|
US$314.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 6062-2009: Geometrical product specifications (GPS) -- Surface texture: Profile method -- Nominal characteristic of contact (stylus) instruments
Status: Valid GB/T 6062: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 6062-2009 | English | 314 |
Add to Cart
|
3 days [Need to translate]
|
Geometrical product specifications (GPS) -- Surface texture: Profile method -- Nominal characteristic of contact (stylus) instruments
| Valid |
GB/T 6062-2009
|
| GB/T 6062-2002 | English | 559 |
Add to Cart
|
4 days [Need to translate]
|
Geometrical product specifications (GPS) -- Surface texture: Profile method -- Nominal characteristics of contact (stylus) instruments
| Obsolete |
GB/T 6062-2002
|
| GB/T 6062-1985 | English | 399 |
Add to Cart
|
3 days [Need to translate]
|
Stylus instruments for the measurement of surface roughness by the profile method--Profile recording instruments and profile meters by the system M
| Obsolete |
GB/T 6062-1985
|
PDF similar to GB/T 6062-2009
Basic data | Standard ID | GB/T 6062-2009 (GB/T6062-2009) | | Description (Translated English) | Geometrical product specifications (GPS) -- Surface texture: Profile method -- Nominal characteristic of contact (stylus) instruments | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J04 | | Classification of International Standard | 17.040.30 | | Word Count Estimation | 16,156 | | Date of Issue | 2009-03-16 | | Date of Implementation | 2009-11-01 | | Older Standard (superseded by this standard) | GB/T 6062-2002 | | Adopted Standard | ISO 3274-1996, IDT | | Regulation (derived from) | National Standard Approval Announcement 2009 No.2 (Total No.142) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the general structure and definitions for measuring the contour of the contact surface roughness and waviness (stylus) instruments. This standard also specifies the characteristics of the instrument outline assessment. And provides contact (stylus) instruments (meter contour and contour recorder) of the basic technical specifications. This standard applies to the actual contours assessment stylus instrument, to make the existing national standards can be used to assess the actual contour. | GB/T 6062-2009: Geometrical product specifications (GPS) -- Surface texture: Profile method -- Nominal characteristic of contact (stylus) instruments
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Geometrical product specifications (GPS) .Surface texture. Profile method.Nominal characteristic of contact (stylus) instruments
ICS 17.040.30
J04
National Standards of People's Republic of China
GB/T 6062-2009/ISO 3274.1996
Replacing GB/T 6062-2002
Geometrical product specifications (GPS)
Surface texture Profile method
The contact (stylus) instruments nominal characteristics
(ISO 3274.1996, IDT)
Posted 2009-03-16
2009-11-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This standard is equivalent to international standards ISO 3274.1996 "Geometrical Product Specifications (GPS) Surface texture Profile method in contact (touch
The nominal characteristic needle) type instrument "(in English). The ISO 3274 standard and the technical content. consistent with 1996, only according to GB/T 1.1-
Rules 2000, made the following editorial changes.
--- Remove the introduction of international standards;
--- With punctuation "," instead of punctuation "."
Nominal This standard replaces GB/T 6062-2002 "Geometrical Product Specifications Surface texture Profile method of contact (stylus) instruments of
characteristic".
This standard compared with GB/T 6062-2002 The main changes are as follows.
--- Revised standard covers and original home;
--- An increase of six normative references;
--- Will "change the static load" to "change the static load" and "dynamic measuring force" to "dynamic load", "probe measuring range" change
As "probing" and "the instrument's measurement range" to "measuring instrument" and "off rate" to "cut-off wavelength ratio."
This standard Annex A, Annex B, Annex C is informative appendix. This standard GPS location system in Appendix C.
The standard dimensions and geometry by the National Technical Committee of Standardization Technical Specification (SAC/TC240) and focal points.
This standard was drafted. the machine Productivity Promotion Center, Harbin Measuring & Cutting Tool Group Co., Ltd., Beijing Science detection measures
Research Institute, China Institute of Metrology.
The main drafters of this standard. Wang Xinling, Lang Yan Mei, Wang Zhongbin, Wu Xun, high Si Tian, Chen Jingyu.
This standard replaces the standards previously issued as follows.
--- GB/T 6062-1985, GB/T 6062-2002.
GB/T 6062-2009/ISO 3274.1996
Geometrical product specifications (GPS)
Surface texture Profile method
The contact (stylus) instruments nominal characteristics
1 Scope
This standard specifies the general outline and structure definitions for measuring contact surface roughness and waviness (stylus) instruments.
The standard also specifies the characteristics of the instrument outline assessment and provide contact (stylus) instruments (meter contour and contour recorder) of
Basic technical specifications.
This standard applies to the assessment of the actual profile of stylus instruments, to make the existing national standards can be used to assess the actual profile.
Note 1. The technical data on the contact (stylus) instrument characteristics provided by the manufacturer of the instrument being developed, and will be the future standard calibration method of
It is referenced.
standard.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 3505-2009 Geometrical product specifications (GPS) Surface texture Profile method - Terms, definitions and surface texture parameters
(ISO 4287.1997, IDT)
GB/T 10610-2009 Geometrical product specifications (GPS) Surface texture - Profile method for evaluation of the rules and structure of the side surface
Method ISO 4288.1997, IDT)
GB/T 18618 Geometrical product specifications (GPS) Surface texture Profile method - Motif parameters (GB/T 18618-2002,
eqv ISO 12085.1996)
GB/T 18777 Geometrical product specifications (GPS) Surface texture Profile method - Metrological characteristics of phase correct filters
(GB/T 18777-2002, eqv ISO 11562.1996)
GB/T 18778.1-2002 Geometrical product specifications (GPS) Surface texture Profile method has the characteristics of composite processing
Surface - Part 1. Filtering and general measurement conditions (eqv ISO 13565-1.1996)
GB/T 18778.2-2003 Geometrical product specifications (GPS) Surface texture Profile method has the characteristics of composite processing
Surface Part 2. linear material ratio curve Height characterization (ISO 13565-2.1996, IDT)
GB/T 18778.3-2006 Geometrical product specifications (GPS) Surface texture Profile method having stratified surface
Part 3. The material probability curve Height characterization (ISO 13565-3.1998, IDT)
GB/T 19067.1-2003 Geometrical product specifications (GPS) Surface texture Profile method - Part 1. Physical measurement standard
Associate (ISO 5436-1.1996, IDT)
GB /Z20308-2006 Geometrical product specifications (GPS) Master Plan (ISO /T R14638.1995, MOD)
3 Terms and Definitions
The following terms and definitions apply to this standard.
GB/T 6062-2009/ISO 3274.1996
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 6062-2009_English be delivered?Answer: Upon your order, we will start to translate GB/T 6062-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 6062-2009_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 6062-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 6062-2009?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 6062-2009 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|