|
Std ID |
Description (Standard Title) |
|
GB/T 7322-1997
|
Test method for pyrometric cone equivalent (refractoriness) of refractories
|
|
GB/T 16546-1996
|
Shaped refractory products. Packing, marking, transportation and storage
|
|
GB/T 14350-1993
|
Chemical analysis methods for zircon refractories
|
|
GB/T 14351-1993
|
Chemical analysis methods for fuse cast alumina refractories
|
|
GB/T 13794-1992
|
Pyrometric reference cones for laboratory use
|
|
GB/T 32283-2015
|
Test method for vapor attack on refractories for furnace superstructures
|
|
GB/T 4513.1-2015
|
Monolithic (unshaped) refractory products -- Part 1: Introduction and classification
|
|
GB/T 5069-2015
|
Chemical analysis of magnesia-alumina refractories
|
|
GB/T 5070-2015
|
Chemical analysis of refractories containing chrome
|
|
GB/T 51064-2015
|
Technical code for ground treatment of hydraulic fill
|
|
GB/T 51074-2015
|
Code for urban heating supply planning
|
|
GB/T 51075-2015
|
Code for installation of mineral processing equipment engineering
|
|
GB/T 51077-2015
|
Code for design of electric vehicle battery-swap station
|
|
GB/T 51082-2015
|
Code for coating design of industrial construction
|
|
GB/T 51083-2015
|
Standard for urban water conservation evaluation
|
|
GB/T 51086-2015
|
Standard for terminology of pharmaceutical laboratory engineering
|
|
GB/T 51089-2015
|
Code for installation and quality acceptance of knitting equipment engineering
|
|
GB/T 51090-2015
|
Code for installation and quality acceptance of yarn-dyed woven equipment engineering
|
|
GB/T 51095-2015
|
Code for construction cost consultation
|
|
GB/T 51100-2015
|
Assessment standard for green store building
|
|
GB/T 51103-2015
|
Code for construction and acceptance of electromagnetic shielding enclosure
|
|
GB/T 51106-2015
|
Energy conservation code for design of fossil fired power plants
|
|
GB/T 51109-2015
|
Code for installation and quality acceptance of spandex equipment
|
|
GB/T 51111-2015
|
Code for construction organization design of open-pit metal mine
|
|
GB/T 51117-2015
|
Technical code for engineering of digital synchronization network
|
|
GB/T 51121-2015
|
Code for construction and acceptance of wind power project
|
|
GB/T 51124-2015
|
Design code for potato storage facilities
|
|
GB/T 51125-2015
|
Code for joint construction and sharing of telecommunications stations
|
|
GB/T 51126-2015
|
Code for acceptance of wavelength division multiplexing (WDM) optical fiber transmission system engineering
|
|
GB/T 51129-2015
|
Standard for assessment of industrialized building
|
|
GB/T 51132-2015
|
Code for construction and quality acceptance of industrial non-ferrous metallic piping engineering
|
|
GB/T 51147-2015
|
Technical code for wastewater treatment facilities from nitramine explosives
|
|
GB/T 51152-2015
|
Code for engineering design of wavelength division multiplexing (WDM) optical fiber transmission systems
|
|
GB/T 51153-2015
|
Evaluation standard for green hospital building
|
|
GB/T 51154-2015
|
Code for engineering design of optical fiber submarine cable systems
|
|
GB/T 30870-2014
|
Classification of special dense shaped refractory products
|
|
GB/T 17912-2014
|
Dimensions of refractory bricks for rotary kilns
|
|
GB/T 2992.2-2014
|
Dimensions of refractory bricks -- Part 2: Terminology for shapes and brickworks of refractory bricks
|
|
GB/T 30757-2014
|
Classification of basic dense shaped refractory products containing from 7% to 50% residual carbon
|
|
GB/T 30758-2014
|
Refractory products -- Determination of dynamic Young’s modulus (MOE) by impulse excitation of vibration
|
|
GB/T 30873-2014
|
Refractory materials -- Determination of thermal shock resistance
|
|
GB/T 29650-2013
|
Refractory products -- Determination of resistance to carbon monoxide
|
|
GB/T 5071-2013
|
Refractory materials -- Determination of true density
|
|
GB/T 18301-2012
|
Refractory products -- Determination of resistance to abrasion at ambient temperature
|
|
GB/T 10325-2012
|
Shaped refractory products -- Rule of acceptance, sampling and inspection
|
|
GB/T 2992.1-2011
|
Dimensions of refractory bricks -- Part 1: Specification for general bricks
|
|
GB/T 5072-2008
|
Refractories -- Determination of cold compressive strength
|
|
GB/T 13794-2008
|
Pyrometric reference cones
|
|
GB/T 14983-2008
|
Refractory products -- Determination of alkali-resistance
|
|
GB/T 17105-2008
|
Classification of dense shaped refractory products -- Alumina-silica
|
|
GB/T 17601-2008
|
Refractory products -- Determination of resistance to sulfuric acid
|
|
GB/T 18931-2008
|
Classification of basic dense shaped refractory products containing less than 7% residual carbon
|
|
GB/T 22588-2008
|
Determination of thermal diffusivity or thermal conductivity by the flash method
|
|
GB/T 5989-2008
|
Refractory products -- Determination of refractoriness-under-load -- Differential method with rising temperature
|
|
