|
Std ID |
Description (Standard Title) |
|
GB/T 14692-2008
|
Technical drawings -- Projection methods
|
|
GB/T 14693-2008
|
Non-destructive testing -- Symbolic representation on drawings
|
|
GB/T 15756-2008
|
General purpose metric screw threads -- Limits of sizes
|
|
GB/T 15830-2008
|
Non-destructive testing -- Practice for ultrasonic testing of circumferential butt welds in steel pipes and tubes
|
|
GB/T 16544-2008
|
Non-destructive testing -- Practice for gamma-ray radiographic testing by panoramic exposure
|
|
GB/T 16722.1-2008
|
Technical product documentation -- Handling of computer-based technical information -- Security requirements
|
|
GB/T 16722.2-2008
|
Technical product documentation -- Handling of computer-based technical information -- Original documentation
|
|
GB/T 16722.3-2008
|
Technical product documentation -- Handling of computer-based technical information -- Phases in the product design process
|
|
GB/T 16722.4-2008
|
Technical product documentation -- Handling of computer-based technical information -- Security requirements
|
|
GB/T 17455-2008
|
Non-destructive testing -- Metallographic replica techniques of surface examination
|
|
GB/T 18851.3-2008
|
Non-destructive testing -- Penetrant testing -- Part 3: Reference test blocks
|
|
GB/T 20485.1-2008
|
Methods for the calibration of vibration and shock transducers -- Part 1: Basic concepts
|
|
GB/T 20485.12-2008
|
Methods for the calibration of vibration and shock transducers -- Part 12: Primary vibration calibration by the reciprocity method
|
|
GB/T 20485.22-2008
|
Methods for the calibration of vibration and shock transducers -- Part 22: Shock calibration by comparison to a reference transducer
|
|
GB/T 21355-2008
|
Non-destructive testing -- Classification of computed radiology systems
|
|
GB/T 21356-2008
|
Non-destructive testing -- Qualification and long-term stability of computed radiology systems
|
|
GB/T 21487.1-2008
|
Rotating shaft vibration measuring systems -- Part 1: Relative and absolute sensing of radial vibration
|
|
GB/T 22028-2008
|
Hot-dip galvanized screw threads -- On internal screw threads there is the clearance for accommodating the hot-dip galvanized coat
|
|
GB/T 22029-2008
|
Hot-dip galvanized screw threads -- On external screw threads there is the clearance for accommodating the hot-dip galvanized coat
|
|
GB/T 22393-2008
|
Condition monitoring and diagnostics of machines -- General guidelines
|
|
GB/T 22394-2008
|
Condition monitoring and diagnostics of machines -- General guidelines on data interpretation and diagnostics techniques
|
|
GB/T 23901.5-2009
|
Non-destructive testing -- Image quality of radiographs -- Part 5: Image quality indicators (duplex wire type) -- Determination of image unsharpness value
|
|
GB/T 23902-2009
|
Non-destructive testing -- Ultrasonic examination -- Time-of-flight diffraction technique as a method for detection and sizing of discontinuities
|
|
GB/T 23903-2009
|
Resolution indicators for ray image
|
|
GB/T 23904-2009
|
Non-destructive testing -- Test method for ultrasonic testing by surface wave
|
|
GB/T 23905-2009
|
Non-destructive testing -- Blocks for ultrasonic testing
|
|
GB/T 23906-2009
|
Non-destructive testing - Rings for magnetic particle testing
|
|
GB/T 23907-2009
|
Non-destructive testing - Shims for magnetic particle testing
|
|
GB/T 23908-2009
|
Non-destructive testing -- Practice for ultrasonic pulse-echo straight-beam testing by the contact method
|
|
GB/T 23909.1-2009
|
Non-destructive testing -- Radioscopic testing -- Part 1: Quantitative measurement of imaging properties
|
|
GB/T 23909.2-2009
|
Non-destructive testing -- Radioscopic testing -- Part 2: Check of long term stability of imaging devices
|
|
GB/T 23909.3-2009
|
Non-destructive testing -- Radioscopic testing -- Part 3: General principles of radioscopic testing of metallic materials by X-rays and gamma rays
|
|
GB/T 23910-2009
|
Non-destructive testing -- Metal intensifying screens for radiographic testing
|
|
GB/T 23911-2009
|
