GB/T 10609.2-2009_English: PDF (GB/T10609.2-2009)
Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
GB/T 10609.2-2009 | English | 189 |
Add to Cart
|
3 days [Need to translate]
|
Technical drawings -- Item lists
| Valid |
GB/T 10609.2-2009
|
GB 10609.2-1989 | English | RFQ |
ASK
|
3 days [Need to translate]
|
Technical drawings. Item lists
| Obsolete |
GB 10609.2-1989
|
GB/T 10609.2-1989 | English | 319 |
Add to Cart
|
3 days [Need to translate]
|
Technical drawings--Item lists
| Obsolete |
GB/T 10609.2-1989
|
Standard ID | GB/T 10609.2-2009 (GB/T10609.2-2009) | Description (Translated English) | Technical drawings. Item lists | Sector / Industry | National Standard (Recommended) | Classification of Chinese Standard | J04 | Classification of International Standard | 01.100.01 | Word Count Estimation | 8,867 | Date of Issue | 2009-11-30 | Date of Implementation | 2010-09-01 | Older Standard (superseded by this standard) | GB/T 10609.2-1989 | Quoted Standard | GB/T 4457.4; GB/T 10609.1; GB/T 10609.4; GB/T 14691; GB/T 17450 | Drafting Organization | Productivity Promotion Center in the machine | Administrative Organization | National Technical Committee of Standardization Technical product documentation | Regulation (derived from) | National Standard Approval Announcement 2009 No.14 (Total No.154) | Proposing organization | National Technical Product Documentation Standardization Technical Committee (SAC/TC 146) | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, China National Standardization Administration Committee | Summary | This standard specifies the technical drawings in detail the basic requirements of the column, contents, sizes and formats. This section applies to the assembly drawings used in parts list. Other technical drawings or technical nature of the document can also be fitted with reference to adoption. | Standard ID | GB 10609.2-1989 (GB10609.2-1989) | Description (Translated English) | Technical drawings. Item lists | Sector / Industry | National Standard | Classification of Chinese Standard | J04 | Date of Issue | 1989/3/22 | Date of Implementation | 1990/1/1 | Standard ID | GB/T 10609.2-1989 (GB/T10609.2-1989) | Description (Translated English) | Technical drawings--Item lists | Sector / Industry | National Standard (Recommended) | Classification of Chinese Standard | J04 | Classification of International Standard | 1.1 | Word Count Estimation | 8,889 | Date of Issue | 1989/3/22 | Date of Implementation | 1990/1/1 | Adopted Standard | ISO 7573-1983, NEQ | Regulation (derived from) | Announcement of Newly Approved National Standards 2009 No. 14 (No. 154 overall) | Proposing organization | People Republic of China Ministry of Machinery and Electronics Industry | Issuing agency(ies) | State Bureau of Technical Supervision |
GB/T 10609.2-2009
Technical drawings. Item lists
ICS 01.100.01
J04
National Standards of People's Republic of China
Replacing GB/T 10609.2-1989
Technical Drawing Parts List
Posted 2009-11-30
2010-09-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
GB/T 10609 "Technical Drawing" is divided into the following four parts.
--- GB/T 10609.1 Technical drawing title bar;
--- GB/T 10609.2 Technical Drawing Parts List;
--- Folding method GB/T 10609.3 Technical drawings of;
--- GB/T 10609.4 Technical drawings on microfilm copy of the original request.
This part is GB/T 10609.2-1989 "Technical Drawing Parts List" amendments.
In this part, the modified contents are.
--- All references GB to GB/T ;
--- All illustrations and tables add the appropriate diagram and table names.
This section of Appendix A normative appendix.
This part of the National Technical product documentation Standardization Technical Committee (SAC/TC146) and focal points.
This section is drafted. the machine Productivity Promotion Center of China Aviation Technology Institute, China Electronics Technology Group.
The main drafters of this section. thanks to Yang, XIA Xiao Li, Zhang Hongqi, Qiangyi, Pang Wei.
This part of the standard replaces the previous editions are.
--- GB/T 10609.2-1989.
Technical Drawing Parts List
1 Scope
This section GB/T 10609 specifies the basic requirements of technical drawings of the parts list, content, size and format.
This section applies to the assembly drawings used in the parts list. Technical drawings or other technical documents with the nature of the assembly can also refer to
use.
2 Normative references
The following documents contain provisions which, through reference GB/T 10609 in this section constitute provisions of this section. For dated reference documents
Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section
Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this
section.
GB/T 4457.4 Mechanical drawings Fatou line (GB/T 4457.4-2002, ISO 128-24.1999, Technical
drawings-Generalprinciplesofpresentation-Part 24. Linesonmechanicalengineeringdrawing,
MOD)
GB/T 10609.1 Technical Drawing title bar
GB/T 10609.4 Technical drawings on microfilm copy of the original request
GB/T 14691 Technical drawings font (GB/T 14691-1993, eqvISO 3098-1. 1974, ISO 3098-2. 1984)
GB/T 17450 Technical drawings Chart (GB/T 17450-1998, idtISO 128-20.1996)
3 Basic requirements
3.1 General assembly drawing should have the parts list.
Configuration 3.2 List in
3.2.1 Parts List generally disposed above the title bar assembly drawings, according to a bottom-up fill sequence (see Appendix A in Figure A.1 and
Figure A. 2). The number of cells which should be based on need. When the bottom-extended position is not enough, close to the bottom-left of the title bar
continue.
3.2.2 When assembling the figure can not be configured parts list at the top of the title bar can be used as assembly drawings Continued on page A4 format press presented separately (see
Appendix A in Figure A. 3 and Figure A. 4). The order should be extended from the top down. Also continuous plus pages, but it should be at the bottom of the configuration of the parts list
title.
3.3 When there are two or more than two of the same pattern, code-named assembly drawing, but when configured in accordance with 3.2.1 the parts list, the parts list should be placed first
Zhang on the assembly drawing.
Font Details column 3.4 should be consistent with GB/T 14691 in requirements.
3.5 Details of linear bar should be GB/T 17450 and the thick solid line and thin solid line requirements GB/T 4457.4 stipulated drawing.
3.6 microfilm copy of the required pattern, the parts list should meet the requirements of GB/T 10609.4 of.
4 Content
7.4.1 List in
List in general by the serial number, code, name, quantity, material, quality (single, total), zoning, notes, etc., but also according to the actual needs
increase or decrease.
......
|