GB/T 6901-2008
|
Chemical analysis of silica refractories
|
|
GB/T 7320-2008
|
Refractories -- Determination of thermal expansion
|
|
GB/T 21114-2007
|
Chemical analysis of refractory products by XRF -- Fused cast bead method
|
|
GB/T 3001-2007
|
Refractory products -- Determination of modulus of rupture at ambient temperature
|
|
GB/T 5988-2007
|
Refractory products -- Determination of permanent change in dimension on heating
|
|
GB/T 4984-2007
|
Chemical analysis of refractories containing zirconia
|
|
GB/T 7322-2007
|
Refractory products -- Determination of pyrometric cone equivalent (refractoriness)
|
|
GB/T 3007-2006
|
Refractories -- Determination of moisture content
|
|
GB/T 20511-2006
|
Refractory products -- Rules of model
|
|
GB/T 5990-2006
|
Refractory materials -- Determination of thermal conductivity -- Hot-wire method
|
|
GB/T 3002-2004
|
Refractory products -- Determination of modulus of rupture at elevated temperatures
|
|
GB/T 6901.1-2004
|
Chemical analysis of silica refractories -- Part 1: Determination of loss on ignition -- Gravimetric method
|
|
GB/T 6901.3-2004
|
Chemical analysis of silica refractories -- Part 3: Determination of silicon dioxide -- Hydrofluoric acid gravimetric method
|
|
GB/T 5072.2-2004
|
Dense shaped refractory products -- Determination of cold compressive strength -- Part 2: Test with packing
|
|
GB/T 5988-2004
|
Dense shaped refractory products -- Determination of permanent change in dimension on heating
|
|
GB/T 6901.10-2004
|
Chemical analysis of silica refractories -- Part 10: Determination of manganese oxide -- Atomic absorption spectrophotometric method
|
|
GB/T 6901.11-2004
|
Chemical analysis of silica refractories -- Part 11: Determination of phosphorus pentoxide -- Molybdenum blue photometric method
|
|
GB/T 6901.2-2004
|
Chemical analysis of silica refractories -- Part 2: Determination of silicon dioxide -- Gravimetric-molybdenum blue photometric method
|
|
GB/T 6901.4-2004
|
Chemical analysis of silica refractories -- Part 4: Determination of iron oxide-o-phenanthroline photometric method
|
|
GB/T 6901.5-2004
|
Chemical analysis of silica refractories -- Part 5: Determination of aluminium oxide -- Chrome azurol S photometric method
|
|
GB/T 6901.6-2004
|
Chemical analysis of silica refractories -- Part 6: Determination of aluminium oxide -- EDTA volumetric method
|
|
GB/T 6901.7-2004
|
Chemical analysis of silica refractories -- Part 7: Determination of titanium dioxide -- Diantipyrylmethane photometric method
|
|
GB/T 6901.8-2004
|
Chemical analysis of silica refractories -- Part 8: Determination of calcium oxide and magnesium oxide -- Atomic absorption spectrophotometric method
|
|
GB/T 6901.9-2004
|
Chemical analysis of silica refractories -- Part 9: Determination of potassium oxide and sodium oxide -- Atomic absorption spectrophotometric method
|
|
GB/T 7321-2004
|
Sample preparation for testing of shaped refractory products
|
|
GB/T 18930-2002
|
Terminology for refractories
|
|
GB/T 18931-2002
|
Classification of basic refractory products containing less than 7% residual carbon
|
|
GB/T 2999-2002
|
Refractory materials -- Determination of bulk density of granular materials
|
|
GB/T 18301-2001
|
Test method for abrasion resistance of refractory materials at room temperature
|
|
GB/T 10325-2001
|
Shaped refractory products -- Sampling and acceptance testing
|
|
GB/T 10326-2001
|
Refractory products -- Inspections of dimension appearance and section
|
|
GB/T 18257-2000
|
Refractory bricks for use in rotary kilns. Hot-face identification marking
|
|
GB/T 2997-2000
|
Test method for bulk density, apparent porosity and true porosity of dense shaped refractory products
|
|
GB/T 3001-2000
|
Shaped refractory products-Determination of modulus of rupture at ambient temperature
|
|
GB/T 7320.1-2000
|
Refractory materials-Determination of thermal expansion (Telescope method)
|
|
GB/T 7320.2-2000
|
Petroleum products--Lubricating greases and oils--Determination of evaporation loss
|
|
GB/T 17732-1999
|
Dense, shaped refractory products--Test methods for products containing carbon
|
|
GB/T 17912-1999
|
Refractory bricks for rotary kilns-Dimensions
|
|
GB/T 3000-1999
|
Dense shaped refractory products. Determination of permeability to gases
|
|
GB/T 17601-1998
|
Dense shaped refractory products--Determination of resistance to sulfuric acid
|
|
GB/T 17617-1998
|
Refractory products. Sampling of raw materials and unshaped products
|
|
GB/T 2992-1998
|
Dimensions of general bricks
|
|
GB/T 5072.1-1998
|
Dense, shaped refractory products--Determination of cold compressive strength--Part 1: Referee test without packing
|
|
GB/T 5989-1998
|
Refractory products--Determination of Refractoriness-under-load--Differential-with rising temperature
|
|
GB/T 17105-1997
|
Classification of dense shaped refractory products
|
|
GB/T 5071-1997
|
Refractory materials--Determination of true density
|