Non-destructive testing -- Blocks for penetrant testing
|
|
GB/T 23912-2009
|
Non-destructive testing -- Practice for immersed ultrasonic testing by the reflection method using pulsed longitudinal waves
|
|
GB/T 24340-2009
|
Graphical symbols for use on electrical diagram of industrial machines
|
|
GB/T 24341-2009
|
Electrical equipment of industrial machines drawing of electrical diagrams, figure and table
|
|
GB/T 24630.1-2009
|
Geometrical Product Specifications (GPS) -- Flatness -- Part 1: Vocabulary and parameters of flatness
|
|
GB/T 24630.2-2009
|
Geometrical Product Specifications (GPS) -- Flatness -- Part 2: Specification operators
|
|
GB/T 24631.1-2009
|
Geometrical product specifications (GPS) -- Straightness -- Part 1: Vocabulary and parameters of straightness
|
|
GB/T 24631.2-2009
|
Geometrical product specifications (GPS) -- Straightness -- Part 2: Specification operators
|
|
GB/T 24632.1-2009
|
Geometrical Product Specifications (GPS) -- Roundness -- Part 1: Vocabulary and parameters of roundness
|
|
GB/T 24632.2-2009
|
Geometrical product specifications (GPS) -- Roundness -- Part 2: Specification operators
|
|
GB/T 24633.1-2009
|
Geometrical product specifications (GPS) -- Cylindricity -- Part 1: Vocabulary and parameters of cylindrical form
|
|
GB/T 24633.2-2009
|
Geometrical product specifications (GPS) -- Cylindricity -- Part 2: Specification operators
|
|
GB/T 24634-2009
|
Geometrical Product Specifications (GPS) -- General concepts and requirements for GPS measuring equipment
|
|
GB/T 24635.3-2009
|
Geometrical Product Specifications (GPS) -- Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement -- Part 3: Use of calibrated workpieces or standards
|
|
GB/T 24734.10-2009
|
Technical product documentation -- Digital product definition data practices -- Part 10: Application for geometric tolerances
|
|
GB/T 24734.11-2009
|
Technical product documentation -- Digital product definition data practices -- Part 11: Levels of geometrical detail
|
|
GB/T 24734.1-2009
|
Technical product documentation -- Digital product definition data practices -- Part 1: Terms and definitions
|
|
GB/T 24734.2-2009
|
Technical product documentation -- Digital product definition data practices -- Part 2: Data set identification and control
|
|
GB/T 24734.3-2009
|
Technical product documentation -- Digital product definition data practices -- Part 3: Requirements for data set
|
|
GB/T 24734.4-2009
|
Technical product documentation -- Digital product definition data practices -- Part 4: Requirements for design model
|
|
GB/T 24734.5-2009
|
Technical product documentation -- Digital product definition data practices -- Part 5: Common requirements for product definition data
|
|
GB/T 24734.6-2009
|
Technical product documentation -- Digital product definition data practices -- Part 6: Feature specification for geometrical modeling
|
|
GB/T 24734.7-2009
|
Technical product documentation -- Digital product definition data practices -- Part 7: Requirements for notes and special notations
|
|
GB/T 24734.8-2009
|
Technical product documentation -- Digital product definition data practices -- Part 8: Requirements for model values and dimensions
|
|
GB/T 24734.9-2009
|
Technical product documentation -- Digital product definition data practices -- Part 9: Application for datum applications
|
|
GB/T 24736.2-2009
|
Management guide for tooling design -- Part 2: Selection rule of tooling design
|
|
GB/T 24739-2009
|
Mechanical drawings -- Representation for declining component of mechanical parts
|
|
GB/T 24740-2009
|
Technical product documentation -- Symbol of mechanical manufacture orientation and clamping
|
|
GB/T 24741.1-2009
|
Technical drawings -- Simplified representation of the assembly of parts with fasteners -- Part 1: General principles
|
|
GB/T 24741.2-2009
|
Technical drawings -- Simplified representation of the assembly of parts with fasteners -- Prat 2: Rivets for aerospace equipment
|
|
GB/T 24742-2009
|
Technical product documentation -- Graphical symbols for process chart
|
|
GB/T 24743-2009
