PDF Actual Sample: GB/T 3007-2006 (PDF-excerpt released/modified date: 2016-11-24/2019-03-24. Translated/reviewed by: Wayne Zheng et al.)
| Standard ID | GB/T 3007-2006 (GB/T3007-2006) |
| Description (Translated English) | Refractories. Determination of moisture content |
| Sector / Industry | National Standard (Recommended) |
| Classification of Chinese Standard | Q40 |
| Classification of International Standard | 81.080 |
| Word Count Estimation | 5,596 |
| Date of Issue | 2006-09-30 |
| Date of Implementation | 2007-02-01 |
| Older Standard (superseded by this standard) | GB/T 3007-1982 |
| Quoted Standard | GB/T 8170; GB/T 17617-1998 |
| Drafting Organization | Sinosteel Luoyang Institute of Refractories Research |
| Administrative Organization | National Standardization Technical Committee refractories |
| Regulation (derived from) | China National Standard Approval Announcement 2006 No.10 (Total No.97) |
| Proposing organization | National Refractories Standardization Technical Committee (SAC/TC 193) |
| Issuing agency(ies) | Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China; Standardization Administration of China |
| Summary | This standard specifies the definitions and test methods for refractory moisture content. This standard applies to the determination of the water content of refractory materials and products. This standard does not apply in the measured temperature refractory material containing volatile organic compounds. |
ENGLISH: GB/T 3007-2006 (Translated) GB/T 3007-2006
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 81.080
Q 40
GB 3007-2006
Replacing GB/T 3007-1982
Refractory – Determination of Moisture Content
耐火材料 含水量试验方法
ISSUED ON. SEPTEMBER 20, 2006
IMPLEMENTED ON. FEBRUARY 1, 2007
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine of the People's Republic of China;
Standardization Administration of the People's Republic of
China.
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative References ... 4
3 Definition ... 4
4 Principle ... 4
5 Equipment ... 5
6 Sampling ... 5
7 Test Procedure ... 5
8 Calculation and Determination of Results ... 5
9 Test Report ... 6
Refractory – Determination of Moisture Content
1 Scope
This Standard specifies the definition of and test method for moisture content of
refractory.
This Standard applies to the determination of moisture content of refractory materials
and products.
This Standard does not apply to the refractory materials containing volatile organic
matters under the measuring temperature.
2 Normative References
The provisions in following documents become the provisions of this Standard through
reference in this Standard. For dated references, the subsequent amendments
(excluding corrigendum) or revisions do not apply to this Standard, however, parties
who reach an agreement based on this Standard are encouraged to study if the latest
editions of these documents are applicable. For undated references, the latest edition
of the referenced document applies.
GB/T 8170 Rules of Rounding off for Numerical Values
GB/T 17617-1998 Refractory Products--Sampling of Raw Materials and
Unshaped Products
3 Definition
Moisture content
It is the ratio between the mass of free water contained in a refractory material sample
and the original mass of the sample, with the values expressed in %.
4 Principle
The sample of a refractory material is dried at 105°C to 110°C and its loss in mass is
the mass of free water contained by the sample.
......
(Above excerpt released/modified date: 2016-11-24 / 2019-03-24. Translated/reviewed by: Wayne Zheng et al.)
https://www.chinesestandard.net/PDF.aspx/GBT3007-2006