|
US$349.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 24734.9-2009: Technical product documentation -- Digital product definition data practices -- Part 9: Application for datum applications
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 24734.9-2009 | English | 349 |
Add to Cart
|
3 days [Need to translate]
|
Technical product documentation -- Digital product definition data practices -- Part 9: Application for datum applications
| Valid |
GB/T 24734.9-2009
|
PDF similar to GB/T 24734.9-2009
Basic data | Standard ID | GB/T 24734.9-2009 (GB/T24734.9-2009) | | Description (Translated English) | Technical product documentation -- Digital product definition data practices -- Part 9: Application for datum applications | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J04 | | Classification of International Standard | 01.100.01 | | Word Count Estimation | 15,138 | | Date of Issue | 2009-11-30 | | Date of Implementation | 2010-09-01 | | Quoted Standard | GB/T 24734.1-2009 | | Adopted Standard | ISO 16792-2006, NEQ | | Regulation (derived from) | National Standard Approval Announcement 2009 No.14 (Total No.154) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the reference identifier for digital product definition process associated with the model, rule base target identifiers and related information. And gives the required baseline factors associated with the model coordinate system when. This section applies to the digital product definition of the relevant application, development, services and research. | GB/T 24734.9-2009: Technical product documentation -- Digital product definition data practices -- Part 9: Application for datum applications
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Technical product documentation.Digital product definition data practices Part 9. Application for datum applications
ICS 01.100.01
J04
National Standards of People's Republic of China
Technical product documentation - Digital product definition data practices
Part 9. Reference Application
(ISO 16792.2006, Technicalproductdocumentation-
Digitalproductdefinitiondatapractices, NEQ)
Posted 2009-11-30
2010-09-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Preface Ⅰ
1 Scope 1
2 Normative references 1
3 Terms and definitions
Claim 4 of the model 1
5 pairs of drawings of claim 11
Foreword
GB/T 24734 "Technical product documentation - Digital product definition data practices" is divided into 11 parts.
--- Part 1. Terms and definitions;
--- Part 2. Data set identification and control;
--- Part 3. Data collection requirements;
--- Part 4. Requirements for design model;
--- Part 5. General requirements for product definition data;
--- Part 6. Geometric Modeling feature specification;
--- Part 7. Comment claim;
--- Part 8. Numerical model and size requirements;
--- Part 9. Application of reference;
--- Part 10. Application of geometric tolerances;
--- Part 11. model geometry detail level.
This section GB/T 24734 "Technical product documentation - Digital product definition data practices" in section 9, provides for digital products
Reference identifier defined process with the CAD model associated with the reference target identifier and related information rules, and gives the reference elements
Requirements associated with the model coordinate system when relevant.
This section is based on the ISO 16792.2006 should be "technical product documentation - Digital product definition data practices" Chapter 10 "benchmarks
With "compiled this section and ISO 16792. The main technical degree of consistency 2006 Chapter 10 non-equivalent content difference
Differences are as follows.
--- Since the ISO 16792.2006 was not found in the text citation 30, so in this section 4.4c) add a reference text,
And this figure into this section as FIG. 4;
--- Since the ISO 16792.2006 was not found in the text a reference to the description of FIG. 37, and with the ISO 16792.2006 in Fig. 30 within
Yung repeat, it is the plan to delete.
This part of the National Technical product documentation Standardization Technical Committee (SAC/TC146) and focal points.
This section is drafted. the machine Productivity Promotion Center, China Electronics Technology Group Corporation 28th Research Institute, Beijing-soft Intentia letter
Information Technology Co., Ltd., Beijing Digital generous Technology Co., Ltd., Beijing Extech Information Technology Co., Ltd., Guangxi Yuchai Machinery Group has
Limited.
The main drafters of this section. Ding Hongyu, Zhang Hongqi, Chen Jingyu, Xiao Chengxiang, Shangfeng Wu, Yong Chun Hai, Chen Weidong, Yan Guangrong, Wenqiu Sheng,
Xiezheng Liang, Han Linlin, Wang Yunfeng.
Technical product documentation - Digital product definition data practices
Part 9. Reference Application
1 Scope
This section GB/T 24734 specifies the reference identifier for digital product definition process model associated with the reference target identification
Rules operators and related information, and gives the baseline requirements for the elements associated with the model coordinate system when.
This section applies to the digital product definition of the relevant application, development, services and research.
2 Normative references
The following documents contain provisions which, through reference GB/T 24734 in this section constitute provisions of this section. For dated reference documents
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 24734.9-2009_English be delivered?Answer: Upon your order, we will start to translate GB/T 24734.9-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 24734.9-2009_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 24734.9-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|