|
Technical product documentation -- Heat treated ferrous parts presentation and indications
|
|
GB/T 24744-2009
|
Geometrical product specifications (GPS) -- Drawing indications for moulded parts in technical product documentation (TPD)
|
|
GB/T 24745-2009
|
Technical product documentation -- Vocabulary -- Drawings note
|
|
GB/T 24746-2009
|
Technical drawings -- Symbolic presentation and indication of adhesive, fold and pressed joints
|
|
GB/T 3177-2009
|
Geometrical product specifications (GPS) -- Inspection of plain workpiece sizes
|
|
GB/T 10609.2-2009
|
Technical drawings -- Item lists
|
|
GB/T 10609.3-2009
|
Technical drawings -- Folding on documents
|
|
GB/T 10609.4-2009
|
Technical drawings -- Requirements for micro-copying
|
|
GB/T 10610-2009
|
Geometrical product specifications (GPS) -- Surface texture: Profile method -- Rules and procedures for the assessment of surface texture
|
|
GB/T 3505-2009
|
Geometrical product specifications (GPS) -- Surface texture: Profile method -- Terms, definitions and surface texture parameters
|
|
GB/T 4249-2009
|
Geometrical product specifications (GPS) -- Tolerancing principle
|
|
GB/T 4459.8-2009
|
Mechanical drawings -- Seals for dynamic application -- Part 1: General simplified representation
|
|
GB/T 4459.9-2009
|
Mechanical drawings -- Seals for dynamic application -- Part 2: Detailed simplified representation
|
|
GB/T 6062-2009
|
Geometrical product specifications (GPS) -- Surface texture: Profile method -- Nominal characteristic of contact (stylus) instruments
|
|
GB/T 6557-2009
|
Mechanical vibration -- Methods and criteria for the mechanical balancing of flexible rotors
|
|
GB/T 18851.2-2008
|
Non-destructive testing -- Penetrant testing -- Part 2: Testing of penetrant materials
|
|
GB/T 9445-2008
|
Non-destructive testing -- Qualification and certification of personnel
|
|
GB/T 11343-2008
|
Non-destructive testing -- Practice for ultrasonic angle-beam testing by the contact method
|
|
GB/T 11344-2008
|
Non-destructive testing -- Practice for measuring thickness by ultrasonic pulse-echo contact method
|
|
GB/T 11348.5-2008
|
Mechanical vibration evaluation of machine vibration by measurements on rotating shafts -- Part 5: Machine sets in hydraulic power generating and pumping plants
|
|
GB/T 1182-2008
|
Geometrical Product Specifications (GPS) -- Geometrical tolerancing -- Tolerances of form, orientation, location and run-out
|
|
GB/T 12359-2008
|
Metric trapezoidal screw threads -- Limits of sizes
|
|
GB/T 12604.5-2008
|
Non-destructive testing -- Terminology -- Terms used in magnetic particle testing
|
|
GB/T 12604.6-2008
|
Non-destructive testing -- Terminology -- Terms used in eddy current testing
|
|
GB/T 12604.9-2008
|
Non-destructive testing -- Terminology -- Terms used in infrared testing
|
|
GB/T 12605-2008
|
Non-destructive testing -- Test methods for radiographic testing of circumferential fusion-welded butt joints in metallic pipes and tubes
|
|
GB/T 13436-2008
|
Technical requirements for torsional vibration measuring instrument
|
|
GB/T 13576.1-2008
|
Buttress threads with the flank angles of 3 and 30 degrees -- Part 1: Profiles
|
|
GB/T 13576.2-2008
|
Buttress threads with the flank angles of 3 and 30 degrees -- Part 2: General plan
|
|
GB/T 13576.3-2008
|
Buttress threads with the flank angles of 3 and 30 degrees -- Part 3: Basic dimensions
|
|
GB/T 13576.4-2008
|
Buttress threads with the flank angles of 3 and 30 degrees -- Part 4: Tolerances
|
|
GB/T 13823.19-2008
|
Earth gravity law calibration of vibration and shock sensor calibration method
|
|
GB/T 13823.20-2008
|
Methods for the calibration of vibration and shock pick-ups -- Accelerometer resonance testing -- General methods
|
|
GB/T 14125-2008
|
Mechanical vibration and shock -- Measurement and evaluation of shock and vibration effects on sensitive equipment in buildings
|
|
GB/T 1415-2008
|
Metric threads where pressure-tight joints are made on the threads
|
|
GB/T 14689-2008
|
Technical drawings -- Size and layout of drawing sheets
|