flexing
1 Scope
This standard specifies the use of rubber products dipped cords under a certain load reciprocating fatigue after bending the cord fatigue resistance test subject
method.
This standard applies to dipped polyester (PET) cords, dipped polyamide (nylon) Determination cord fatigue resistance properties, can also be used dipped polyester
Yarn, cord and dipped polyamide yarns, cord Determination of resistance to fatigue properties.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 6529 Textiles Standard conditioning and testing atmosphere
GB/T 8170 repair value expressed about the rules and limit values \u200b\u200band judgment
3 Test principle
Reciprocating Flexing fatigue test specimen is dipped cord bend radius greater than the minimum radius of curvature (see Appendix A), at certain load conditions
Next, the two freely rotatable guide roller A, B at the same time as the upper and lower reciprocating motion, so that the cord was measured by the bending fatigue resistance cord reciprocating fatigue after
The method of labor performance. Cord fatigue resistance can be broken when each cord Flexing fatigue reciprocating number of times that can also be used subject to certain
The number of reciprocating Flexing fatigue cord breaking strength retention to represent.
4 instruments and equipment
4.1 Reciprocating Flexing fatigue tester
Reciprocating flexing fatigue tester consists of freely rotatable guide roller, weight (including under the holder), the composition of the transmission and recording section, such as
Shown in Figure 1, it should have the following means.
a) You can adjust the frequency of reciprocation;
b) tension adjustment means may be;
c) You can set the number of reciprocating bending fatigue means;
d) reciprocating bending frequency counting means.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 30315-2013_English be delivered?Answer: Upon your order, we will start to translate GB/T 30315-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 30315-2013_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 30315-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|