GB/T 10325: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 10325-2012 | English | 150 |
Add to Cart
|
0--9 seconds. Auto-delivery
|
Shaped refractory products -- Rule of acceptance, sampling and inspection
| Valid |
GB/T 10325-2012
|
| GB/T 10325-2001 | English | RFQ |
ASK
|
6 days [Need to translate]
|
Shaped refractory products -- Sampling and acceptance testing
| Obsolete |
GB/T 10325-2001
|
| GB/T 10325-1988 | English | 199 |
Add to Cart
|
2 days [Need to translate]
|
Refractory products--Instructions on stacking, sampling, acceptance, storage and transporting
| Obsolete |
GB/T 10325-1988
|
PDF similar to GB/T 10325-2012
Basic data | Standard ID | GB/T 10325-2012 (GB/T10325-2012) | | Description (Translated English) | Shaped refractory products -- Rule of acceptance, sampling and inspection | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | Q40 | | Classification of International Standard | 81.080 | | Word Count Estimation | 21,272 | | Older Standard (superseded by this standard) | GB/T 10325-2001 | | Quoted Standard | GB/T 7321, GB/T 8170 | | Adopted Standard | ISO 5022-1979, NEQ | | Regulation (derived from) | National Standards Bulletin 2012 No. 28 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the shaped refractory products Acceptance sampling terminology, definitions, symbols, acceptance sampling preparation before sampling the implementation of the rules determining the quality of products as well as acceptance samplin | GB/T 10325-2012: Shaped refractory products -- Rule of acceptance, sampling and inspection---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS81.080
Q40
National Standards of People's Republic of China
Replacing GB/T 10325-2001
Shaped refractory products - Sampling and acceptance testing rules
Shapedrefractoryproducts-Ruleofacceptance, samplingandinspection
(ISO 5022. 1979, Shapedrefractoryproducts-Samplingandacceptancetesting,
NEQ)
Issued on. 2013-05-01 2012-11-05 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Introduction Ⅲ
1 Scope 1
2 Normative references 1
3 Terms and definitions
4 Symbol 3
5 ready acceptance sampling inspection before 4
Example 6 sampling of 5
Acceptance or rejection of batches of 97 test
8 9 acceptance sampling inspection report
Appendix A (informative) Acceptance sampling Application Example 11
Annex B (informative) calculate the standard deviation of the batch quality characteristics estimate 15
K value calculation formula parameters in Appendix C (informative) physical and chemical characteristics of quality sampling program set 17
Foreword
This standard rule according to GB/T 1.1-2009 given draft.
This standard replaces GB/T 10325-2001 "refractory products - Sampling and acceptance", compared with the GB/T 10325-2001, the main technical
Changes are as follows.
--- Provisions range canceled singlet, adding "one of major, especially the small and precious shaped refractory products acceptance sampling, can refer to this
Standards ";
--- Increased 13 terms and definitions;
--- Increasing the symbol;
--- General will be modified to prepare before sampling, the definition of quality characteristics increase was statistically significant indicators of product quality standards,
The basic contents of sampling procedures;
--- The 100t ~ 300t to 500t batch is adjusted to not more than one batch, adding specific steps;
--- The "non-destructive inspection" was changed to "look and size sampling," and the distinction between appearance and size, appearance and provides
Can receive quality sampling size limit AQL, revised sampling plan table, detailed processing substandard batches;
--- The "destructive testing" to "the quality of the physical and chemical characteristics of sampling" and add the sample to extract the contents, and modify the sampling plan
Product quality characteristics of individual qualified to determine the rules;
--- Increase the "acceptance sampling inspection report";
--- In Appendix A is amended as "acceptance sampling inspection Instance";
--- Added Appendix B quality characteristics batch standard deviation estimate σ ^ calculated;
--- Increasing the K value calculation formula parameters in Appendix C physical and chemical characteristics of quality sampling program set.
The standard reference method using redrafted ISO 5022. 1979 "shaped refractory products - Sampling and acceptance testing" preparation, and ISO 5022.
1979 non-equivalent.
This standard by the National Standardization Technical Committee Refractories (SAC/TC193) and focal points.
This standard was drafted. Metallurgical Industry Information Standards Institute, Sinosteel Luoyang Institute of Refractories Co., ACRE Coking & Refractory Engineering
Cheng Technology Co., Ltd., Shandong Refractories Group, Lu resistance Ceramic Co., Ltd., Xixiaoping Refractories Company, Wuhan Iron and Steel Refractories Company, Wuxi City Southern
Party Refractories Corporation, China Building Materials Academy Skandia companies.
The main drafters of this standard. Luyi Guo, Gao Jianping, Wang Xiaorui, Chou Jinhui Peng West High, the king of literature, Hao Liangjun, Yan Su Xiang, Yuan Lin, Jiang Yue,
Mo Ying, Cai Guoqing, Xu Mengfang.
This standard supersedes the previous release version of the case.
--- GB/T 10325-1988, GB/T 10325-2001.
Shaped refractory products - Sampling and acceptance testing rules
1 Scope
This standard specifies the shaped refractory products acceptance sampling terms, definitions, symbols, ready acceptance sampling before sampling test
Implementation, product quality to determine the rules and acceptance sampling inspection reports.
This standard applies to general acceptance of shaped refractory products for sampling. Single King, especially the small and precious shaped refractory products acceptance draw
Sample test, execution may refer to this standard.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated edition applies to this article
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 7321 shaped refractory products sample preparation method
GB/T 8170 represents rounding off rules and limit values \u200b\u200band judgment
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1
Unit product item
And a thing that can be considered independently described in this standard, a middle refractory products.
3.2
Batch lot
In order, the sampling inspection, and an overall determining portion under substantially the same conditions thereof.
3.3
Batch lotsize
The number of units of the product batch.
3.4
Sample sample
Taken from a batch, and to provide a product or a group of related batch information.
3.5
Sample size samplesize
The number of units of product samples.
3.6
Sampling plan samplingscheme
The sample size and the corresponding batch acceptance criteria used in the composition of the program.
|